Once you send a ballot, its status is Voting in progress and owners can vote until the end date. This article covers what you can do in that time: follow the responses, remind and resend, add units, move the end date, and end voting early.
Before you start: you need Voting write permission. With read access you can view the ballot but not change it. See Give board members and staff access.
Open the ballot from Votes: click the Voting in progress tab, then the ballot's row. Everything below is on the ballot's page or in its Actions menu.
Follow the responses
The cards at the top give the totals.
Card | What it shows |
Recipients | The number of units on the ballot, and {n} ballots sent |
Responded | {x} of {n} units that have voted, and the response rate |
Quorum | Off, or Reached / Not reached with {n} voted, {m} needed |
Voting closes | The end date and time |
Responses and quorum count units, not people. Quorum is worked out from the ballots sent, not from every unit you picked.
If ballots sent is lower than the number of units, some units weren't emailed the ballot: they have no current owner, or none of their owners has an email address on file. Those units aren't in the Responded total or the quorum base.
The Responses card lists every vote as it comes in:
Respondent: the owner's name and unit address.
Voting method: Online, or Offline for votes you recorded yourself.
Response date.
Its subheading splits the count, for example 12 online · 3 paper or offline. Click a row, or ⋯ → View response, to see that owner's answers.
The Recipients card lists every owner on the ballot under Voters. Use Search owners, units or addresses to find one. There's no list of owners who haven't voted. To find them, compare Voters with Responses, or let reminders and Resend online ballots do it: both skip units that have already voted.
On an anonymous ballot, names show as Anonymous and the Voters list isn't shown. See Anonymous ballots: who can see what.
Remind owners who haven't voted
Reminders are set in the ballot's Voting settings before you send it, with Send friendly reminders:
Repeating, after the ballot is sent: every N days (14 by default), counting from when voting opened.
Once, before voting closes: one reminder N days before the end date.
Reminders go out once a day when they're due. They go only to owners who were sent the ballot, haven't voted, and whose unit hasn't voted. The subject is Reminder: Please Cast Your Vote - HOA Ballot.
The ballot's Voting settings card shows what you chose under Reminders. Once voting is in progress you can't turn reminders on or change them (Voting is in progress, so only the end date can change.).
There's no "send a reminder now" button. To nudge owners now, resend the ballot (next section), or ask Gable in the AI Assistant panel to send a reminder to owners who haven't voted. See Gable in each module.
Resend the ballot
Resend online ballots emails the voting link again. It goes only to owners who haven't voted, whose unit hasn't voted, and who have an email address on file.
Click Actions → Resend online ballots.
Under Select units to resend online ballots, every unit on the ballot is ticked. Untick the ones you don't want.
Edit the Email body text if you like. The greeting, vote button, and signature are added automatically.
Click Send to myself to check the email first, or Send to homeowners to send it.
You'll see Ballot invitations resent. The subject is Reminder: Please Cast Your Vote - HOA Ballot and the button reads Click here to vote. The resend doesn't use the wording you saved for this ballot's invitation; it uses the Email body text in this dialog. An owner on the ballot who was never sent the invitation gets the invitation instead.
Each resend gives the owner a new sign-in link. That helps an owner whose first link says This link has already been used.
Send to myself only works if you own a unit on the ballot. Otherwise you'll see You are not an owner of a unit on this ballot, so a copy cannot be sent to you. If it works, you'll see Ballot invitation sent to you and the dialog closes.
Add units
You can add units while voting is open. You can't remove them.
On the Recipients card, click Add recipients.
Pick the units. Units already on the ballot show Already on this ballot.
Click Add {n} and send invites.
The owners of the new units get the invitation by email right away (Invites are on their way to the new owners.). Only owners with an email address are added. An owner of a new unit with no email isn't put on the ballot at all, so add their email first.
New units get online invites only, even on a ballot with mailed letters. See Mailed ballots (QR letters) and offline votes.
Extend voting or move the end date
Click Actions → Change end date, or Change end date on the Voting settings card.
Pick the End date and End time.
Click Save end date.
You'll see The end date is updated. You can make the ballot longer or shorter. The date must be today or later.
Changing the date doesn't email owners. Tell them with a Broadcast (see Send an email to owners), or use Resend online ballots so owners who haven't voted get a fresh link.
The sign-in link in each email is set when the email is sent. It lasts 30 days, or until the end date at that time if that's later (up to 90 days), and it works once. If you extend voting past that, owners with an old email may see This link has expired. Please log in to continue to your targeted page. They can sign in and open Votes, or you can resend.
You can change the end date only while voting is in progress. Once a ballot has ended on its own, its dates are final.
End voting early
Click Actions → End voting early.
Read Voting ends now for everyone who has not voted yet. This cannot be undone.
Click End voting, or Keep voting to cancel.
The ballot moves to Voting ended straight away, and the results are final unless you reopen it.
Reopen a ballot you ended early
The dialog says it can't be undone, but there's one way back. Actions → Reopen voting appears when all of these are true:
you ended voting early;
the original end date hasn't passed yet;
at least one owner hasn't voted.
Click Reopen voting, then confirm. Owners who have not voted yet can vote again until the end date. A ballot that ended on its end date can't be reopened. To vote again, duplicate it (see Fix a mistake: edit, duplicate, delete or change a vote).
