Overview is Phase's home page: a grid of widgets for the weather, jobs, notes, lists, stock and the season. You can move widgets, make them wider or narrower, hide the ones you don't use (Livestock included, if you don't run stock), and pin the silos, tanks and weather stations you check most.
Where to find it
On a computer: select Overview in the top navigation. It is usually the first page after you sign in.
On a phone: tap Overview in the bottom bar.
The top of the page shows today's date, Tools and Customise. Arranging works the same on a phone, an iPad and a computer.
Move, resize or hide a widget
Tap Customise at the top of Overview, or hold any widget for about half a second (on a computer, click and hold). The widgets start to wiggle.
Drag a widget to where you want it. The others slide out of the way.
To make a widget wider or narrower, tap the round button on its bottom-right corner. It switches between one column and two.
To hide a widget, tap the − button on its top-left corner.
Tap Done at the top of the screen.
Keep your finger still while you hold: if it moves, the page scrolls instead. Tapping a button or list inside a widget only uses that control.
Bring a hidden widget back, or reset the layout
Tap Customise (or hold a widget).
Tap Widgets, next to Done. Manage Overview lists every widget you can have, what it shows, and whether it is On or Off.
Switch on the widget you want.
Use Move up or Move down to put it in order.
To go back to the suggested layout and sizes, tap Reset recommended.
Tap Done, then Done again at the top of the screen.
The widgets are Weather Forecast (a rain radar map and the 7-day forecast), Notice board (the farm's jobs, notes and lists together), Notes, Lists, Conditions, Favourite assets, Favourite stations, Recommendations, Jobs, Livestock, Rainfall, Manual rain gauges, Deliveries, Work queue (imported jobs waiting to be reconciled), Plan summary, Financials and Farm progress, plus one for each connected weather station.
The Notice board widget stands in for Jobs, Notes and Lists, so a new farm starts without those three, and on a farm that had them they were swapped for the Notice board the first time Overview opened after the notice board came in. Nothing was deleted. Switch any of them back on in Manage Overview if you want it.
The Notice board widget sits third, after Weather Forecast (the radar map and the forecast). Phase moved it there once on every Overview; move it anywhere you like after that, and your order is kept.
Use the shortcut buttons on a widget
Most widgets have a way in at the bottom-right corner, such as Open or Open plan, and tapping the widget opens it too. Some widgets also have buttons for what you do most:
Notice board: Post opens the board ready to post a job, a note or something to get. Open board opens it. Pre-start check (once the farm has machines) starts a pre-start check. Tap the circle beside a job to mark it done, or beside a list line when it's got. Tap anything else to open it on the board. On a phone the card has the green +: New job, Add to a list, Write a note, Speak and Photo note post right there (see The notice board and Machinery).
Jobs (if you switched it back on): Check starts a pre-start check. With one checklist it starts straight away; with several, the Checks tab in Machinery lists them and you tap Begin. Job opens the Notice board ready to post a job, and Open opens the board.
Notes: Voice opens Speak right on the Overview: say what you saw and Phase writes it out and picks out the paddock. Photo opens the camera straight away (a file picker on a computer), then a small card to add a line, # the paddock and Post note. Neither takes you to the map.
Recommendations: Voice records a spoken recommendation. Write asks which paddock, then opens the composer.
Lists (if you switched it back on): Add opens Lists with the cursor in the add box.
You only see the buttons your role allows. On a narrow widget they show as icons: a clipboard with a tick and a + on Jobs, a microphone and a camera on Notes, a microphone and a pen on Recommendations.
What the Progress, Finance and Rainfall widgets count
Progress shows how much of the cropped area is planted, fertilised, sprayed and harvested. Any finished job with a fertiliser product counts as fertilised, so a seeding job with fertiliser counts for both. With summer and winter crops, the top line shows both halves (for example "Summer done · Winter 40%") and the bars show the half you are in.
Finance shows spending this season against the plan. It counts each job in its crop plan's season, as Financial Performance does, so the two agree and earlier-season work marked done this year stays in its own season. With summer and winter crops it covers the whole crop year.
