Plant-back is how long, and sometimes how much rain, a chemical label says must pass before you sow a sensitive crop. Crop Plan Studio (the Plan page) counts the days and the rain for each paddock against rules you confirm from the label, for one paddock or the whole farm. Its Checks tab also compares sprays with harvest withholding periods.
Why does every paddock say Cannot tell, or "nothing has been checked"? Phase does not carry plant-back intervals of its own and will not guess them. It offers the directions it reads on your products' labels, but counts against a rule only once someone on the farm confirms it or types it in. After that, Phase does the counting for every paddock.
Before you start
Open Crop Plan Studio: on a computer select Plan in the top navigation. On a phone, go to More → Paddocks & crops → Crop Plan Studio.
Phase can only read a product's label when the product is linked to its Phase Library product in Inventory.
Only people who can edit crop plans can confirm, record or retire a rule, or set next season's crop. Owners, co-owners and admins always can, and staff and advisers can by default. Anyone else sees See the recorded rules… instead of Plant-back rules….
Check one paddock
In Crop Plan Studio, tap the paddock on the map.
In the planning panel that opens, select the Plant-back tab. The top line gives the paddock's state for the crop planned this season.
Read each product: when it went on (or is planned), the rate and the pass, then each requirement with its state.
Select View source rule to see the rule, its source and who recorded it.
Answer | What it means |
Appears satisfied | The recorded requirement appears to be met on your records. This is the strongest thing Phase says. |
Not satisfied | Not enough days to the planned sowing date, or not enough rain since application. Phase says the earliest sowing date, or how much more rain is needed. |
Review | Needs a look. For example, it is only met if estimated rain is counted, the rule has no figure Phase can count, or the label adds a condition Phase can't check. |
Cannot tell | Something is missing: an application or sowing date, a rain record, or a rate or soil test that can't be compared with the rule. |
Products listed under Not checked. No plant-back rule is recorded in Phase for: went on with no rule recorded. That is not a clearance. A completed pass whose product Phase can't identify is shown as Cannot tell, because whatever went on can't be checked.
How Phase counts. It looks at what was applied this season and the three before, counts the days to the planned sowing date, and adds up the rain that has fallen since.
Rain from your own station or gauge is "recorded".
SILO's patched or gridded days are "estimated". A requirement only met by counting estimated rain is a Review, not a pass.
A day with no record is unknown, not dry. Forecast rain is never counted.
Soil pH rules. Phase uses a soil test only when it is on the same basis as the rule (CaCl₂ or water), and reminds you that a test is a point, not the whole paddock.
Confirm a rule from the label
On the Plant-back tab, look under Found on the label. It lists the rules on the labels of products used on that paddock (this season and the three before, applied or still planned) for the crop planned now and the crop meant for next season, with the label page.
Select open label or the label's words and compare them with the rule.
If the label only says "all other crops" or "susceptible crops", choose the crop in the Which crop is this for? box.
Select Confirm to save it as a rule for that crop, with the label as its source. Or select Not this one to hide it. This only hides it on this computer or phone.
A rule given as "bioassay" or "the following season" has no figure to count, so it is saved as a rule to review. Rules for other crops are under Plant-back rules… → Found on the labels of this farm's products.
Labels that set intervals in a grid by soil pH (some chlorsulfuron and metsulfuron labels) can't be read into rules. Record those by hand.
Record a rule by hand
On the Plant-back tab, select Plant-back rules…, then Record a rule from a label….
Enter the Active ingredient, so the rule follows the chemistry across every brand, or the Product (optional with an active).
In Before planting, choose the crop, or leave it empty for any crop.
Enter the Interval in days, the Rain in mm, or both.
If the label splits the rule by rate or soil pH, fill in Rate from, Rate to and Unit, or Soil pH from, pH to and Measured in. Record one rule per row of the label's table.
Add Anything else the label says. Phase can't check this, so it shows as unverified.
Fill in Where it is written, the Source (Label, Adviser or Other) and a Link (optional).
Select Save rule.
