Skip to main content

Enroll and set up HomeWise Docs

Enrolling connects your association with HomeWiseDocs, so title companies, lenders and agents can order resale documents for your homes.

M
Written by Michael Bollinger

Enrolling connects your association with HomeWiseDocs, so title companies, lenders and agents can order resale documents for your homes. You accept the terms, then fill in a short setup page with the details that go on official resale documents. It takes a few minutes if you have your EIN, your insurance broker's contact details and your payment address to hand.

Before you start: you need Write access to Resale Documents (admins have it). Your association also needs its units in PayHOA. HomeWise can't take orders for a community with no units. See Add a unit or Import units and owners.

Accept the terms

  1. Open Resale Documents and click Enroll now.

  2. Read Terms and authorization. The Resale document management agreement explains what you agree to.

  3. Tick I have read and agree to the terms above.

  4. Click Accept and continue.

Your association is enrolled as soon as you click Accept and continue. The setup page opens next. If you click Accept and continue without ticking the box, you see "Check the box to accept the terms."

If you only have Read access, you see "An admin of this association needs to accept these terms before setup can start." Ask an admin, or a board member with Write access, to accept.

What you agree to

The agreement says that when you click Accept and continue, you:

  • Agree to the HomeWiseDocs Terms of Use and Service Agreement.

  • Authorize PayHOA to share necessary community and property data with HomeWiseDocs to process resale document requests on your behalf.

You give PayHOA permission to:

  • Access and retrieve documents from your HOA's Documents section to fulfill resale requests.

  • Manage the full resale document process on behalf of your HOA.

  • Communicate with title companies, realtors, and lenders regarding requests.

  • Provide required financial documents and HOA information.

  • Maintain a secure record of all resale document transactions.

And you acknowledge that:

  • All provided documents must be current and accurate.

  • You'll notify PayHOA of any material changes to HOA governing documents.

  • PayHOA staff will have administrative access needed to fulfill requests.

Important: PayHOA prepares resale documents for your association from what's in PayHOA. Keep your balances, violations, documents and setup details current, because they end up in documents a buyer relies on.

Fill in the setup page

The page is headed Set up HomeWise Docs. Details are on the left; your documents are in the Documents (optional) panel on the right.

There's no Save button. Each card saves on its own when you click out of a field. The badge on Setup progress shows Saving, Saved or Not saved.

Association details

This appears on official resale documents.

  • Employer Identification Number (EIN): your association's 9-digit federal tax ID, for example 12-3456789.

  • Association type: Condominium or Planned community (PUD). This decides which documents HomeWise includes in resale packets. If you're not sure, check your declaration or CC&Rs.

Insurance broker

Who buyers' lenders should contact about the association's insurance.

Fill in Broker or agent name, Phone and Email for the agent or agency that handles the association's master policy.

Tip: these details go into resale packets and to lenders. Use the broker's business contact details, not a board member's personal phone or email.

If a required detail doesn't apply to your association

The required details are the EIN, the association type, the three insurance broker fields and the payment address. None of them has a "not applicable" choice, and each one must be filled in before Complete setup works and before any order can be submitted for review. Typing N/A or NA only works in a free-text field:

Field

What it accepts

Broker or agent name

Any text, so N/A is accepted

Phone

A 10-digit phone number only. NA gives "Enter a 10 digit phone number."

Email

A valid email address only. NA gives "Enter a valid email address."

Employer Identification Number (EIN)

A real 9-digit EIN only

Payment address

Any text in Address line 1 and City; a 5 or 9 digit ZIP code

If your association has no insurance broker, for example it buys its policy straight from an insurer or has no master policy, the card still needs a name, a phone number and an email. It asks who buyers' lenders should contact about the association's insurance, so enter the contact who can answer that: the insurer's agent or service line, or the person in your association who handles insurance questions. Then tell the resale team what you entered and why, with Email Macy on the dashboard or a comment on the order, so the packet doesn't send lenders to the wrong place.

Documents are different: a document your association doesn't have can be marked not available. See When the association doesn't have one.

Fees

Transfer fees or dues to collect from new owners at closing, and any special assessment.

Transfer fees (optional). Add any transfer fee, capital contribution or dues your association collects from a buyer at closing. Leave it empty if you don't charge one.

  1. Click Add fee.

  2. Under Type, pick Flat amount for a fixed figure, or Custom for a fee worked out another way, such as two months of regular assessments.

  3. Enter a Fee name, such as Transfer fee.

  4. Enter the Amount, or for a custom fee, the Fee description.

To delete a fee, click its trash icon. Check what your governing documents and state law allow before you add a fee. See Fees: what the buyer pays and what your association collects.

Special assessment. Pick one:

  • No special assessments in place or planned in the next 24 months

  • A special assessment is in place or planned. Then fill in Assessment details: what it's for, the amount, and when it's due.

New orders start with this answer. You confirm it again on each order.

Payment address

Where fees collected at closing should be sent.

Fill in Address line 1, Address line 2 (optional), City, State and ZIP code. Use the address where your association receives checks. Fees collected at closing aren't mailed to you by the title company: the check arrives at PayHOA's office first, and PayHOA mails a check on to your association. See Where the check for resale fees is sent.

