To open Control Settings, tap the gear icon in the top right corner of the Control tab:
Sounds
Mute sounds
Turns off all sounds.
Outputs will not speak
No bell sound will play
Other sound settings are hidden
Auditory Scan
When active the app will play Output spoken text:
On enable, using the enable voice
On activate, using the activate voice
This is helpful if:
You have low vision or vision loss
You prefer listening instead of looking at the screen
Enable and Activate Voices
The voice used when playing Output spoken text. The enable voice is only available when Auditory Scan is enabled.
The app shows all voices available on your iOS device.
When you select a voice, it will say "Hello" so you know what it sounds like.
To add more voices:
Open Settings on your iPhone or iPad
Tap Accessibility
Tap Spoken Content or Read & Speak
Tap Voices
Choose English
Tap Voice and download new voices
To add a personal voice:
Open Settings on your iPhone or iPad
Tap Accessibility
Tap Personal Voice and follow instructions to create one
Enable Allow Apps to Request to Use
Activation
Activation threshold
The activation threshold sets the command strength level needed to activate an Output. It is displayed as a dashed line on an enabled Output.
When a command strength goes above the dashed line, the Output activates
You can adjust this if Outputs activates too easily or not easily enough
Each command has an activation threshold
Activation speed
Activation speed controls how fast command strength increases.
Use the slow or medium setting for better accuracy, ex: making choices
Use the fast setting when you want quick reaction time, ex: playing a game.
One Switch Scan
One switch scan automatically enables outputs one at a time.
Select Command
When using two commands, this command activates the Output. This setting is hidden when there is only one command.
Enable time
Enable time is how long an Output stays enabled or highlighted.
A longer time gives you more time to activate the Output (because it stays highlighted longer)
A shorter time makes scanning faster (each Output is highlighted for a short amount of time)
Move time
Move time is the pause between Outputs.
It is the short delay:
After one Output is disabled
Before the next Output is enabled
A longer Move time makes scanning slower and easier to follow.
A shorter Move time makes scanning faster (more advanced).
Two Switch Scan
Two Switch Scan uses two commands. One command chooses an Output to enable, and the other activates it. This setting is hidden when there is only one command.
Select Command
This command activates an Output.
Move Command
This command chooses which Output is enabled.
Move time
The pause before the next Output is enabled.
Increase this time to prevent accidental moves, decrease this time to move to the next Output faster.
Outputs
Advanced Outputs
When enabled, experimental Outputs can be added to the Scene, such as T2S Outputs.
T2S Device Firmware
Power on T2S device. Tap "T2S device firmware" to scan for device and optionally update the firmware.