When an owner pays by check, cash or money order, record it in PayHOA so their balance is right and the invoice shows as paid. You can record several payments at once, such as a stack of checks for one deposit.
Before you start: You need permission to edit payments.
Record a payment
Click Payments in the left menu, then Record payment. Record payment on a unit's page opens the same form. (Starting from the Invoices page, with an invoice's ⋯ menu or Actions, opens an older version of this form, where the option to pick invoices is called Specify payment application instead of Apply to specific charges. It's the same option. See Record a payment and how payments apply.)
Under Unit / Payor, search for the unit or owner and pick it. The unit's Balance and number of open charges appear below.
Enter the Amount.
Choose the Method: Check, Cash or Account Credit. For a check, add the Check #. Paid by Zelle, Venmo, wire, money order, or a card you ran on your own card reader outside PayHOA? Choose Cash and say how it was paid in the Note. Don't choose Account Credit for money you actually received: that method is for credit you grant, with no money coming in. See Account credit.
Set the Payment date: the date on the check or the day you received the cash.
If the unit has more than one owner, choose who paid under Attribute to owner. You can also pick a prior owner.
Add a Note if you like.
Leave Email receipt on to email the owner a receipt. To record a payment without emailing a receipt, turn Email receipt off for that payment. You can send the receipt later from Payments with ⋯ → Send receipt, one payment at a time; there is no way to send receipts for many payments in one go afterwards. See Record several payments at once for the closest thing to it.
Choose which invoices it pays
By default the form spreads the payment over the unit's open invoices oldest first: the invoice that became active first is paid first, which is nearly always the one with the oldest due date. If your association has Require Late Fees To Be Paid With Or Before Their Originating Invoice turned on in Settings → Preferences, each late fee is paid just before the invoice it was charged on, so a payment you record does pay a late fee ahead of its invoice. With that setting off, a late fee takes its turn by date like any other invoice. Turn on Apply to specific charges to see exactly how a payment will be applied before you record it.
A payment you recorded was split across invoices in a way you didn't expect? Don't delete it yet. See A recorded payment was spread across invoices in a way you didn't expect.
To choose the invoices yourself:
Turn on Apply to specific charges. The unit's open invoices appear, with the payment already spread across them.
Change the amount next to any invoice. Each one is capped at what's owed on it; if you go over, you'll see Max is $X and a Fix link.
Use Sort by or the search box to find an invoice, or click + Show all N charges to see the rest (Show fewer collapses the list again).
You can apply a payment to an invoice that isn't due yet (a Future invoice) this way.
Recording more than the balance
If the amount is more than the unit owes, the form shows Includes $X overpayment. The extra becomes account credit and pays the unit's next invoices automatically. See Account credit.
The Amount changes when you pick invoices, so a prepayment is recorded for less than you typed. With Apply to specific charges on, the payment's Amount follows the amounts next to the invoices: as soon as you change one of them, or click into one and out again, Amount is reset to their total. Each invoice is capped at what's owed on it, so that total can't be more than the invoices listed, and an overpayment or prepayment you typed in Amount is dropped. The form isn't putting in a wrong amount; it's limiting the payment to the invoices you picked. To record more than the unit owes, so the extra becomes account credit, turn Apply to specific charges off and check for Includes $X overpayment before you continue. To put a prepayment toward one particular charge, such as an assessment instead of dues, create that invoice first, then turn Apply to specific charges on and enter the amount next to it; it can be a Future invoice. See Which invoices a payment pays. The older form that opens from the Invoices page does the same with Specify payment application.
Record several payments at once
Click Add another payment and fill in the next one. The bottom of the form shows Total: $X and how many payments are ready, for example 2/3 ready.
When they're all in, click Continue to review.
Check the list. It also says how many receipts will be emailed. Nothing is recorded yet.
Click Confirm & Record.
Click Print to keep a deposit summary for your records, then Done.
The payments are recorded in the background. A Recording payments… card shows on the Payments page until they finish. You can leave the page.
If a payment couldn't be recorded. When recording finishes, the card reads All N payments were recorded. If one failed, it reads, for example, 2 of 3 payments were recorded. 1 couldn't be recorded. Retry them below, or contact support if this keeps happening. This applies to a single payment as well as a batch, and the card can change some time after you clicked Confirm & Record. Nothing was recorded for a payment that failed, so the owner's balance hasn't changed and retrying can't record it twice.