Rainfall opens on the year so far. To see the past 12 months, tap the period (for example 2026 YTD) and choose Last 12 months. Phase remembers this for that farm on that device. A connected station needs a full year of records first.
Pin your silos, tanks, troughs and weather stations
On the Favourites widget (for silos, tanks and troughs) or the Stations widget, select Edit.
Under Add, tap + beside each one you want. Each widget holds up to 8.
Under Pinned, use the arrows to change the order, or × to take one off. A square widget shows the first 4; a wide one shows all 8.
Tap Done.
Your pins are kept for you on that farm, on every device, and don't change what anyone else sees.
Tap a pinned asset to open it large: how full it is, what is in it, its last few records, and buttons for what you record there.
Silo, shed or stack: Load in, Load out, Move, Fumigate, Check and Correct.
Fuel or fertiliser tank, IBC or other input tank: Delivery, Draw and Dip.
Water tank or dam: Check, Level and Fault. Trough or bore: Check, Leak and Fault.
The link at the bottom (Open in the Yield Centre for a silo, shed or stack, Open in Inventory, Open in Inventory → Water or Open in Livestock → Water) opens its full page. Troughs, and tanks for stock or with no use set, open in Livestock; spray, house and fire-fighting tanks open in Inventory. Remove from Favourites in the same panel unpins it.
Each pinned station shows its temperature, wind and rain in the last 24 hours. Tap one to open its weather station screen.
Use the Tools on Overview
Tools, beside Customise at the top of Overview, opens a list of small checks for the paddock and sums for the shed. Each tool opens over the list, and Tools at its top takes you back.
Check in the paddock: Harvest loss, Spread pattern, Yield estimate (count heads in a quadrat, read t/ha), Nozzle check (a 30-second jug test that names any nozzle more than 10% out), Seeder calibration (catch, weigh, then adjust the rate), Water check (time a bucket under the float valve: does the trough keep up?) and Measure (Walk it, Drive it or tap corners On the map).
Work it out: Seed rate, Test weight, Convert, Dose and withholding and Timers.
Already in Phase: Harvest moisture and Spray windows open the Conditions outlook.
Harvest loss. Pick the crop and the tray size (0.1 m² to 1 m², or Custom size). Drop the tray behind the header, then under What landed in the tray choose Weighed it and type the grams, or Counted it and take a photo. Add the Front width, Chaff spread width, Paddock yield and Grain price. Phase reads the loss in kg/ha, dollars a hectare and over the paddock, and as a share of the yield: Tight under 1%, Worth a look to 3%, Costing you above that. Under Save it against a header, pick the Header, the paddock and any Settings and notes, then Save this check. Your headers' checks on the same crop over the last six months are compared underneath, each with its average and latest loss.
Counting from a photo (harvest loss, spreader trays, yield heads). Counting starts as soon as the photo is taken. Phase rings each grain or granule it finds. Missed one? Tap it on the photo. Tap a ring to take it off, and Undo steps back. You can type over the count.
Spread pattern. Say how wide the spreader throws and how many trays you have, and Phase says where to lay them. Drive over the middle tray, then tap each tray to photo or count what landed. Under How you drive the paddock, choose Back and forth or Round and round. Once three trays are counted, the ground behind the spreader is shaded against the bout's average: Under 80%, 80 to 90%, 90 to 110% (on rate), 110 to 120% and Over 120%, each with how much of the ground it covers. Tap the ground to read any spot. Your pass alone shows one pass before the next passes fill in. Slide Bout width to see the evenness (CV%), or tap Widest even bout or Most even (each button names its width).
Timers keep running when you close the sheet or Phase, and Phase says when one is up. They are kept on that phone or computer only, and they can't ring a locked phone yet.
Only harvest loss checks are saved, and saving one needs permission to record work or edit the farm. Every other tool works it out on the spot. Photos are counted and not kept.
When the farm isn't set up yet
Phase always opens on the Overview, however much of the farm is set up. The Welcome to Phase window and the Finish setting up checklist are gone: a new farm is set up in the steps straight after it is named (see Getting started with Phase).
With no paddocks yet, a small message at the bottom says Your farm has no paddocks yet, with Add paddocks to open the setup steps.
