By setting the display period and display schedule, you can automatically control when your display appears.
Steps
Setting the Display Period (Start/End Date and Time)
Open the Display Editor and go to the Rules tab.
Turn ON the Display Start/End toggle, then enter the start and end date/time. The display will automatically turn on and off at the specified times. If you leave the toggle OFF, the display will remain active at all times.
Setting the Display Schedule (Days of the Week / Time of Day)
Open the Display Editor and go to the Rules tab.
Turn ON the Display Schedule toggle, then set the days of the week and time range you'd like the display to appear. If you leave the toggle OFF, the display will remain active 24 hours a day, every day.
You can also combine both settings. Use the Display Period to define the overall duration of your campaign, and use the Display Schedule to specify which days and hours within that period the display should appear (e.g., only during weekday business hours).
Configuration Examples (Use Cases)
Use Case 1: Limited-Time Sale Announcement
Settings
Display Start/End: Sale day only (e.g., 2026-10-10 00:00 to 2026-10-10 23:59)
Display Schedule: Off (active 24 hours)
Scenario
When you want to announce a one-day-only event, such as a Black Friday sale or flash sale.
Use Case 2: Weekday-Only Display for a Limited-Time Campaign
Settings
Display Start/End: 2026-09-01 to 2026-09-30
Display Schedule: Mon–Fri, 10:00–19:00 (hidden on weekends)
Scenario
When you want to show a popup for a September-only sale only during weekday business hours—when your store and customer support are operating—and hide it on weekends when inquiries can't be handled.
Note:These settings enable or disable the display automatically, but they do not switch between Live Mode and Draft Mode. Make sure the display is already in Live Mode before the scheduled start time, or it will not appear.