To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly, then pull it out.
At the back of the paper tray, press the paper lift tray down until it locks.
Adjust the paper length and width guides as illustrated.
Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: Do not load paper above the maximum fill line. Overfilling can cause paper jams.
Adjust the length and width guides to fit the paper.
Slide the tray back into the printer.
