Everything you change in the Website builder saves to a draft as you go. Visitors see nothing until you publish. This article covers checking your draft with Preview, publishing it, throwing away changes you don't want, and going back to an older version of your site.
Before you start: you need write permission for the Website builder. Open it from Other Tools → Website builder.
Draft and live
The status line at the top of the builder tells you where your draft stands:
Status line | What it means |
"All changes saved · Not published yet" | The site has never been published. Visitors can't see it. |
"All changes saved · Unpublished changes" | Your draft is different from the live site. Publish to show the changes. |
"All changes saved · Published {date}" | The live site matches your draft. |
"All changes saved · Offline since {date}" | You took the site offline. See Take your site offline or start over. |
"Couldn't save" with Retry | A change didn't save. Click Retry before you publish. |
Preview your draft
Click Preview at the top of the builder.
The Website preview opens on your Home page. To see another page, pick it in the Page list at the bottom, or click a link in the preview's menu.
Hidden pages are in the list, marked (hidden), so you can check them before you show them. They still stay off the live site.
A few things only work on the live site:
Documents don't open from the preview. Check them on the live site after you publish.
A Contact form block doesn't take answers in the page editor (it says "Works on your live site"). Test it on the live site.
If something on a page didn't save, you see "Not previewed" and "Some changes have not saved yet. Fix or retry them, then preview again." Fix the highlighted block or click Retry, then preview again.
In the page editor, View live opens the published version of that page in a new tab. It's greyed out with "Not published yet" until the page is live.
Publish your site
Click Publish at the top of the builder or the page editor. You can also open the Publish menu (the arrow beside it) and click Review what will change. Both open the same dialog.
Read the Publish your site? dialog:
The first line says what happens: "Your site goes live for the first time, for residents and anyone on the internet.", "Everything in your draft replaces what visitors see now.", or, after the site was offline, "Your site comes back online at its address, for residents and anyone on the internet."
Site URL, Status and Last published.
What will change, for example "7 pages will change.", "Old addresses that will keep working: /old → /new", "Comes off: {page title}" for each page you deleted or hid, and how many documents will come down.
Click Publish (the first time, and after the site was taken offline) or Update (while the site is live).
You see "Site published" or "Site updated". Visitors see the changes within about 5 minutes. If they still see the old version after that, ask them to refresh the page.
Note: a change that's shared by every page, such as colors and fonts, the header, menu, footer, contact details or documents, counts every page as changed. That's why the dialog can say every page will change after a small edit.
Note: the Site URL in the dialog is always your .site.payhoa.com address, even when you've connected your own domain. Your own domain keeps working.
PayHOA doesn't send an email when you publish. Tell your board or residents yourself if they're waiting for a change.
To open the live site, click the Publish menu → View live site. It opens your own domain if one is verified, otherwise your .site.payhoa.com address.
Throw away unpublished changes
To put your whole draft back to exactly what's live:
Open the Publish menu → Discard all unpublished changes. It only shows when you have unpublished changes.
Read Discard unpublished changes?: "The editor goes back to exactly what's live now. This can't be undone."
Click Discard changes.
This puts back everything in your draft: pages, menu, header, footer, site settings, widgets and the list of documents on your website. A document you removed from the website but hadn't published yet goes back on the list. Penny's own documents and settings don't change.
To throw away changes to one part only (one page, the header and menu, the footer, or site settings), use Version history instead.
Use version history
Every publish is kept, so you can go back to what your site looked like before.
Click the Version history icon (the clock) at the top of the builder. It's also on the Header & menu and Footer tabs and in the page editor.
In Part of the site, pick Whole site, Site settings, Header & menu, Footer, one page, or a page under Deleted pages.
Part of the site | What it holds |
Site settings | Community name and logo, search settings, colors and fonts, your widgets (amenities, board members, FAQ, Resident Portal, contact details, calendars) and the list of documents on your website |
Header & menu | The menu and the header buttons |
Footer | The footer |
A page | That page's blocks and page settings |
Whole site | All of the above |
The list shows, newest first:
Row | What it is |
Your draft | Your unpublished changes. Throw away my changes puts this part back to what's live. |
Live now | What visitors see, with who published it and when. |
Published {date} · replaced on {date} | An older publish. |
Saved | A copy kept before a big change, such as "Saved before start over", "Saved before a restore" or "Taken offline {date}". Sites moved from the first version of the builder may also have "Before the new builder". |
Go back to an older version
Click the version you want. It opens beside your draft, with a list of what's different under Compared with your draft. Switch the preview between Your draft and This version, and between Desktop and Phone.
Click Start a new draft from this version.
Click Start new draft to confirm.
Your draft now matches that version. Your previous draft is saved in Version history first, so you can come back to it. Nothing changes on the live site until you publish. When you're happy with the draft, publish it.
Important: going back to an older Site settings or Whole site version also puts the list of documents on your website back to how it was then. A file you took off the website since can return to the list, and it goes public again when you publish. Check Widgets → Documents before you publish. See Put documents on your website.
The builder keeps your last 10 publishes and 20 saved versions. Older ones are removed.
Troubleshooting
What you see | What to do |
"Your site did not finish publishing. Please try again." or "Your site did not finish updating. Please try again." | Your live site hasn't changed. Click Try again. If it fails again, contact support (see below). |
"Not published" with "The {Block} block has nothing in it yet. Finish it or delete it, then publish." | An image gallery, video, map or contact form block is empty. Open the page, fill in the block or delete it, then publish. |
"Some changes on this page have not saved yet. Fix or retry them, then publish." | Fix the highlighted fields or click Retry, then publish. |
"Your changes could not be saved. Nothing was published." | Check your connection, reload the page, and publish again. |
The publish dialog says "Please save your website settings before publishing" | Nobody has changed the new site yet. Make a change first, for example choose your base address on the Domain tab. |
"This page changed somewhere else" | Someone saved the same page in another tab or on another device. Click Reload and make your last change again. |
"You switched organizations in another tab. Reload this page, then make your changes again." | Reload the page. Your last change didn't save. |
Visitors still see the old site | Wait about 5 minutes and refresh. Check the status line says "Published", not "Unpublished changes". |
A document doesn't open in Preview | That's expected. Documents open only on the live site. |
A version says "Too large to copy back", or "This version had too much content to save in full, so it cannot be put back." | That version held too much content to keep in full. You can look at it, but you can't start a draft from it. Pick another version. |
If publishing keeps failing, contact PayHOA support. Include your association's name, the time you clicked Publish, the exact message, and what you changed since the last publish. The message on screen is general, so support checks what happened on their side.



