How to set up a Plaato Keg

Learn how to connect your Plaato Keg to WiFi

Kristofer avatar
Written by Kristofer
Updated over a week ago

Steps

  1. Using the supplied USB-cable, power on the Plaato Keg through a standard USB-charger that provides minimum 5V and 2Amps power supply.

  2. The three Led Lights on your Plaato Keg will all blink synchronized when it is on.

  3. Download the Plaato App for iPhone or Android

  4. Create a New Account - or Log In

  5. Click on "Add a Device"

  6. Sign into your WiFi. Please make sure you enter the correct SSID & Password. Your Plaato Keg connects to 2.4Ghz WiFi networks only.

  7. Make sure all three LEDs still breathe synchronized and click on "Ready"

  8. Now you have to connect to your device hotspot from the list of available WiFi in your phone settings. Click on "Go to Settings" or "Choose your Device"

  9. On the list you will find your Plaato Keg listed with a name that is combination of letters and numbers like this; "PLAATO-XXXXX". Click on it to connect

  10. Once connected, return to your Plaato App to continue configuration.

  11. Your device is connected when it passes the Final Check on the configuration. This might take a couple of minutes.

  12. Name your device and click on "Finish" to complete set up πŸŽ‰

Set up Additional Plaato Kegs

  1. Launch your Plaato App

  2. Click on the menu icon in the top right corner of your screen

  3. At the bottom of "My Devices" select "Add new device"

  4. Follow the setup-process as before.

The LEDs will now enter "Sensing-mode" All three Led Lights will breathe together slowly, indicating that the Plaato Keg is connected.

Note: This is a one-time operation. The WiFi credentials are saved and will be used at every power-up - unless you reset.


Related Articles

Did this answer your question?