Skip to main content

Add late fees

Add a fee when an invoice isn't paid on time: once, or repeating until it's paid.

M
Written by Michael Bollinger

Add a fee when an invoice isn't paid on time: once, or repeating until it's paid. You can add late fees when you create an invoice, to a recurring template so every invoice gets them, or to existing invoices. This article also covers how to stop, remove, waive or change a late fee:

Where is the late fee setting? Late fees are set up in Invoices, on each invoice and each recurring template. There's no place in Settings to configure late fees; the only late-fee options there are the two preferences under Late fee settings at the end of this article. A late fee is always tied to one invoice, never to a unit's whole balance.

Add a late fee

To add a late fee to every future invoice, open the recurring template: Invoices → Recurring templates → ⋯ → Edit. To add one to a single invoice, click ⋯ → Edit on that invoice.

  1. In the Add charge or Edit charge form, turn on Late fees. Late fee 1 appears.

  2. Choose how it's Charged:

    • Once — a single fee.

    • Until paid — repeats on a schedule until the invoice is paid.

  3. Choose the Fee calculation: Flat amount, Percentage of charge balance, or Percentage of charge balance + fees (which includes earlier late fees, so it compounds).

  4. Enter the Fee amount (or Fee rate, between 0.01% and 100%) and Days after the due date ("Enter 1 day or more: a late fee starts after the due date.").

  5. For Until paid, set Repeats every and the Unit (days, weeks, months or years).

  6. Pick the Late fee category, the income account for late fees.

A sentence under each fee spells out exactly what will happen. Click Add another late fee to stack fees, such as a flat fee and then monthly interest.

To add or change late fees on many invoices at once, tick them and use Actions → Edit. See Edit invoices.

Good to know

  • Invoices are already overdue and had no late fee. Editing the recurring template changes only invoices created after you save. For invoices that already exist, click Filters → Invoice status → Overdue, tick them, then Actions → Edit → Add late fee. There you set the date the fee Applies on (or First applies on for a repeating fee) rather than days after the due date, so you can start it on, say, the 1st of next month. The date must be after the invoices' due dates. If you pick a date that has already passed, the fee is added at the next run, and a repeating fee adds every interval it missed since that date.

  • Can I set a fee today that starts next quarter? Not on a template: a template's fee applies to every invoice created from now on, the set number of days after each due date. To start later, edit the template later, or add the fee to existing invoices with the bulk edit above and choose the start date there.

  • Our documents say 18% per year. Enter the monthly rate, 1.5%: Until paid, Fee rate 1.5, Repeats every 1 Month. For the Fee calculation, pick Percentage of charge balance for simple interest: each month's fee is 1.5% of what's still unpaid on the invoice. Pick Percentage of charge balance + fees only if the interest should compound, that is, if each month's 1.5% should also be charged on earlier late fees that are still unpaid.

    This table shows what a 1.5% monthly late fee adds to a $100.00 invoice that stays completely unpaid, with each calculation:

    Month: 1 Percentage of charge balance (simple): 1.5% of $100.00 = $1.50 Percentage of charge balance + fees (compounding): 1.5% of $100.00 = $1.50

    Month: 2 Percentage of charge balance (simple): 1.5% of $100.00 = $1.50 Percentage of charge balance + fees (compounding): 1.5% of $101.50 = $1.52

    Month: 3 Percentage of charge balance (simple): 1.5% of $100.00 = $1.50 Percentage of charge balance + fees (compounding): 1.5% of $103.02 = $1.55

    With compounding, each month's fee is worked out on the invoice plus the late fees already added to it that are still unpaid, so the fee grows a little each month. Each fee is rounded to the nearest cent.

  • I want the late fee dated today on an old invoice. In the Edit charge form a late fee is set by Days after the due date, not by a date, so on an invoice that's already overdue, enter the number of days from its due date to today (or to the day you want). The sentence under the fee shows the date it works out to. A small number, such as 1, on an invoice that was due months ago gives a fee dated months ago. Picking the date itself (Applies on) is only offered in the bulk edit described in the first point above, which opens when two or more invoices are ticked; with one invoice ticked, Actions → Edit opens the same single form.

