The first place to start in Fleet is the Trailers tab. This is where your trailers are set up for tracking and maintenance. It does not add trailers for rent or make them bookable on your website.
There are two parts: getting your trailers into Fleet, then linking a GPS tracker to each one.
Before you start: Your GPS account (RideDog or LoneStar) must be connected to Fleet first. Until it is, you won't be able to link trackers to your trailers.
đ Part One: Get your trailers into Fleet
V4 (the new system)
Your trailers are pulled into Fleet automatically, with their names. Do not add them manually.
Trailer missing from Fleet? The Fleet page says "Don't see one of your trailers? Open it in RentFlow and hit Save." Here's how to do that in your admin console:
Go to the admin console at admin.rentflowsolutions.org.
Click Trailers.
Click the trailer that's missing.
Scroll to the bottom of the trailer's card and click Save. You don't need to change anything.
Repeat for every trailer that's missing.
Go back to the Trailers tab in Fleet and refresh the page. Your trailers will now show there, ready for Part Two.
V3 (the original system)
Add each trailer manually, using its value from the CRM:
In the CRM, click Settings.
Click Custom Values.
Open the Folders section.
Click Unit Names.
Find your trailer and copy its value.
Go back to the Trailers tab in Fleet, click Add Trailer, and paste the value into the Trailer Name field.
đĄ Pro Tip
Copy the value, not the name. They should match, but if they do not, the value is the only thing the system reads.
đ Part Two: Link a tracker to each trailer (V3 and V4)
Each trailer in the Trailers tab shows whether it has GPS or not.
On the trailer, click the Connect tracker button. This is used for both RideDog and LoneStar trackers.
Open the Select a tracker... dropdown. You will see a list of your GPS units, using the names you gave them in your own tracker account. The dropdown also tells you if a tracker is already on another trailer.
Choose the tracker that belongs on that trailer, then click Connect.
đ Linking rules
One tracker per trailer. A tracker cannot be linked to more than one trailer.
Moving a tracker to a different trailer? Unlink it from the original trailer first, then link it to the new one.
Why does this matter? Miles, maintenance alerts and service logs are tied to the trailer, not the tracker. That way, if you physically move a tracker from one trailer to another, your maintenance history stays accurate and attached to the right trailer.
No GPS tracker? You can still use Fleet with time-based maintenance reminders. See Step 2: Maintenance Alerts.
