You can bring a whole season of completed work across from your previous farm software, so past seasons show in reports and gross margins. Upload the season's farm performance (season actuals) report PDF or an activities CSV, check the paddocks, and Phase records each pass with its date, products, rates, quantities and costs. A paddock that "doesn't add up" is a normal check, not a failed import, and the fix is in its own section below.
Before you start
What to export. From your previous farm software, export the season's farm performance (season actuals) report as a PDF, with paddock details included. An activities CSV is quicker and more accurate, if it can export one.
Permission. You need to be able to edit crop plans and record completed work. Owners, co-owners and admins always can. Employees can unless Crop plans and recommendations has been switched off for them (Record completed work is always on for staff). Advisors can't record completed work, so they can't import actuals. View-only logins can't either.
Trial limit. On trial you can import 5 crop plan or farm performance reports. A Phase subscription has no limit.
File size. A PDF can be up to 25 MB.
Upload the report
Open More → Imports & templates → Actuals Import (the same on a computer and a phone). This opens the Crop Plan Import page, which reads both crop plans and farm performance reports.
Select Upload PDF or CSV and choose the report.
Keep the page open while Phase reads it. Phase checks every figure against the totals printed in the report, and reads a paddock again when they don't match.
Check the season
Under What should this become?, check that Season history (actuals) is selected, not A crop plan.
Check the Season, and type or pick another if it's wrong. Phase starts on your own season for the report's year, for example Winter 25 for a 2025 report. On a farm with summer and winter crops, a report labelled for one half, such as Winter 26 or Summer 25-26, goes into that half. Phase creates the season if it doesn't exist.
If a Farms section shows, choose which of your farms each farm in the report is. Paddock matching then stays inside that farm.
Match the paddocks
Under Paddocks: the one thing to check, Phase lists any paddock it couldn't match by name and area. For each one:
Open Choose your paddock… and pick your paddock (you can type to search).
For a paddock you don't have yet, choose Add "…" as a new paddock instead, then check its Paddock name, Area (ha) and Farm. If you already have a paddock with exactly that name, Phase matches it to that one instead.
To leave a paddock out, choose Skip this paddock and leave it out.
Add all … as new paddocks or Skip all … settles several at once, and Show the … Phase matched lists the rest. Phase never matches a paddock with a different number or letter: North 1 is never matched to North 10 or North 2.
Check the products
Under Products: nothing you have to do, products link to yours by name. Anything unlinked imports exactly as printed (name, rate and cost), which is all history and cost reporting need.
Link to a product… links one by hand. Phase remembers the report's name for next time.
The row's ••• menu has Add as new product, Import by name only and Skip (leaves that product out).
An operation named as a cost (cartage or freight, lease or rent, a levy, fee or receival, insurance, hire, contract or aerial work) is recorded as that kind of cost, shown as, for example, "cost: Lease & rent". It adds up under its own row in Financial Performance. Seeding, spraying and other operations stay as machine work.
A paddock says it doesn't add up
This is a normal check, not a failed import. A Doesn't add up panel means the activities Phase read come to less (or more) than the total the report prints for that paddock. It blocks the import until you resolve it.
Find the paddock under What will be recorded (it opens by itself) and check the PDF pages the panel names.
Fix it one of these ways:
Untick a misread row. A row marked "Misread" shows its lines' total against the printed one.
Select Add the missing activity, enter the Activity name, Date and Area (ha) and each product as printed with its rate, unit and total $, then select Add activity.
Tick Import as read: I've checked the PDF, only after comparing the PDF and accepting the difference.
The panel then says "Adds up now".
Answer costs that look 1,000× too high
A Costs that look 1,000× too high panel, below the products, lists any product reading more than $1,000 a hectare. That is usually a cost printed to three decimals and read 1,000 times too high. It blocks the import until each product is answered:
Use with the likely figure, for example Use $21.52/ha: that product's $/ha and cost are divided by 1,000 on every paddock.
Keep as printed: the figure imports as the report shows it.
Machinery and contractor lines are not asked about.
Record the work
Under What will be recorded, open a few paddocks and compare them with the PDF.