  • Interest on the whole account balance. A late fee is always tied to one invoice. There's no setting that charges a percentage of everything a unit owes as one line, and separate late-fee invoices can't be merged. Put the same percentage rule on every open invoice and the total comes out the same; if you need a single line each month, create a one-time Interest invoice yourself.

  • Stop a repeating late fee after a set number of times. An Until paid late fee has no end date and no limit on how many times it's added: it repeats until the invoice is paid, deleted or forgiven, or until you use Remove late fees on the invoice. To charge a fixed number of late fees, don't use Until paid. Add that many Once fees with Add another late fee, each with its own Days after the due date, for example 15, 45 and 75 days for three fees a month apart. Each one is added once and nothing follows the last. This matters most for quarterly or yearly billing: every invoice carries its own late-fee rule, so an owner who still owes last quarter's invoice gets that invoice's Until paid fee as well as any fee on the new quarter's invoice. To stop the fees on the older invoice when the next cycle is issued, tick it and click Actions → Remove late fees. To ask for a limit on repeats, see How do I suggest a feature?

  • One unit shouldn't get late fees (bankruptcy, a legal hold). A template's late fee applies to every unit it bills; editing from a unit's page with Only this unit changes the amount, not the fee. Use Remove late fees on that unit's existing invoices, and for future ones take the unit off the template and bill it with a second recurring invoice that has no late fee.

How late fees appear

  • Each late fee is its own invoice, grouped under the original. Click the arrow on the row to see them.

  • What is "Combined late fees"? In the invoice lists, and on the owner's payment screen, the late fees added to one invoice are rolled up into a single row titled Late Fees, described as Combined late fees (3). The number is how many late fees are in the group, and the row's amount is their total. It isn't a duplicate or an extra charge. Click the arrow on that row to see each late fee with its own date and amount. (Older screens had a Show Details link for this; the arrow replaced it.)

  • A separate Late Fee row next to the Late Fees group. Only fees added by a late-fee rule are grouped under their invoice. A late fee that shows as its own row, outside the group, was created by hand as an ordinary invoice. If it charges for the same thing as a fee in the group, delete one of them.

  • Under the invoice you'll see notes such as "Pay by MM/DD/YYYY to avoid a $X late fee."

  • On a one-time invoice, a late fee starts at least 1 day after the due date. On a recurring template it can start on the due date.

  • Once a late fee has been added, its date can't change and the invoice's due date can't move past it.

How late fees are calculated

  • Fees are added within half an hour of the fee date arriving and are dated the start of that day in your association's time zone.

  • The fee is an invoice titled Late Fee, with a description such as 1.5% ($15.00) late fee for charge "Dues" due on 1/1/2026.

  • A percentage fee uses the invoice's remaining balance, not the original amount. Percentage of charge balance + fees adds only the unpaid part of earlier fees.

  • Is a percentage late fee calculated on the original balance or the remaining balance? On the remaining balance: what is still unpaid on the invoice on the day the fee is added. A 5% fee on a $100.00 invoice with $40.00 already paid is $3.00, not $5.00. The sentence under the fee in the charge form says the same: "1.5% of the unpaid balance".

  • If a repeating fee was skipped while the balance was zero, for example after a returned payment, the missed fees are added together once the balance comes back.

  • The late-fee invoice uses the deposit account of its original invoice (or your current deposit account if that one was removed).

Remove late fees

Remove late fees stops future fees. It never removes a fee that has already been added.

  • ⋯ on the invoice → Remove late fees → Yes, remove them.

  • For several invoices: tick them → Actions → Remove late fees.

  • In the Edit charge form for one invoice, the trash icon on Late fee 1 (a red X on older screens) does the same thing: it removes the rule so no more fees are added. It doesn't delete a fee that's already on the account.

  • To waive a fee that was already added, delete or forgive that late-fee invoice; it's its own invoice under the original. See Delete, forgive, reinstate or archive.

Does Remove late fees remove a late fee that was already added? No. Remove late fees removes the late-fee rule from the invoice, so nothing more is added. Late fees that were added before you clicked it stay on the owner's balance until you delete or forgive them, as described next.

