Login to the Member Area using your PureVPN registered email address and password.

On Subscription tab scroll down to be able to view your VPN credentials.

You will be able to see and copy your VPN credentials.

Note down your PureVPN username and click the Eye icon to make your password visible and use it in the manual configuration.

Click the Settings icon in the upper side panel and then Wired Connected.

Now click Wired Settings.

Click + to add a new connection.

Click VPN in add Network Connection panel.

Then click Point-to-Point Tunneling Protocol (PPTP).

Do the following:

Enter Connection name: New Connection or as per your choice.

Insert the desired server: Please refer to the server address shared in the above note.

Enter your VPN credentials. Here is how you can find your VPN credentials.

Click Advanced.

Check mark the following options:

Click OK.

Click Add.

Your New Connection can now be seen in the Network list.

Select New Connection and turn it ON.

Your dialer is now successfully connected.

Go to Activities and open the Terminal.

Now, you need to install L2TP module. Type the following three commands one by one:

Restart the Network Manager by using the command:

Service NetworkManager restart.

Follow these steps:

Click the Network Connection.

Go to Wired Connected and select Wireless Settings.

Click the + icon to add a VPN connection and select the Layer 2 Tunneling Protocol (L2TP) option.

When a new window opens, complete the fields as below:

Connection name: L2TPConnection.

Insert the desired server: Please refer to the server address shared in the above note.

Enter your VPN credentials. Here is how you can find your VPN credentials.

Click the IPSec Settingsbutton after youre done, and use the following settings:

Click the L2TP PPP Settingsbutton and use the following settings:

Click Ok and then Apply.

Enable your VPN by swiping the toggle.

You are now connected.

Download the OpenVPN Configuration files from this link.

Go to the Terminal window and install OpenVPN Type the following commands one by one:

Now Select the following options:

Click on the + icon to add a VPN connection and select Import from file option to upload an OpenVPN.

Click on the + icon to add a VPN connection and select Import from file option to upload an OpenVPN.

When the new window appears complete the fields as below:

Now go to the Wired Connections option and under VPN Connections click on the newly created PureVPN connection to activate the VPN connection.

You are connected to PureVPN now!

Go to the Activities then search and open the Terminal window.

Now execute the following commands one by one:

Now Select the following options:

Click on the + icon to add a VPN connection and select Point-to-Point Tunneling Protocol (SSTP).

Now enter the following details:

Insert Name as PureVPN

Insert desired server address in Gateway (Here we have used usca.pointtoserver.com)

Enter your VPN credentials. Here is how you can find your VPN credentials.

CA Certificate is set to None

Ignore certificate warnings: Checked

Click on Add.

Now go to the Wired Connections option and under VPN Connections click on Connect button to activate the VPN connection.

You are connected now!

Go to the Activities then search and open the Terminal window.

Now execute the following commands one by one:

Now Select the following options:

Click on the + icon to add a VPN connection and select Point-to-Point Tunneling Protocol (SSTP).

Now enter the following details:

Insert Name as PureVPN

Insert desired server address in Gateway (Here we have used usca.pointtoserver.com)

Enter your VPN credentials. Here is how you can find your VPN credentials.

CA Certificate is set to None

Ignore certificate warnings: Checked

Click on Add.

Now go to the Wired Connections option and under VPN Connections click on Connect button to activate the VPN connection.

You are connected now!

Go to the Activities and search and open the Terminal.

Now run the following commands step by step:

Now Select the following options:

Click the + icon to add a VPN connection and select SSTP option.

Now Enter the following details:

Insert Name as PureVPN

Insert the desired server: Please refer to the server address shared in the above note.

Enter your PureVPN credentials. Here is how you can 👉find your VPN credentials.

CA Certificate is set to None.

Click on Add.

Now, click the Network Connection icon.

Go to VPN and select Connect option to connect to VPN.

You are successfully connected to VPN now!

Click the Turn Off option to disconnect the VPN connection.