When the end date passes
The status changes to Voting ended within about 5 minutes of the end time. Owners can no longer vote, and the end date and recipients are final. See Results, export and sharing results for what to do next.
An owner says they didn't get the ballot
Work through these in order.
Is their unit on the ballot? On the Recipients card, search Voters for their name or address. If the unit is missing, add it (see Add units).
Did they become an owner after the ballot was sent? A new owner who bought the unit, or was added to it, while voting was open isn't on the ballot, so they got no ballot email and the ballot isn't on their Votes page. Resending doesn't reach them either: the unit's vote stays with the owners who were on the unit when the ballot was sent, and a resend to that unit goes to those owners or is refused. See The unit changed owners after the ballot was sent.
Has someone on their unit already voted? Only one vote counts per unit, and resends skip units that have voted. See Weighted voting, co-owners and owners with several units.
Is their email address right? The invitation goes to every email address on the owner's profile. Check it, and check that emails to them aren't bouncing. See Why an owner isn't getting your emails.
Ask them to check spam or junk.
Resend it to their unit with Resend online ballots.
Owners can also vote without the email. They sign in to PayHOA, open Votes, and click View & vote on the Open ballots tab.
Administrators don't have Votes in their menu. An administrator who owns a unit on the ballot votes from the button in the email. To get that email again, they can open the ballot, click Actions → Resend online ballots, then Send to myself.
The unit changed owners after the ballot was sent
A unit that's sold, or gets a new owner, during an open ballot or election keeps the voters it had when the ballot was sent. The new owner isn't added to the ballot, gets no ballot email, and doesn't see the ballot on their Votes page. This isn't an email problem, so checking their address or spam won't help.
Resend online ballots doesn't fix it. A resend to that unit goes to the owners who were on the ballot, if they still have a login and an email address. If they don't, the resend is refused with None of the selected members can be sent this ballot again — they have already voted or have no valid email address on file. You can't record an offline vote for the new owner either, and a unit can't be removed from the ballot and added again.
What you can do: agree with your board whose vote counts for that unit under your governing documents, or duplicate the ballot and send the copy (see Fix a ballot that's already out: duplicate it). The rule is explained under Co-owners.
If a resend fails with a different error, such as There was a problem resending the ballot invitations, or the new owner was already an owner of the unit before you sent the ballot and still isn't under Voters, contact PayHOA support with the ballot's name, the unit, the owner's name, the date they were added to the unit and a screenshot of the message.
An owner says they voted, but they aren't in Responses
Use this when an owner saw Vote submitted but isn't listed under Responses, when votes aren't showing up in the results or the tally, or when the Responded count has stopped going up while owners say they're voting. Check these first:
Reload the ballot's page. The cards and the Responses list show what was there when the page loaded.
Did a co-owner vote first? A unit has one vote. The unit's row in Responses carries the name of the owner who voted first, and a later vote from another owner of the same unit isn't counted. On a ballot with Allow vote changes, that second owner can even see Vote submitted and nothing changes. See Co-owners.
Is the ballot anonymous? Every row in Responses reads Anonymous, so you can't find an owner by name. Use the Responded count instead. See Anonymous ballots: who can see what.
Did they vote on this ballot? If you duplicated a ballot or have two open, the owner may have voted on the other one. Votes don't carry from one ballot to another.
Is the owner under Voters? On the Recipients card, search Voters. An owner who isn't on the ballot can't cast a vote on it.
If none of these explains it (the owner is under Voters, no co-owner voted for the unit, and after a reload their unit still isn't in Responses or the Responded count hasn't moved), the vote wasn't recorded and you can't fix that yourself. Contact PayHOA support with the ballot's name, the owner's name and unit, the date and time they voted, and a screenshot of what they saw. Give two or three examples if several owners are affected.
While you wait:
Don't duplicate the ballot and send it again. A duplicate is a new ballot with no responses, so everyone who has already voted would have to vote again.
Record the affected owners' choices yourself if they give them to you another way, with Actions → Record offline votes. It works while the ballot says Voting in progress. See Record an offline vote.
If time is short, move the end date. See Extend voting or move the end date.
Troubleshooting
You see | What it means |
None of the selected members can be sent this ballot again — they have already voted or have no valid email address on file. | Every owner on the units you picked has voted or has no email address. Check the owner's email, or record their vote yourself (see Mailed ballots (QR letters) and offline votes). |
A new owner got no ballot email, and resending to their unit fails or reaches the previous owner | They became an owner after the ballot was sent, so they aren't on it. See The unit changed owners after the ballot was sent. |
There was a problem resending the ballot invitations | The resend didn't go through. Reload the page and try again. If it keeps happening, contact support with the ballot's name, the units you picked and a screenshot of the message. |
An owner saw Vote submitted but isn't in Responses, or the Responded count has stopped rising | |
The end date must be today or later. | Pick today or a later date. |
The units could not be added. Try again. | Reload the page and try again. If it keeps happening, contact support with the ballot's name and the units. |
There was a problem ending the vote. | Reload the page. If the status still says Voting in progress, try again. |
Change end date isn't in Actions | The ballot isn't Voting in progress, or you have read-only access. |
Reopen voting isn't in Actions | The ballot ended on its end date, the end date has passed, or everyone has voted. |