Don't waive a late fee with an account credit. Recording a payment with Method → Account credit against a late-fee invoice doesn't remove the fee; it marks the fee as paid. The owner's history then shows a late fee and a payment that never happened, and on accrual books the fee stays in your late-fee income with the same amount added to the Account Credits expense category. To waive a late fee, delete the late-fee invoice: the fee and its income are removed.

The owner already paid the late fee, and the board has waived it. Delete the paid late-fee invoice; you'll find it on the All invoices tab, not on Outstanding invoices. The payment becomes an account credit on the unit, and PayHOA applies that credit to the unit's next open invoice. To give the money back instead, see Refund an owner's payment.

I clicked Remove late fees but the fee is still on the account. That's expected: Remove late fees only cancels fees that haven't been added yet. A fee that's already there is its own invoice titled Late Fee, nested under the original. Click the arrow on the row to expand it, then ⋯ on the late-fee invoice → Delete charge (or Forgive remainder if you want it on record as written off). To clear several at once, on the Invoices page or the unit's All invoices tab click Filters, set Charge to Late Fee, Apply filters, tick them and use Actions → Delete.

A check arrived on time but was posted late, so a fee was added. Delete the late-fee invoice as above. If the original invoice still has a balance and an Until paid fee, also use Remove late fees on it so another fee doesn't appear next month.

We want to skip late fees for one month only. Use Actions → Remove late fees on that month's invoices before the fee date. The template keeps its fees for later months.

Stop a late fee that keeps coming back

A late fee that keeps coming back, every month or on every new billing cycle, is being added by a late-fee rule that is still switched on. The rule can sit in two places: on the recurring template, and on each invoice that already exists. Deleting the late-fee invoices doesn't switch either rule off, so the next fee still arrives. To stop late fees for good, do all three steps:

  1. Take the late fee off the recurring template. Click Invoices → Recurring templates → ⋯ on the template → Edit. Under Late fees, click the trash icon on each late fee (or turn Late fees off), then click Update charge. Invoices created after you save have no late fee.

  2. Take the late fee off the invoices that already exist. Every invoice keeps the late-fee rule it was created with, whatever you do to the template afterwards. On the Invoices page, open the Outstanding invoices tab and tick the invoices that should stop getting late fees. That tab lists every unpaid invoice, including Future ones you created early. Then click Actions → Remove late fees → Yes, remove them.

  3. Delete the late fees you don't want. Fees that were already added stay until you delete them. See Remove late fees above.

  • I deleted the recurring template, or we don't have one any more, and late fees are still being added. Deleting a template leaves the invoices it already created, and each of those still carries its own late-fee rule. An Until paid rule adds another fee every interval until that invoice is paid. Do step 2.

  • I removed the late fees and they came back on the next billing cycle. The template still has the late fee, so every new invoice gets it. Do step 1.

  • Pausing the template doesn't fix it. A paused template keeps its settings, and the invoices it creates after you resume carry the same late fee. Edit the template instead. You don't need to delete the template and build a new one.

Change a late fee amount

To change a late fee amount, for example to lower a $25 late fee to $10, change it in up to three places. The recurring template, the invoices that already exist and the fees already added each keep their own copy, so a change to one doesn't reach the others.

  1. Future invoices: change the recurring template. Click Invoices → Recurring templates → ⋯ on the template → Edit. Under Late fee 1, change the Fee amount (or Fee rate), then click Update charge. Only invoices created after you save use the new amount.

  2. Invoices that already exist: change each invoice's late fee. For one invoice, click ⋯ → Edit, change the Fee amount and click Update charge. For many, tick them, click Actions → Edit → Add late fee, enter the new fee and click Save charges. The late fee you add here replaces every late fee already set on the ticked invoices; it isn't added on top of them, so you don't need to tick Remove late fees first. Set Applies on (or First applies on) to the next date the fee should be added. If you pick a date that has already passed, the new fee is added for that date too, even where the old fee was already added.

  3. Late fees already added: they keep the old amount. Each one is its own Late Fee invoice. To change them, click Filters, set Charge to Late Fee, click Apply filters, tick them, then click Actions → Edit and enter the new Amount, or click Actions → Delete to remove them.

  • To change the day the fee is charged rather than its amount, see Change the day a late fee applies below.