If the report prints no date on some work (usually each paddock's Operations, such as harvest, cartage and receival fees), set Date for undated work under Record as season history. The 36 without a date lists what that one date covers.
Select Record … completed activities on … at the foot of the page, for example Record 86 completed activities on Winter 25. If something still blocks it, a line beside the button says how many, such as "2 things to sort out before importing", and Record as season history lists them.
Read the Record this work? check, which restates the season and how much will be recorded.
Select Record work.
The receipt, Season history recorded, shows what came in. Use Open reports to spot-check several paddocks against the PDF. What next suggests a few next steps.
Import from an activities CSV
Upload the CSV with Upload PDF or CSV and Phase reads it straight away. Pick the season under Season to import and choose Season history (actuals). Completed activities (those with a date) come in exactly as recorded, with their dates, products, rates, areas and costs. The rest of the review is the same. More from this CSV on the receipt brings in the file's planned work or another season without uploading it again. See Import activities from a CSV.
Undo an import
Straight away: select Undo this import on the receipt, then Undo import.
Later: within 7 days, open Actuals Import or Crop Plan Import again on the same computer or phone, in the same browser. Your last import shows what came in. Select Undo last import, then Undo import.
The later undo is kept only in that browser, for the person who made the import, and only for their latest import on that farm.
Undo removes the activities, plans and new paddocks the import wrote. Products it added stay, and the undo can't be reversed. It works only while nothing the import wrote has been edited, completed, reconciled, deleted or had stock deducted, and no other work has been added to its plans or new paddocks. If something has, Phase says what.
Good to know
Seeding or spreading. A pass that sows seed is recorded as seeding, even with MAP or another fertiliser on it. A pass with only fertiliser or chemical on it, such as a fertiliser pass called "At sowing", is recorded as a spread or spray.
Only what the review shows. New paddocks, products or a season are created only where the review says. Stock isn't deducted from your current Inventory.
No yields. Harvest yields are not recorded from the report. Add them in Yield Centre.
Crop and variety names. These are saved under the Phase library's names, for example "Maximus CL (CL)" as Maximus CL. The preview shows the report's wording after "as printed:", and the seeding pass keeps it in its notes. A name the library can't settle is saved as printed. The full list is in Upload and review a crop plan report.
No double-ups. Activities from an earlier import show "Already in Phase, skipped", so importing the same report into the same season again only adds what is missing. Work recorded by hand or from John Deere isn't recognised and would be recorded twice.
Every activity needs a date. Work printed with no date takes the Date for undated work. A day and month with no year ("16-Dec") takes the season's year, except a November or December spray before the season: in a 2025 report it is 2024. The read says so under the totals. Check late-December fertiliser on the Plan tab afterwards.
Where it shows. Phase switches to the imported season, and the work shows on each paddock's Plan tab.
The PDF is kept. It's saved in More → Money & records → Documents with the farm's history. A CSV isn't.
Older imports. Operations recorded by an import before 5 October 2026 aren't re-filed as costs.
Old bookmarks. An old link may open an older page also called Actuals Import, which takes PDFs only. Use the menu path instead.
If something doesn't look right
"Phase read every page but found no paddock detail pages". Export the report again with paddock details included.
It says the file is an agronomist recommendation. Select Open the recommendation importer.
You have an Excel file. Upload it as it is with Upload PDF or CSV: an .xlsx, .xls or .tsv of the activities export is read like a CSV.
A report wouldn't import before because of "… has no date". Upload the same PDF again: the dates now come from the report.
The PDF is too big. The limit is 25 MB. Email it to support@phase.ag instead.
The record button is off and mentions your role. Ask the farm owner or an admin to turn on Crop plans and recommendations for you. They do this in More → Settings → Organisation → Team → ••• on your name → Change role or details → What they can see. Staff always have Record completed work; advisers can't hold it, so an adviser can't import actuals.
It went into the wrong season or farm. Undo it, then import again.
It fails, the receipt says "Imported with some problems", or something doesn't look right. Email the PDF or CSV to support@phase.ag, say which paddock or activity looked wrong, and we'll import it for you. The Didn't work? We'll import it for you card has Email us the file, and the same offer shows under a read error and on the receipt.