Click View Details on the card. Run details lists each payment as Recorded or Not recorded, with a Reason, for example This item never finished processing, so nothing was recorded. or Another payment for this account was still processing, so nothing was recorded.
Click Retry N payments to run the failed ones again. The payments that were recorded stay as they are; don't enter those again.
If the card then reads N still couldn't be recorded after retrying. Please contact support., don't enter the payment a third time. Contact PayHOA support with the unit, the payment's amount and date, and the reason shown. Export run (CSV) in Run details saves the list to send. For accounting questions about the payment, see How do I reach accounting support?
If the card says We've lost track of this run., the recording is very likely still going. Click Check again rather than recording the payments a second time.
Entering a batch and emailing the receipts at the end. Receipts aren't sent as you type. Every payment in the batch that has Email receipt on gets its receipt when you click Confirm & Record, all together, and the review step tells you how many (N email receipts will be sent to homeowners). So to enter all your payments first and send the receipts at once, enter them in one batch with Email receipt left on. If you record payments with Email receipt off, the receipts can only be sent afterwards one payment at a time (⋯ → Send receipt); there is no bulk send.
Add a deposit to your books
If your bank account isn't linked to PayHOA, you'll see Create deposit on transaction ledger below the payments, before you continue to review. Turn it on and choose the Deposit date and Deposit account to add one deposit for these payments to Transactions.
If you leave Create deposit on transaction ledger off (it starts off), the payments are still recorded on the owners' accounts, but no bank deposit is added to Transactions. That is why a deposit of owners' checks can be missing from your reconciliation even though every payment shows on the owners' accounts: the deposit was never created in your books. To fix it afterwards, add the deposit by hand on Transactions (Add transaction, as Income, on the bank account, for the deposit total), then click ⋯ → Link payments on it and tick the payments that were in it. See Add a transaction and Link payments to a deposit.
If your bank is linked, or you use the PayHOA financial account, this option doesn't appear. Instead, match the payments to the deposit when it comes in from your bank. See the Transactions articles.
Taking a card payment in the office or over the phone
Staff can't take an owner's credit or debit card payment in PayHOA. Record payment only offers Check, Cash and Account Credit, and there's nowhere for an admin to type in or swipe an owner's card or add a payment method for them. A card or bank payment through PayHOA has to be made by the owner, signed in to their own account. They can do that on a phone, a tablet or a computer in your office; see Pay your HOA online.
If you ran the card yourself on a card reader or another service outside PayHOA, the money didn't come through PayHOA, so record it like any other outside payment: Method Cash, with Card, paid in office (or similar) in the Note.
Troubleshooting
When the form won't let you continue, the message tells you which payment to fix.
Message | What to do |
No owner, can't select | The unit has no owner. Add an owner to the unit first. |
Payment N: a charge amount exceeds its max | An amount under Apply to specific charges is more than that invoice's balance. Click Fix. |
A payment you added with Add another payment doesn't load the unit's Balance or charges after you pick the unit, and Continue to review stays greyed out | The form reads each unit's open invoices when you pick it, and Continue to review stays off until every payment has finished loading. Give it a few seconds. If one row never loads, remove it with the trash icon on that payment and add it again. If it still won't load, record the payments that did load, then start a new batch for the rest. Nothing is recorded until you click Confirm & Record, so closing the form doesn't post anything twice. If added rows fail to load every time, contact PayHOA support with the units you were entering and a screenshot of the form. |
Payment N: select a unit or payor | Continue to review stays off until every payment has a unit or payor. Fill in the one named. |
Payment N: enter a payment amount | That payment's Amount is empty or zero. |
Payment N: No owner found for this unit. Please select an owner. | The unit has no owner to attribute the payment to. Pick one under Attribute to owner, or add an owner to the unit. |
Please select a deposit account. | You turned on Create deposit on transaction ledger. Choose a Deposit account. |
One or more of the charges you are attempting to pay was deleted after this form was opened… | Someone changed the invoices while the form was open. Close the form and open it again. |
The Amount I typed changed, or the payment was recorded for less than I typed | Apply to specific charges is on, and the Amount was reset to the total of the amounts next to the invoices. To record an overpayment or prepayment, turn it off. See Recording more than the balance. |
After I recorded a payment, the Payments page says it couldn't be recorded | Nothing was recorded for that payment. Click View Details, then Retry N payments. If it fails again, contact PayHOA support. See Record several payments at once. |
To change or remove a payment after it's recorded, see Edit, delete or fix a recorded payment.

