Skip to main content

📍 How to Fix Incorrect Addresses in Automated Customer Messages - v3

Learn how/where to change the address the customer gets for text messages.

This article is for V3 (the original system) only. On V4 (the new system), change the address and lock code in the admin console under Trailers: open the trailer, then the Pick-up & access section. Do not use the Rental Location custom value to change your address on V4.

  1. ⚠️ Before you change anything
    If your phone system verification is still in progress, it is extremely important that you do not change the address on your website or inside your system yourself. The federal verification process uses that address for compliance verification, and changing it during review can cause the verification to fail and require the entire process to be restarted.


🛠️ Option 1: Contact Support

  1. 📞 Reach out to RentFlow Support
    If your phone system has not completed verification or is currently experiencing verification-related errors, contact us directly so we can safely assist with the address update.


⚙️ Option 2: Update the Address Yourself

Most systems use one Rental Location value for every trailer. Some are set up with a separate pickup address value for each trailer instead.

  1. 🌐 Go to Custom Values
    Navigate to Settings → Custom Values.

  2. 🔍 Find the address
    Search for Location and find the custom value labeled Rental Location. If your system uses a separate value per trailer, find the pickup address value for that trailer instead.

  3. ✏️ Edit the address
    Click the three dots → Edit, then replace the existing address with the correct one.

  4. 💾 Save your changes
    Click Update to apply the new address.

⚠️ Changing Rental Location changes the address for ALL of your trailers and on your website. If you use a separate value per trailer, changing one only updates that trailer, so repeat for every trailer that needs it.

💡 Pro Tip
This does not affect the booking confirmation email address, which must be updated separately.

Did this answer your question?