Set up the letter for each kind of violation at each stage once, and PayHOA fills it in for you every time a violation reaches that stage. For example, Trash cans at Courtesy Warning gets a friendly reminder, and Trash cans at Second Warning gets a firmer one.
How letters work
Templates are the pieces. Every letter has a header, a body and a footer. The header and footer are usually your letterhead and sign-off, shared by many letters. The body says what the violation is and what to do about it. See Create violation templates.
A letter is one type at one status. A letter puts one header, body and footer together for one violation type at one status, like Trash cans at Courtesy Notice.
Change the status, and the letter is ready. When a violation moves to a new status, its letter is already filled in. You can still change anything before it goes out. See Change a violation's status.
Gable fills in its guesses. Empty letters get Gable's best guess, marked Guess, until you confirm or change them.
Fields fill in by themselves. Fields like (first name) or (unit address) become the owner's real details when the letter is sent.
Edit once, and every letter updates. Change a template and every letter that uses it changes too.
Click How it works on the Letters tab for a quick refresher.
Open your letters
Click Violations in the left menu, then Settings. The Letters tab opens first (the others are Statuses, Types, Notifications and Approvers). Switch views at the top right:
Letters — pick one letter to work on.
Grid — every violation type and status at a glance.
Templates — the headers, bodies and footers letters are built from.
See every letter in the grid
Grid shows "Every letter at a glance": violation types down the side, statuses across the top, and how many are filled in (for example 0 of 180 filled).
Each cell is a letter that's set, a Guess, or Add. Click a cell to open its letter. The pencil next to a type's name (Edit the Parking type) jumps to the Types tab, where you can rename it.
Gable's guesses
Gable reads your templates and the letters you've sent before, and fills empty cells with its best guess, marked Guess. Guesses aren't used until you confirm them. A row that reads "Not a type yet. Confirm a guess to add it." is wording Gable found in your past letters; confirming its guess adds the violation type.
Click a guess to check it.
Change the header, body or footer if needed. The Preview shows the result; turn on Show fields to see where fields fill in.
Click Confirm letter. Or click Undo changes to start over.
To accept all of them at once, click Confirm all in the banner above the grid.
Add a letter
On the Letters view, click New letter.
Pick the Violation type and the Status.
Click Create letter. The letter is saved with a starter body you can edit right away.
Edit or remove a letter
On the Letters view, choose it from Pick a letter. Pick a different Header, Body or Footer, or edit the text. Changes save as you go.
Full editor opens the body in a bigger editing page.
Remove stops the letter from filling in by itself. Its templates are kept.
Important: If a body is used by more than one letter, editing its text changes all of them. The letter tells you when its body is shared.
Letters also save themselves
When you change a violation's status, Use this letter every time is ticked for you. Leave it ticked, and the letter you sent becomes the letter for that type and status. See Change a violation's status.
Have someone approve letters before they go out
Optional. You can make a violation type's letters wait for an approver, such as a board member or the committee chair, before they're emailed to the owner. A type with no approvers sends its letters straight away.
Choose the approvers
Click Violations in the left menu, then Settings, then the Approvers tab.
Under the violation type, pick a person in Add an approver. Anyone in your association can be an approver, administrator or not; each name shows Admin or Member and their email. Pick people who have an email address, because approvers are asked by email.
Add more approvers if you need them. To take someone off, click the trash can (Remove) next to their name.
Changes save as you make them ("Approvers for Parking updated."). The line under each type reads "Letters for this type wait for an approver." or "No approvers. Letters send right away." Retired types aren't listed.
What waits and what doesn't
Waits for approval: every email that carries the letter of a violation of that type. That's the notice sent when you issue it, Actions → Notify, Actions → Email Violations, Email the owners on the Edit Violation page, and status-change emails, for one violation or several. Letters Gable sends wait too.
Doesn't wait: paper letters sent with Mail or Mail Violations, completion and re-open emails, comment emails and fine invoices.
The violation is saved, and its status changes, right away. Owners can see it in their portal while the email waits.
A violation that isn't tied to a type, such as one written with Or, enter it manually, isn't held.
When you issue a violation or change a status, you'll see "The letter went to the approvers for this violation type. It goes to the owner once one approves." Notify and Email Violations still say "Sent 3 violation emails." even when the letter is waiting, so check Approvals if you're not sure.
What approvers do
Each approver gets an email titled A violation letter needs your approval (or 3 violation letters need your approval) with an Approve and a Deny button for each letter. The buttons work for 14 days. Approvers can also open the Approvals page (the email's See everything waiting on you link, or Approvals · N on the Violations page), read each letter and click Approve or Deny. When more than one letter is waiting, Approve all sends them all at once.
The first decision counts:
Approved — the letter is emailed to the owner right away, with the violation's wording at that moment.
Denied — nothing goes to the owner. The approver can add a Note for staff. The person who sent the letter gets an email titled A violation letter was denied with the note.
Track letters that are waiting
On the Violations page, click Approvals · N. The button only shows when a letter is waiting or was denied. The Sent for approval card lists each letter as Waiting (Waiting on and the approvers' names) or Denied (Denied by the approver, with their note). Click a row to open the violation. When nothing is held, the card reads "Nothing waiting".
A denied letter stays in the list until that violation's letter is sent again. To send it again, fix the violation and send it as usual. The new letter goes to the approvers and replaces the earlier one in the list.
Starting from scratch
If your association has no letters, statuses or templates yet, the Letters tab shows "No letters yet" with a Use the starter set button. The same button appears on the What did you see? step of a new violation. It adds:
Three statuses: Courtesy notice, Second notice and Fine notice.
Common violation types: Lawn not mowed, Weeds in beds, Trash cans in view, Parking, Exterior paint and Pets.
A header with your association's name, a "Sincerely, The Board of Directors" footer, and a letter for each type and status.
Change any of it to match your rules. The button disappears once you have any letter, status or template.
Where violation types come from
Violation types are created when you start a violation with Fill it in, upload a letter you already send, or use the starter set. See Create a violation. To manage them, see the next section.
Rename, retire or delete a violation type
Click Violations in the left menu, then Settings, then the Types tab. It lists every type with its number of Violations and a Status of Active or Retired. Use Search types to find one. The banner explains the rules: "Every violation has a type. Rename a type here. Delete a type no violation uses, or retire one that has history: its violations keep it, and it leaves the pickers for new violations and letters."
Click ⋯ on a type and choose:
Action | What it does |
Rename | Opens Rename violation type. Enter the new Name and click Save. "Violations of this type and its letters keep working under the new name." |
Retire | Only for types that violations use. Confirm with Retire. The violations keep the type in their history, but it no longer shows when you issue a new violation or add a letter. |
Restore | Brings a retired type back into the pickers. |
Delete | Only for types no violation uses. Confirm with Delete. "No violation uses this type. Its letters are removed too." If violations use the type, Delete is greyed out with "Violations use it. Retire it instead." |
Tip: Gable creates a type each time you use Fill it in with a new description. If it saved a type with the wrong name, rename it here rather than creating another.