With paddocks that aren't on the map, it says Your paddocks aren't on the map yet, with Farms & Fields.
It shows at most once a day on each device, and only to the owner, co-owners and admins, not to staff.
Replay a page's walkthrough
Each main page shows a short walkthrough the first time you open it on each phone or computer. It shows how to start, what to check before saving or importing, and where to find the result. To see it again:
On most pages, choose Quick walkthrough in the menu at the top (usually Actions).
On the Map, choose Layers → Quick walkthrough, on phones too.
On Overview, tap the round help button below the widgets.
Short notes when something changes
When a screen you already use changes, Phase shows a short note there once. For example: New: the notice board on Overview, More has been streamlined at the top of More, New: Fluids, pressures & specs on a machine, New: sign on and off, and Livestock has improvements in Livestock. Crop Plan Studio, Templates, the Map and an adviser's workspace have their own. Forms are now step by step shows once on Overview to people who record work and used Phase before 11 November 2026: filling a machine, a tank delivery or dip, stock in and out, meter readings, silo checks, water records, Load in and Load out, and rain on a gauge now ask one thing at a time, then show a check card. Got it closes it on every device.
Only people who used Phase before the change see a note, and only the lines that apply to them.
Most notes are remembered for the person, so closing one on your phone stops it on the office computer too.
Closing a note changes nothing on the farm. To see one again, use Actions → What's new in Crop Plan Studio or an adviser's workspace, or Layers → What's new on the Map.
Good to know
Hiding a widget only changes Overview. Your records, stations, mobs and jobs are untouched.
Your layout (order, sizes and hidden widgets) is saved on the phone, tablet or computer where you arranged it, not with your login, and it is the same for every farm you open there. Favourites follow you to every device.
An adviser's Overview on client farms has its own layout, separate from their own farm's.
Weather Forecast, Rainfall, Financials and Farm progress are always wide, so they have no size button. At least one widget always stays on.
Deliveries is off until you switch it on. Connecting CBH LoadNet switches it on for you. It opens Yield Centre's Loads tab. It counts the loads of the season picked at the top of Phase: before the first load of a new harvest it reads, for example, "No loads delivered yet in the 2026 harvest". To see last harvest's, pick that season at the top.
Each connected weather station gets its own widget, listed by name in Manage Overview. A new station appears automatically unless you hid it before.
The old bottom metrics tile is gone. Its figures are in Crop Plan Studio (the Plan page) and Financial Performance.
If something doesn't look right
A widget isn't in Manage Overview. Some depend on your role: Financials needs permission to see finances; Jobs and Work queue need permission to record work; Notice board isn't offered to view-only logins, or to the adviser on a farm an adviser's practice runs; Recommendations, Plan summary and Farm progress need access to recommendations or crop plans. On a farm an adviser's practice runs, Livestock isn't offered, and Lists isn't offered to the adviser or to view-only logins. Ask the owner or a manager to check your role.
There's no Check button. On the Notice board widget it reads Pre-start check, and shows once the farm has a machine. You can also start one from More → Daily work → Machinery → Checks.
My Jobs, Notes or Lists widget has gone. They are one Notice board widget now, and every job, note and list is on it. To have one back as well, tap Customise → Widgets and switch it on.
A widget I hid still shows on my other device. The layout is saved per device. Hide it there too.
I hid a widget on one farm and it's gone on my other farm too. On one device, all your farms share one layout. Switch it back on under Customise → Widgets.
There is nothing to pin. Add silos, sheds and stacks in Inventory → Grain & Hay, fuel and fertiliser tanks in Inventory → Locations, and water tanks and troughs in Inventory → Water or Livestock → Water. Connect weather stations in More → Integrations → Weather stations & sensors. Manual rain gauges have their own widget instead.
A pinned asset has no buttons, or some are greyed out. People who can't record against it see its level and history only. On an empty silo, shed or stack, Load out, Move, Check and Correct are greyed out, and so is Draw on an empty tank.
The welcome popup or setup checklist has gone. Both were retired. The Overview offers Add paddocks once a day while the farm has none, and every setup step is in More (Farms & Fields, Crop Plan Import, and Settings → Organisation → Team).