Documents (optional)

You don't need any documents to finish setup. HomeWise only needs them when an order comes in, and then each order needs its own set before you can submit it. Adding them now saves time on every sale. See Add and keep your resale documents current.

Check what's left

The Setup progress card shows {done} of {total} done for the required details: EIN, association type, the three broker fields, the payment address, and your units.

Open What's left ({n}) to see each gap:

  • A missing field shows Fill it in under {section} and Go to it.

  • Missing units show Add your units so HomeWise can take orders.

  • A missing document shows Optional. HomeWise only needs it when an order comes in. and Add it.

  • A document that looks wrong shows Check it. See Add and keep your resale documents current.

When every required detail is in, the heading reads Everything is in, or What's left lists only optional documents, and you see "Everything is in. Click Complete setup to finish."

Complete setup

Click Complete setup at the top of the page. The button stays greyed out while a required detail, or your units, is missing. PayHOA checks the required details again when you click.

  • If everything's there, you see "Setup complete" / "Thanks. HomeWise Docs has what it needs." and go to your dashboard.

  • If not, the Setup progress card shows "Finish these before you complete setup: …" with the missing items, or you see "Fix the highlighted fields first." Fix them and click Complete setup again.

Your details are saved as you go, so clicking Complete setup doesn't save anything extra. It confirms nothing is missing.

Let Gable fill in setup

Gable can read your Documents and suggest answers for the setup fields and a file for each document slot.

  1. In the Documents (optional) panel, click Scan with Gable. It changes to Gable is reading while it works, and you see "Gable is reading your documents. This page updates on its own."

  2. When it's done, you see "Gable is done" and a summary of what it found.

  3. Under a field, Gable shows Gable found {value} in {file}, a short quote, and a badge: High confidence, Check this or Low confidence.

  4. Click Use this to fill the field, or Dismiss.

To take every high-confidence suggestion at once, fields and documents, click Accept all high confidence ({n}). Check anything marked Check this or Low confidence yourself before you use it.

If you click Use this on the EIN yourself, nothing more happens. If the PayHOA resale team fills in your EIN from your documents for you, they may email your admins Please confirm your association's EIN. Check it under Association details and reply if it's wrong.

If the scan fails, you see "Gable couldn't finish reading your documents. Try the scan again." Click Scan again with Gable.

If setup is on hold

If your EIN or units are missing, the dashboard shows a warning such as "Your Resale Documents setup is on hold. Add your association's EIN (Employer Identification Number) so we can finish setting up your account." Click Add your EIN to open the setup page, or Add your units to add units.

While setup details are missing, the Resale orders tab also shows "{x}% complete. Finish setup before submitting orders for review." Click Complete your enrollment details to finish.

How long until HomeWise lists you

Once every required detail and your units are in, the PayHOA resale team sends your association to HomeWise. What goes to HomeWise at this point is your association's name, EIN, type, city, state and ZIP, the number of units, and a list of your units with their addresses. No owner names, balances or documents are sent at this step.

Your association isn't sent while a required detail or your units are missing, so finish setup first. After that it usually takes a few days before title companies can find your association on HomeWiseDocs. If a requester tells you they can't find it, see Resale documents: common questions.

"Setup complete" is the last status PayHOA shows you. Your Resale Documents page has no Reviewed, Live or Listed status to wait for, and it doesn't change when HomeWise lists your association. To check that you're listed and ready for orders, go to homewisedocs.com and click Log In or Sign Up: its home page has no search for visitors, and reads Log In or Sign Up to place an order. Once you're signed in, start an order the way a title company would and look for your association there. If you can't find it after a few days, or you'd rather not open a HomeWiseDocs account, click Email Macy.

Change your details later

Click Details on the Resale documents dashboard. The same setup page opens. Change any field; it saves when you click out of it.

Troubleshooting

You see

What to do

"Check the box to accept the terms."

Tick I have read and agree to the terms above., then click Accept and continue.

"An admin of this association needs to accept these terms before setup can start."

You have Read access. Ask an admin or a board member with Write access to accept.

"Enter all 9 digits of the EIN." / "Enter a real EIN." / "An EIN can't start with {prefix}."

Check the EIN on your IRS letter or tax return.

"Enter a 10 digit phone number."

Enter the broker's phone with area code. NA isn't accepted here. See If a required detail doesn't apply to your association.

"Enter a valid email address."

Check the broker's email. NA isn't accepted here.

Setup asks for an insurance broker, but we don't have one

The three broker fields are required and have no not-applicable choice. Enter whoever lenders should contact about the association's insurance, and tell the resale team. See If a required detail doesn't apply to your association.

"Enter an amount of at least $0.01."

Enter a fee amount, or delete the fee row.

"Enter a 5 or 9 digit ZIP code."

Check the payment address ZIP code.

"Fee amount is too large. Please contact support if you need to set fees above $9,999,999.99."

Check the amount. Contact PayHOA support if it's correct.

"Finish these before you complete setup: …"

Fill in each item listed, then click Complete setup again.

Complete setup is greyed out

A required detail or your units are missing. Open What's left to see which.

"Add your units so HomeWise can take orders for your community."

Add your units. See Add a unit.

"Please complete enrollment before accessing your dashboard."

Click Enroll now and accept the terms first.

"We couldn't load setup"

Click Try again. If it keeps happening, contact PayHOA support.

What's next

Did this answer your question?