LED Color + Pattern | Scenario | Visualization |
All LEDs are off | Device is powered off | 
|
Power LED is on | Device is powered on, no vehicle is plugged in | 
|
Charging LED is on and solid | Device is powered on, vehicle is plugged in, and idle | 
|
Charging LED is on and glowing/breathing | Device is powered on, vehicle is plugged in, and drawing power | 
|
Error LED is on | Error has occurred, please contact support or property management |  
|
Connectivity LED is on and solid | Connection found, trying to authenticate connectivity | 
|
Connectivity LED is on and glowing/breathing | Connected to the internet | 
|
All 4 LEDs are blinking | Device is updating | 
|
Turning the device on
Once you activate the device (or the breaker), the startup process begins with the illumination of 4 LED lights, followed by a single beep sound.
The power LED, which is the first one on the left, will light up, indicating the device is receiving power. After a brief interval, the connection LED, which is the first one on the right, should also illuminate.
Connecting to network
Subsequently, the connection LED will stay illuminated until it establishes a connection. Once the connection is established, the LED will begin to blink. Therefore, a blinking connection LED signifies that the device has access to the internet.
The connectivity LED is expected to blink continuously.
Now once a vehicle is connected, the charging process will start.
Charging the car
Once the charger is plugged into a vehicle, the power LED will deactivate and the charging LED (second from the left) will light up.
If the LED remains constantly lit, it implies that a car is connected but either in an idle state, fully charged, or simply not consuming power.
The moment the car begins the charging process, the LED will start glowing.