To verify that the Sid pixel is installed correctly in your Google Tag Manager, please follow these steps:

Step 1: Follow our guide

Before attempting to verify the installation of the Sid pixel, it is important to make sure that you have followed our guide for implementing it using Google Tag Manager.

This guide provides step-by-step instructions and screenshots to help you easily set up the pixel on your website. You can access the guide here: Guide to implement Sid's pixel using Google Tag Manager.

Step 2: Check the GTM container

Once you have followed our guide and implemented the Sid pixel using GTM, the next step is to check your GTM container. This is where the Sid pixel code should be present.

To do this, log in to your GTM account and navigate to the "Tags" section. Here, you should see the Sid pixel code listed as one of your tags.

Step 3: Test the pixel

To ensure that the Sid pixel is working correctly, you can use the GTM preview mode to test it. This will allow you to see if the pixel is firing correctly on your website.

To do this, click on the "Preview" button in the top right corner of your GTM account. Then, navigate to your website and perform the actions that should trigger the pixel. If the pixel is installed correctly, you should see it firing in the GTM preview mode.

If you have followed these steps and are still experiencing issues with the Sid pixel, please reach out to our support team for further assistance. We are always happy to help you troubleshoot and ensure that the pixel is installed correctly on your website.