Skip to main content

PS2 - New SD Card Installation

P
Written by Poursteady Support
Updated over 5 months ago

Executive Summary

This SOP outlines the steps required to safely and effectively replace the SD card in a PS2 unit. It includes disassembly of the smart side panel, removal and installation of the SD card, and reassembly of the unit.

THIS SHOULD ONLY BE PERFORMED WHEN INSTRUCTED BY A POURSTEADY TECHNICIAN AND A NEW SD CARD IS PROVIDED BY STEADY EQUIPMENT CORP (DBA POURSTEADY).

A. Process Overview

Purpose: To guide users through replacing an SD card in a PS2 console.
​Business Impact: Enables updates, data replacement, or repair of faulty SD cards.
​When Used: When an SD card needs replacement due to upgrade, corruption, or failure.
​Expected Outcomes: A fully functional PS2 unit with a newly installed SD card.

B. Prerequisites & Preparation

  • Permissions/Access: None required.

  • Tools/Materials:

    • Replacement SD card

    • Screwdriver (compatible with PS2 case screws)

  • Knowledge/Training: Familiarity with basic hardware handling and safety procedures.

  • Environment: Powered-down PS2 unit on a clean, static-free work surface.

C. Step-by-Step Procedures

  1. Copy Recipes

    1. All recipes are saved on your SD card, so a new SD card will not carry over your recipes

    2. Write down your recipes that you wish to recreate
      ​

  2. Power Down the PS2

    • Turn off the PS2 completely using the power switch.
      ​

  3. Access the Smart Side Panel

    • Locate the side of the PS2 opposite the power switch (referred to as the "smart side").

    • Remove the top cap by lifting it off carefully.
      ​

  4. Remove Smart Side Sheet

    • Place your hands on the smart side panel.

    • Squeeze inward and push upward to detach the panel.

    • Set aside the panel to expose internal components.
      ​

  5. Remove the Existing SD Card

    • Locate the SD card within the circuitry.

    • Gently push the SD card until it clicks and pops out.

    • Carefully remove the card and set it aside.
      ​

  6. Install the New SD Card

    • Align the new SD card with the slot, gold pins should be facing outward.

    • Insert it firmly until a click is heard, indicating it is secured.
      ​

  7. Reattach Smart Side Sheet and Cap

    • Reposition the smart side panel and press it into place, ensuring all four corners are secured.

    • Place the top cap back on the unit.

    • Use the screws to secure the top cap in place.
      ​

  8. Power on the Poursteady

    • Turn off the PS2 using the power switch.
      ​

  9. Recalibrate Flowmeter

    • The new SD Card will reset your flowmeter calibration

    • Follow the knowledge base HERE on how to calibrate your flowmeter
      ​

  10. Recreate Recipes

    • Recipes are saved on your previous SD Card

    • See pg 11-12 in the PS2 user manual
      ​

D. Quality Control & Verification

  • Checkpoints:

    • Verify the SD card is properly seated and clicked into place.

    • Ensure side panel and cap are securely attached with no gaps.
      ​

  • Indicators of Error:

    • Improperly/unseated SD card.
      ​

  • Validation:

    • Power on the PS2 to confirm successful boot and SD card recognition.

E. Troubleshooting Guide

Issue

Solution

SD card won't insert fully

Confirm orientation and slot alignment

PS2 doesn't recognize card

Reseat the card or try a known working one

Panel won’t reattach properly

Realign and check for obstructing parts

Did this answer your question?