A rule with no source is marked "No source recorded" wherever it is used. To stop counting a rule, open Plant-back rules… and select Retire beside it.
Herbicide-tolerant crops. A crop's rule covers its tolerant types unless the label names one. A canola rule covers a TT canola paddock; a "Clearfield canola" rule covers only Clearfield.
Check plant-back across the farm
On the map. Select the map's layer button (it reads Planned crop until you change it), then Plant-back.
Each paddock shows its worst state for this season's crop, in the same words as the tab.
Not satisfied has a heavy outline and Cannot tell a dotted one, so you don't need to tell colours apart.
A product that went on with no rule recorded counts as Cannot tell.
Paddocks with no crop or no chemistry on record say so, and are never shown as a pass.
The To look at layer and a selection's Checks tab include plant-back problems too.
As a list.
In the Studio's top bar, open Actions (the ••• button on a phone).
Select Plant-back across the farm…. Every paddock is listed with its crop, state and the products involved, worst first.
Tap a paddock to open it on its Plant-back tab.
Under the list, Label rules to confirm shows the rules read from the labels of products applied this season and the three before, grouped by product. Confirm them one at a time, or select Confirm all N for this product, then Save N. Confirm all leaves out any rule that still needs a crop picked. Nothing is saved without a tap.
Check against next season's crop
Select one or more paddocks and open the Plant-back tab.
Under Meant for (next season's year), type the crop you intend, then select Set. To remove it, empty the box and select Clear.
Read the result. For example: "This season's program may constrain the Lupins you intend for 2028", with the date before which it can't be sown.
Phase checks this season's chemistry, applied and still planned, against that crop. A planned pass has had no rain on it yet, and rain still to come is never assumed.
You don't need to build next year's plan, and nothing budgets from it. Intended crops show in Compare's later-season columns, marked "intended".
The Checks tab: withholding and other checks
With paddocks selected, the Checks tab shows a number when there is something to look at:
the same crop two or three seasons running
a pass dated on the wrong side of seeding (going by its name)
a conditional pass past its review date
the same herbicide group used twice this season, or again after last season
a spray too close to harvest
a spray over an undersown pasture whose label speaks to undersown crops
a plan line linked to the wrong product
a plant-back problem
It also says what couldn't be checked, such as a seeding pass with no date or a product with no herbicide group.
Harvest withholding. Each product is compared with the paddock's harvest (or windrowing) date and the period its label gives for that crop, for example "glyphosate 540: 4 days before harvest; the label's harvest withholding period for wheat is 5 days", with the label's words underneath.
It asks for a look instead of failing when the label sets the period only under a condition, when only the end of the spray window is too close, or when the pass is conditional.
It says what it couldn't check: a harvest with no date, a crop the label gives no period for, a product not linked to the Phase Library, or a label it couldn't read a period from. It never reports "no withholding period" for something it didn't find.
Grazing withholding isn't checked, because a plan has no grazing date. The label is still the authority.
Herbicide groups. Any common way of writing a group counts as one group: the letters used before 2021 ("B" is Group 2), "Group 14 (G)", "HRAC Group K3" or "Triazine". A product linked to the Phase Library uses the library's group. A product with no group recorded uses its active ingredient's group. You don't need to retype groups on your own products.
Good to know
Phase never says a paddock is safe to plant. Check the current label and your adviser before sowing.
You can ask in the Studio's Agent tab: "Which paddocks have a plant-back problem?"
The season plan PDF's Planning review page lists plant-back checks that aren't plainly satisfied. It doesn't count rain, so rules with a rain figure are listed for review.
If something doesn't look right
Nothing shows under Found on the label. Link the product to its Phase Library product in Inventory. If the labels did not load, try again with signal, or record the rule by hand. A rule hidden with Not this one stays hidden on that device.
A rain requirement only ever says Review. It is only met with estimated rain. Connect your own gauge or weather station.
A rule isn't counted. Check the crop and type match, and that the rule's rate unit matches the pass.
Days can't be counted. Give the seeding pass a date.
There's no Confirm button. Your role can't edit plans. Ask an owner or admin.