Steps

  1. In the Plaato app go to the "Debug Tab"

  2. You will see Firmware Version at the bottom of the page

  3. To check for firmware updates for your Plaato Keg click the options menu

  4. Click "Check for Firmware Update"

  5. Within a minute the Plaato Keg will check if there are any firmware updates

  6. If there is an update the Plaato Keg will automatically download the new firmware.

  7. During this, the middle LED will blink asynchronous with the two outer LEDs

keg_firmware_version.jpg
keg_update_firmware.jpg
keg_check_for_firmware.jpg


Did this answer your question?