  • The Actions menu is greyed out, or I can't find it. Tick at least one invoice first; until then most items in Actions are greyed out. If there's no Actions button at all, you don't have Invoices write access; ask an admin. See Invoices overview.

  • The invoice still mentions the old late fee. The line "Pay by MM/DD/YYYY to avoid a $X late fee." is written from the late fee itself and changes as soon as you change the fee. Wording you typed in the Charge description or Charge message doesn't change by itself. Edit it on the recurring template for future invoices. For invoices that already exist, tick them, click Actions → Edit, type the new Charge description or Charge message and leave the other fields blank. See Edit invoices.

Change the day a late fee applies

To change the day a late fee applies, for example to charge it on the 12th of each month instead of the 5th, change the late fee's timing in the same three places as its amount. A late fee's day is never typed as a day of the month on a recurring template: it's the invoice's due date plus a number of days.

  1. Future invoices: change the recurring template. Click Invoices → Recurring templates → ⋯ on the template → Edit. Under Late fee 1, change Days after the due date, then click Update charge. Count from the due date: dues due on the 1st with 11 days get the late fee on the 12th. The sentence under the fee shows the date it works out to. Only invoices created after you save use the new day.

  2. Invoices that already exist and haven't had the fee yet. For one invoice, click ⋯ → Edit, change Days after the due date and click Update charge. For many, tick them, click Actions → Edit → Add late fee, enter the fee again and pick the date in Applies on (or First applies on for a fee that repeats), then click Save charges. This bulk form takes a calendar date, which must be after the due date of every ticked invoice, and the fee you enter replaces the late fees already set on those invoices.

  3. Late fees already added keep their date. A late fee that's on the account is its own Late Fee invoice and its date can't be moved. If it was added too early and the board doesn't want it charged, delete it. See Remove late fees.

  • The late-fee day follows the due date. If you change the template's Next due date (or an invoice's due date), the late fee moves with it, because it's counted in days from the due date. To move the due date and keep the late fee on the same calendar day, change Days after the due date as well.

  • How often a repeating fee comes back is set by Repeats every and Unit, not by Days after the due date, which only sets the first one.

  • There's no association-wide late-fee day. Each template and each invoice has its own. See Where is the late fee setting? at the top of this article.

When a late fee looks wrong

Two late fees in one month, or fees keep doubling. Look for an older unpaid invoice with an Until paid fee: every month it adds another fee to that invoice, so an owner who pays the current dues but never the old balance sees "double" fees. Also check whether a fee is set both on the recurring template and separately on the invoice, or whether two fee rules are stacked (a flat fee plus a percentage both show as late fees). Open ⋯ → Charge details → Discounts and fees on the original invoice to see every rule, and Late fees applied to see what's been added.

A unit's balance is too high, or its late fees look doubled, after an invoice was deleted or forgiven. Deleting or forgiving an invoice doesn't remove the late fees that were already added to it. Each one is its own invoice, so it stays open on the unit and still counts in the balance. To find these leftover late fees, open the unit from Units and look at its Current invoices tab, or type Late Fee in the search box above the list. A leftover fee is listed without its invoice, as its own row titled Late Fee (or as a Late Fees group with no invoice above it), and its description names the invoice it was charged on, such as $25.00 late fee for charge "Dues" due on 01/01/2026. If that invoice is gone and the fee shouldn't be owed, click ⋯ → Delete charge on the late fee (or tick several and click Actions → Delete). You can do this yourself; it doesn't need PayHOA support. To check whether other units are affected, go to the Invoices page, click Filters, set Charge to Late Fee, tick Overdue under Invoice status and click Apply filters. The list shows every unpaid late fee with its unit, and each description names the invoice the fee was charged on. A late fee whose invoice is on the Deleted invoices tab is a leftover. If the balance is still wrong after the leftover fees are gone, contact PayHOA support with the unit, the balance you expect and the invoices you think are wrong.

