Configuring a PureVPN tunnel on your router is a great way to ensure the safety and security of all the devices in your home. This method is especially beneficial if you have devices that don’t have VPN compatibility or you want to protect all the Wi-Fi-connected devices in your home.
In this tutorial, we will show you how to set up a VPN on a TP-Link R6000 VPN Router with Hardware version TL-R6000VPN v4.0 and Firmware version 4.0.3 but first let’s see what are our requirements and recommendations.
Find your VPN credentials for manual configuration
To find your VPN credentials log into the PureVPN Member Area. Click 👉 here to visit Member Area.
Login to the Member Area using your PureVPN registered email address and password.
On Subscription tab scroll down to be able to view your VPN credentials.
You will be able to see and copy your VPN credentials.
Note down your PureVPN username and click the Eye icon to make your password visible and use it in the manual configuration.
How to install DD-WRT firmware on TP-Link
Login to your TP-link router and click Configuration.
Click Advanced.
Click System Tools.
Click Firmware upgrade.
Click Choose File and select the downloaded DD-WRT firmware file.
Click Upgrade.
How to set up OpenVPN on TP-Link AX6600 Wi-Fi 6 Tri-Band Gaming router
Access your Router Panel and click VPN Client on the Left panel.
From VPN Section, click VPN Client then click Add profile.
Description: PureVPN, PureVPN US, PureVPN UK etc (Anything you like)
VPN Type: OpenVPN
Download the required OpenVPN files from here.
Now click Browse.
Username and Password: Enter your PureVPN credentials.
Click Save
ADD the Device by clicking on the ADD button.
Enable the profile you have created.
How to set up OpenVPN on TP-Link AX1800 WiFi 6 router
This article provides step-by-step guidance to set up PureVPN's OpenVPN configuration on a TP-Link AX 1800 Wi-Fi 6 VPN router.
Log in to the router control panel, under the Advanced section select the VPN Client tab. Make sure that VPN Client option is Enable. Then click + Add button to create a VPN profile.
Now enter the profile details as follows:
Click toggle Enable button to activate the VPN profile.
PureVPN is connected on your tp-link router.
How to set up OpenVPN TP-Link Omada Router
To set up OpenVPN on a TP-Link Omada Router, you will need to follow these general steps:
Learn how to set up OpenVPN on your TP-Link Omada router with this comprehensive step-by-step tutorial. Enhance your network security and privacy by configuring OpenVPN, allowing secure remote access to your local network from anywhere.
Start by visiting the PureVPN support center to download the PureVPN OpenVPN Configuration files for your router. Extract the files after downloading from this link.
Next, log in to your router's control panel. Look for the VPN section and select the OpenVPN tab.
Within the OpenVPN tab, locate and click on the 'OpenVPN Client' option. Then, click on the '+ Add' button to create a new OpenVPN profile.
Fill in the profile details as instructed below:
Client Name: PureVPN
Mode: CA+PWD
Enter your PureVPN credentials. Here is how you can find your VPN credentials.
Service Port: Use 80 for TCP or 1194 for UDP
Remote Server: Choose your desired OpenVPN server from the server list
provided by PureVPN. Convert the server name into an IP address. You can find the server list here.
Local Network: Enter your local Network IP or Gateway IP
WAN: WAN
File Path: Upload the OpenVPN file you downloaded in Step 1
Status: Enabled
Click OK to save the profile
Congratulations! The PureVPN OpenVPN connection is now activated on your TP-Link Omada router.
