Crop Vigour colours your paddocks on the Map by how green and dense the crop is, using recent Sentinel-2 satellite images (NDVI). Use it to spot the weaker or patchy parts of a paddock and decide where to walk first. The date list covers about the last 120 days. Older images are in Phase Spatial, on Phase Ultra.
Before you start
Each paddock needs a mapped boundary. Crop Vigour only colours paddocks with a boundary.
It works the same on a computer and in the phone app.
Turn on Crop Vigour
Open Map.
Open the layers menu:
On a computer, select Layers in the tool bar at the top left of the map.
On a phone, tap the round Layers button in the column of buttons on the right of the map.
Select Crop Vigour. A tick beside it shows it is on, and the Crop Vigour panel opens.
To turn it off, select Crop Vigour in Layers again, or close the panel with its X. Only one of Crop Vigour, Soil and Rain / wind shows at a time.
Choose an image date
In the Crop Vigour panel, open the Image list. The newest image is chosen for you. The list holds up to 12 dates from the last 120 days.
Pick a date. Phase loads that image and clips it to your paddock boundaries.
Each date also says which satellite image it uses. Most say Sentinel-2 L2A. A date marked Sentinel-2 L1C fallback comes from a less-processed copy of that pass, which Phase uses when the usual one isn't available, so its values can read a little differently.
Zoom in for a sharper picture. Phase then loads only the paddocks in view.
Read the colours
Colours, under the image date, has two choices. The map opens on Whole farm.
Whole farm uses the same NDVI scale for every paddock and every date, so colours compare fairly across the farm and over time.
Red and orange: bare ground, a stressed crop or very little cover.
Amber and yellow: a crop that is establishing.
Light to mid green: active growth.
Deep green: a dense, healthy canopy.
The colour bar in the panel runs from Low (bare/stressed) to High (dense, healthy). On a computer it also shows the values: below 0.15 is Bare / stressed, 0.30 is Establishing, 0.60 is Active growth and 0.90 or more is Dense canopy.
See the patterns inside a paddock
Most of a crop often sits in a narrow band of NDVI that Whole farm draws as two or three shades of green. Each paddock spreads the same red-to-green colours across each paddock's own lowest and highest readings for that date, so a poor corner, a wet strip or a header-width stripe stands out.
In the Crop Vigour panel, select Each paddock under Colours.
Tap a paddock. The panel shows its range, for example "North 1: NDVI 0.55 to 0.70".
The colour bar then runs from Lowest in the paddock to Highest in the paddock. Colours can't be compared between paddocks this way, and on a computer the panel says so. A very even paddock is never stretched over less than 0.1 NDVI, so small differences aren't drawn as red and green patches. A paddock without enough clear readings on that date stays on the whole-farm colours. The satellite image is the same either way; only the colouring changes.
Bright cloud shows as pale, off-white patches. Ignore those areas, or choose another date. On a computer, the panel also says how cloudy the whole satellite image was, such as "scene cloud 35%".
See a paddock's NDVI numbers
With Crop Vigour on, tap a paddock.
The paddock opens with a Crop Vigour section at the top, for the image date you chose. It shows:
A word for the paddock as a whole (see the table below).
Mean NDVI: the paddock's average.
Low and High: the lowest and highest readings in the paddock.
Clean px: how many usable 10 m squares the numbers came from.
Mean NDVI | Word shown |
Below 0.25 | Low vigour |
0.25 to 0.45 | Patchy |
0.45 to 0.65 | Good cover |
0.65 or more | Strong growth |
No usable readings | No clear image |
Look at older images
The Image list on the Map only goes back about 120 days. For older satellite images, use Phase Spatial, which lists the satellite passes over a paddock in the last 12 months. Spatial needs Phase Ultra.
Select More → Paddocks & crops → Spatial.
Choose the paddock.
Select Actions → Import layers → Satellite.
Pick the dates you want. Each date shows its cloud cover, and each one becomes its own NDVI layer you can view and build zones from.
See Bring data into Phase Spatial for the full steps.
What NDVI can and can't tell you
NDVI measures the light reflected by green, growing plants. Higher values generally mean a denser or greener canopy. NDVI does not tell you why a value is high or low.
Crop stage, bare soil between rows, cloud and haze, moisture, weeds, pests, disease and other conditions all change the reading. Each image is the crop on one morning, seen in 10 m squares, so it shows patterns across a paddock rather than single plants.
Use Crop Vigour to choose where to look, then check the paddock yourself or with your agronomist before you act.
Good to know
Sentinel-2 passes over every few days, so the 12 dates in the list often reach back less than 120 days. Cloudy dates are listed too; if one is cloudy, try the next.
The paddock's numbers count every reading over it, cloud and haze included, so cloud pulls Mean NDVI and Low down. Check the picture looks clear before you rely on the figures.
Crop Vigour only shows images. It doesn't change anything in your paddocks, plans or records.
The Crop Vigour panel hides while you are placing a note on the map, and comes back when you finish.
If something doesn't look right
"Add field boundaries to view Crop Vigour imagery." None of your paddocks has a boundary yet. See Draw, import or export paddock boundaries.
A paddock isn't coloured. Check it has a boundary. Then try another date, and check your internet connection.
The paddock shows No clear image and "--" values. There were no usable readings on that date, most likely because of cloud. Choose another date.
"No scenes found" in the Image list. No satellite images were found for your paddocks in the last 120 days. Try again later.
"Crop Vigour could not load…" with a date range. Choose another image date. If the paddock's numbers failed, select Try again.
"Satellite imagery is busy." The satellite service is overloaded. The map still works. Turn Crop Vigour off and on again in a few minutes. If it says it is showing cached imagery, the last view stays on screen until fresh imagery loads.