Skip to main content

Use soil data on the paddock, in Compare and in Spatial

Mark events on a paddock's soil chart, compare soil across paddocks, and use soil results in Spatial.

P
Written by Phase Team

Once your soil tests are in Phase, you can pin notes to a paddock's soil chart, compare the latest results across every paddock in Crop Plan Studio, and use them as layers in Phase Spatial. This article also covers linking results that were sampled by zone to the zone map they came from.

Before you start

  • Your soil results need to be imported first. See Import soil tests.

  • Adding, changing and deleting chart markers needs permission to edit the farm.

  • Phase Spatial comes with Phase Ultra and the free trial.

Mark an event on a paddock's soil chart

Pin a short note to a month on the chart, such as "Lime sand spread" in March 2019, so you can see what happened when the pH moved.

  1. Open the paddock on the Map and go to its Soil tab.

  2. Tap the reading's row, such as pH, to open its trend chart.

  3. Select Add marker above the chart.

  4. Pick the Month and Year.

  5. Under Note, write what happened (up to 500 characters).

  6. Select Save. A yellow line runs the full height of the chart at that month.

Point at the line, or tap it on a phone, to read it, such as "Mar 2019 · Lime sand spread". The chart's markers are also listed under it. To change or delete one, select its Edit, then change it and select Save, or select Delete.

Where markers show. You add, change and delete them only on the paddock's Soil tab. The same lines show, view only, on Soil Centre's Trends, a paddock's soil detail in Soil Centre, and the soil charts in Crop Plan Studio.

Compare soil across paddocks

In Crop Plan Studio (the Plan page), select Compare, then Soil. Each paddock's latest results show side by side at one depth. When your tests have more than one depth, choose the depth from the depth menu.

  • A paddock never tested at the chosen depth shows its most recent test at another depth in the same layer. The depth is printed under the date and under each value, so a 20–30 cm pH is never taken for a 10–20 cm one.

  • Hovering a value spells it out, such as "taken at 20–30 cm: no 10–20 cm test on record", and the note under the table says so too.

  • Topsoil never fills in for subsoil, or the other way round.

  • Chart plots only the chosen depth, so a paddock read at another depth has no line.

For the rest of Compare, see Compare every paddock in one table.

Use soil results in Phase Spatial

Each sampling year on a paddock becomes one soil layer in Spatial, named "Soil" and the year. It never mixes samples from different years.

  1. Open More → Paddocks & crops → Spatial and choose the paddock.

  2. On the Layers step, switch on the soil layer for the year you want.

  3. Choose the Measurement and, where the results have them, the Depth.

A measurement shows when that year has at least three numeric results for it, from sites with a location. Spatial can use pH (CaCl₂), pH (H₂O), organic carbon, total N, nitrate N, ammonium N, Colwell P, Colwell K, sulfur, PBI, salinity (EC), CEC, aluminium and gravel.

A site has a location when its sample had latitude and longitude, or when it has been linked to a zone boundary (below). A result matched only by paddock name shows in Soil Centre but can't make a Spatial layer. The Layers step says how many soil results "can't be mapped yet", with a Link results to zones button.

If you ask Spatial's agent to "make a zone map" with no layers switched on, it uses the newest yield map, or the newest soil test if there is no yield map, and says which it used. To build zones yourself, see Build and edit a zone map.

Link results to zone boundaries

Use this when a paddock was sampled by management zone rather than by GPS point. Linking each zone to its result lets those results build a Spatial zone map or prescription.

  1. Import the lab results first.

  2. Open More → Paddocks & crops → Soil Centre → Add results. In Spatial, Link results to zones opens the same Soil test import page.

  3. Choose Zone boundaries.

  4. Select Choose a zone map file and pick a zipped shapefile (or the .shp and .dbf together), a GeoJSON or a KML file.

  5. Under Which column names each zone, choose the column with the zone names, or Number them in file order.

  6. Under Paddock these zones belong to, check the paddock. Phase picks it from where the zones sit in the file.

  7. Under Check each zone before importing, match each zone to the soil result sampled from it, or choose Don't import this zone. Each zone is marked Same name, GPS inside, Close match or Needs a choice.

  8. Check the map and the list.

  9. Select the import button. It shows the count, such as Import 2 zones.

The paddock list. Every mapped paddock is listed, the file's own paddocks first. Each is marked with how many zones the file has on it, or "no soil results yet". Before 19 October 2026 the list showed only paddocks that already had soil results, so a paddock without results was missing from it. That never meant its boundary was wrong.

A paddock with no soil results. Phase says there is nothing for the zones to link to yet, with two buttons. Import results takes you to the lab results import. Open Spatial is for zones that are variable-rate or management zones rather than soil-test zones: those go into Spatial instead, through Import layers → Upload on the paddock (see Bring data into Phase Spatial). A soil-type map comes in there with its zone names, such as Sand and Loam, and can make one zone per soil.

A file covering several paddocks. Phase shows one paddock's zones at a time ("Link them, then choose the next paddock"). Link that paddock's zones, then pick the next paddock from the list. Zones that aren't on any mapped paddock are counted and left out.

Good to know

  • A marker is only a note. It isn't a job or an application record and doesn't change stock or spray records.

  • A marker belongs to the paddock, not a sampling site, so it stays put when you switch sites. A marker before the first test or after the latest one isn't drawn.

  • Soil charts space tests by their real dates, so a gap between tests shows as a gap.

  • Deleting a paddock deletes its markers. Export everything includes them.

  • Phase Agent's soil summary for a paddock lists the markers in the chart's range, but the Agent can't add, change or delete them.

  • If a result already has a zone boundary, the review says "Replaces the zone already on this result". Results no zone claimed are not changed.

If something doesn't look right

  • There's no Add marker button. Tap a reading's row on the Soil tab to open its chart. A row opens once the site you're looking at has at least two tests. You also need permission to edit the farm.

  • The paddock I want isn't in the zone paddock list. Check the paddock has a mapped boundary. A paddock marked "no soil results yet" can still be chosen, but you need to import its results before the zones can link.

  • A soil layer or measurement is missing in Spatial. Check that year has at least three numeric results for that measurement, and that each site has a location or a linked zone.

Related

Did this answer your question?