Step 1
Login to website client page: https://privatevpn.com/account/login
Step 2
Proceed to Control Panel: https://privatevpn.com/control-panel
Step 3
Select your preferred VPN location.
for this guide, we will select a Sweden-based server. Click Generate Config.
Step 4
The WireGuard login will be generated below. Take note of the details.
NOTE: Do not use the WireGuard configuration presented on this guide. For sample only.
Step 5
Go to Settings.
Step 6
Under Network, click Add connection and then click Add built-in VPN…
Step 7
Enter the following settings:
Service name: (any name would do)
Provider type: WireGuard
Client IP address: (your WireGuard Address)
NOTE: Do not include the /16
Name servers: 10.35.53.1
Key: I have a key pair
Private key: (your WireGuard PrivateKey)
Public key: (your WireGuard PublicKey)
Preshared key: (leave it blank)
Endpoint: (your WireGuard Endpoint)
Allowed IPs: 0.0.0.0/0
NOTE: Do not include , ::/0
Persistent keepalive Interval: (leave it blank)
Click Connect button.
Connection Success!