Skip to main content

How to embed a display inside your page

Insert a display into a page element chosen by CSS selector instead of showing it over the page. Plus plan only.

This feature is available on the Plus plan only. It can be used with the Popup and Single image layouts.

You can insert a display directly into an element on your page instead of showing it over the page (In-page embed). This is useful for content that should stay on the page, such as a call-to-action banner below an article or an email signup block on a product page.

Steps

  1. Open the display you want to embed.

  2. In the left menu, open Size & Position.

  3. Under Display mode, select Embedded.

  4. In Target element selector, enter the CSS selector of the element where the display will be inserted (for example, #cta-area or .article-footer).

    Note: If you are not sure, ask the person who built or manages your site.

  5. Under Position, select Start or End.

  6. Save the display and check how it looks on your site with the preview.

Options

Option

Description

Display mode

Popup shows the display over the page. Embedded inserts it into an element on the page.

Target element selector

Enter any valid CSS selector, such as body .myclass or #myid.

Position

Start inserts the display at the beginning of the element. End inserts it at the end (default).

Notes

  • If no element on the page matches the selector, the embedded display is not shown. If you change your site's HTML, check that the selector still matches.

  • Our support team cannot look up selectors on your site.

  • An embedded display is not counted as "currently showing". Even if another display has "Are not currently viewing another display" turned on under Only show to users who, an embedded display being shown does not stop that display.

Did this answer your question?