Skip to main content

Create and share a survey

A survey is an informal poll: ask owners what they think about a project, an event or a rule change.

M
Written by Michael Bollinger

A survey is an informal poll: ask owners what they think about a project, an event or a rule change. Each person who's invited answers once, and the results are for the board, not a formal vote. Create the survey, add your questions, then share it with the units or owners who should answer.

Before you start: you need Write on Surveys (see Give board members and staff access). Surveys must be turned on for your association: click the gear icon at the top right, then Preferences, and under Module Preferences turn on Enable Surveys (see Preferences). With it off, Surveys leaves Other Tools and owners' menus. To change the invitation email you also need Write on Broadcast.

Survey or ballot?

Pick a survey only when the answers aren't binding.

Survey

Ballot

Who answers

Each invited person, so two co-owners of one unit can both answer

One vote per unit

Quorum and weighting

No

Yes

End date and automatic reminders

No. You close it by hand, and remind people yourself

Yes

Owners see results

Never

If you choose to share them

Mailed letters

No

Yes

If you need one answer per household, a quorum, weighted votes or a record for an election or amendment, create a ballot instead. See Votes and surveys overview and Create a ballot: title, questions and preview.

Create the survey

  1. Open Other Tools → Surveys and click New survey. You can also click New on the Votes page.

  2. In Ballot or survey?, click the Survey tile. From the Surveys page you can also click Continue with survey; from Votes that button reads Continue with ballot, so click the tile.

  3. On Create survey, enter a Survey title and a Survey description. Both are required, and Create survey stays greyed out until they're filled in. Owners see the description above the questions.

  4. Under "Do you want the responses for this survey to be anonymous?", choose Yes or No. Yes is selected for you. See Anonymous or not.

  5. Add your questions (next section).

  6. Click Create survey.

Nothing is saved until you click Create survey. If you click Cancel, no draft is left behind.

Add questions

Each question has a Question type and Question text.

Question type

What owners do

Multiple choice (text)

Pick one answer from your Choices. Click Add another choice for more.

Essay

Type a written answer. Results call this Long answer.

Multiple choice (images)

Pick one image. Click Add image choice to upload each image; it's cropped to a square. Images are lettered A, B, C.

Click Add question for the next one. To remove a question, click its trash icon. The icon shows once the survey has more than one question.

Give every multiple-choice question at least two choices before you save. PayHOA doesn't stop you saving a question with no choices, but owners can't answer it, and then they can't submit the survey.

Every question is required. There's no way to make a question optional. If some owners won't have an answer, add a choice such as "No opinion", or use a conditional question.

Ask a question only after a certain answer

To have owners skip a question, or skip to another question, depending on an earlier answer ("skip logic"), make the question conditional: it's shown only to people who picked a certain answer, and everyone else skips it without having to answer it. A survey can't jump to a numbered question; you put the condition on each question that some people should skip.

From question 2 on, turn on Show only when, then pick the earlier Question and the Answer that should show it. For example, show "What would you like to see at the pool?" only to people who answered Yes to "Do you use the pool?".

  • The earlier question must be a multiple-choice question (text or images).

  • Owners only see the conditional question after they pick that answer. If they change their answer, the conditional question and its answer go away.

  • If you see "Pick the question and answer for each "Show only when", or switch it off.", finish both selects or turn the switch off.

Anonymous or not

Setting

What owners see before they answer

What you see

Yes (anonymous)

"Your responses are anonymous. Admins see your answers but not your name."

Totals and written answers, with Anonymous in place of names. The respondents list shows who was invited, not who answered.

No

"Your responses are not anonymous. Admins can see your name with your answers."

Each answer with the person's name, and the date each person responded.

You can change this until the first person answers: open the survey, pick Yes or No, and click Update survey. After the first response, the choice is no longer shown and the survey stays as it is.

Share the survey

After you create a survey, the Share survey dialog opens. You can also share later from the survey's ⋯ menu or its Actions menu → Share.

Owners aren't notified automatically when a survey is created. A survey sends an email only when you share it, and only to the units and owners you pick. Unlike a ballot, it has no automatic invitations or reminders.

