When trips begin running behind schedule, having an estimated time of arrival (ETA) can help dispatchers anticipate delays and better communicate arrival times.
RoutingBox allows you to display calculated ETAs directly on your Dispatch screen.
Follow the steps below to enable this feature.
Step 1: Enable Automatic Late Detection
Navigate to Settings → System Settings.
Use the search field in the upper-right corner to search for
AUTO_LATE_DETECTION.Locate the
AUTO_LATE_DETECTIONsetting and verify that its value is set to 1.If the value is already set to 1, no changes are needed.
If the value is different, click the value cell and change it to 1.
Click Update to save your changes.
Step 2: Display ETAs on the Dispatch Screen
1. Navigate to your Dispatch screen.
2. Click the gear icon to open the Dispatch settings.
3. Find the Show ETA option and toggle it on.
4. Click Save to apply your changes.
Note: After adjusting your settings to allow for ETA's to calculate, you may need to wait about 15 minutes to see ETA's appear on your Dispatch screen.
Step 3: View ETAs
Once ETAs are available, they will appear on your Dispatch screen alongside the applicable trips.
If a trip is running late, a red triangle with an exclamation mark will appear next to the affected stop.
To view the estimated arrival time, simply hover over the red warning icon. RoutingBox will display the calculated ETA for that stop.
This allows dispatchers to quickly identify potential delays and see when a trip is expected to arrive.