A back-dated invoice got months of late fees at once. A late fee is dated from the invoice's due date, not from the day you create the invoice. If you create an invoice whose due date is already in the past and give it a late fee, every fee whose date has already passed is added as soon as the invoice is created: one fee for a fee charged Once, and one for every interval missed since the first date for a fee charged Until paid. Account credit on the unit is applied to the new invoice first, but it only prevents the fees if it pays the invoice in full; if any balance is left, all the missed fees are added. To avoid this, leave Late fees off when you back-date an invoice. If it should get late fees from now on, add the fee afterwards with a date in the future: enter enough Days after the due date to land on a future date, or tick two or more invoices and use Actions → Edit → Add late fee with a future Applies on date. To remove fees that were already added this way, delete the late-fee invoices and use Remove late fees on the original so no more are added. See Remove late fees.

A late fee was charged although the owner paid on time. Check which invoice the payment paid: open the unit's All payments tab. A payment you record, an autopay payment and account credit all go to the invoice with the oldest due date first, so a payment meant for this month's dues can pay an older special assessment, fine or late fee instead, and the dues invoice stays open and gets the fee. Fix both parts. Move the payment: for a check or cash payment you recorded, delete it and record it again, choosing the dues invoice (see A payment went to the wrong invoice or unit); for a card or bank payment the owner made online, contact PayHOA support with the unit, the payment date and amount, and the invoice it should pay. Then delete the late-fee invoice as described under Remove late fees.

A fee was charged although the owner had a credit. Account credit pays an invoice only once the invoice is active, and it goes to the oldest due invoice first. A credit that arrived after the fee date, or that was used on another invoice, won't prevent the fee. If the board waives it, delete the late-fee invoice. If every unit got the same unexpected fee on the same day, contact PayHOA support with the date of the fee, the title of the invoice it was added to, and one or two of the units.

The fee never applied. Fees are added within half an hour of the fee date. If none appeared, check:

  • The fee is set to Once and was already added earlier.

  • The Fee amount or Fee rate is 0.

  • The invoice's balance was zero that day (for example a payment that was later returned).

  • The "fee" you expect is on a late-fee invoice. Late-fee invoices never get late fees of their own; only the original invoice does.

The late fee was dated months ago, not today. A late fee is dated by its rule, not by the day you set it up. In the Edit charge form the rule is Days after the due date, so on an invoice that was due months ago a small number of days gives a date months ago, and the fee is added with that date at the next run. To date a fee today, enter the number of days from the due date to today; the sentence under the fee shows the date. A late fee that has already been added keeps its date. See I want the late fee dated today on an old invoice under Good to know.

The form asks for "Days after the due date" and I wanted to pick a date. Both exist. The Add charge and Edit charge forms, for one invoice or a recurring template, ask for Days after the due date. The bulk edit (two or more invoices ticked → Actions → Edit → Add late fee) asks for a date: Applies on, or First applies on for a repeating fee.

I deleted the recurring template and late fees keep appearing, or a late fee comes back every month. See Stop a late fee that keeps coming back.

It applied a day later than I expected. Days after the due date counts full days. Due on the 1st with 20 days means the fee is dated the 21st and added shortly after midnight that day. The sentence under the fee in the charge form shows the exact date.

An owner on autopay was charged a late fee. Autopay pays only up to the owner's monthly limit. If that month's invoices (dues plus a special assessment, a late fee or two invoices in one month) went over it, part of the balance stayed open past the due date and the fee applied. Check the unit's All payments tab for a partial autopay payment. A returned payment or a card that failed also leaves the balance open. Ask the owner to raise the limit or pay the rest, then delete the late-fee invoice if the board waives it. On a recurring template, a fee set to 0 days after the due date is added just after midnight on the due date, which can be before autopay has paid it that morning; use at least 1 day. See Invoices: common questions.

Autopay owners got the "late fee will apply in N days" email. Payment reminders go to autopay owners while Send Reminders to Members with Autopay is on in Settings → Preferences. Turn it off if your owners find them alarming. See How invoices are sent.

Late fee settings

In Settings → Preferences:

  • Send New Late Fee Charge Emails — email owners when a late fee is added.

  • Require Late Fees To Be Paid With Or Before Their Originating Invoice — under Payment Preferences. When on, owners paying online must pay an invoice's late fees with it ("... has a late fee that must be paid in full first"), and account credit and lockbox payments pay fees first. A payment you record on the Record payment form also pays each late fee just before the invoice it was charged on, unless you choose the invoices yourself. It doesn't change how autopay or payments imported from a file are applied. See Record a payment and how payments apply.

Did this answer your question?