  1. Pick the units and owners who should take the survey. A unit covers all of its owners, so every owner on that unit is invited. To share the survey with everyone, tick the box in the header row of the list; it selects every unit in the list.

  2. Optional: click Preview & edit email to change the invitation's subject or wording. Then click Send this once to use your wording for this share only, or Save for future emails and send to make it your association's survey invitation from now on.

  3. Otherwise, click Share with N owners.

You'll see "Survey shared with {n} of {requested} member(s)."

Owners need an email address on file to get the invitation. A person with none shows "No email on file. Click to add one." in the list; click the row to add their email, or add it on their profile and pick them again. When you pick a whole unit, an owner on it with no email is still counted as Invited, but gets no email.

The invitation email

  • Subject: Survey for {your association's name}. The survey title isn't in the subject unless you add it.

  • The body says your association has invited them to complete a survey, shows the survey's title and description, and has a Take the Survey button.

  • The button opens the survey after the owner signs in to PayHOA. Owners who haven't set up their login yet need to do that first; see Invite owners to the portal.

  • The email also goes to any extra email addresses on the owner's profile.

In Preview & edit email you can change the Subject and the text. Type { to add a field such as Survey title to the subject or body.

Note: Preview & edit email shows PayHOA's newer email design, with a Take the survey button. If you click Share with N owners without it, and your association hasn't saved its own survey invitation, owners get the older plain design instead. The subject and the link are the same. To send the design you previewed, use Send this once or Save for future emails and send.

Only shared people can answer

Only people you share the survey with can open and answer it. The Invited count on the Surveys list counts only these shares.

If you paste the survey link into a Broadcast email or a Message Board post, owners who weren't shared the survey can't open it, and they aren't counted as Invited. Share the survey with them instead.

Nudge people who haven't answered

The Surveys page has no reminders and no end date. To remind people:

  • Share again with the same units or owners. You can pick people who were already invited. Everyone you pick who hasn't answered gets the invitation again. People who have already answered don't get another email, and nobody is counted twice.

  • Ask Gable, in the AI Assistant panel, to remind the people who haven't answered. The subject is Reminder: survey for {your association's name}, and each person is reminded once. If an administrator turns on Autopilot's Votes and surveys area, Gable can do this by itself. See Gable in each module.

  • Or send a Broadcast email asking owners to look for the survey email or open Surveys in their menu. See Send an email to owners.

When you've heard enough, close the survey. See Survey results, respondents and closing.

Edit or copy a survey

Click the survey's title on the Surveys list to open Edit survey. Change what you need and click Update survey. You'll see "Your survey was successfully updated. Don't forget to share it!" and the Share survey dialog opens again. Click Cancel if you don't need to share it.

Once anyone has answered, the Questions card reads "Questions can't be changed once the survey has responses." You can still change the title and description.

To fix a question after responses have come in:

  1. On the survey's ⋯ menu, click Copy. You'll see "Survey copied" and the copy opens in the editor. It has the same title, description, anonymity and questions, but no invites and no responses.

  2. Fix the questions, rename it if you like, and click Update survey.

  3. Share the copy. People who answered the original will need to answer again.

  4. Close the original survey.

Copy, Edit and Share are only in the menu for open surveys.

Troubleshooting

You see

What it means

"There was a problem creating your survey. Please try again later."

Usually you don't have Write on Surveys. Ask an administrator to add it. If you do have it, try again, then contact support.

Create survey or Update survey is greyed out, with "Survey title is required." or "Survey description is required."

Fill in both fields.

"Please make sure all questions have text."

A question has no Question text.

"Pick the question and answer for each "Show only when", or switch it off."

A Show only when is missing its Question or Answer. Pick an earlier multiple-choice question and one of its answers.

"There was a problem uploading your file."

An image choice didn't upload. Try again, or try a different image.

Preview & edit email isn't there

You need Write on Broadcast.

"The survey could not be shared with any of the selected member(s)."

Nobody you picked could be invited. Check that they're current owners with an email address.

An owner can't open the survey link

They weren't shared the survey, or it's closed. Share it with them, and check it's on the Active tab.

An owner can't submit the survey

A question has no choices to pick. Copy the survey, fix the question and share the copy.

If you contact support, include the survey's title and the owner's name or unit.

What's next

Did this answer your question?