Welcome to the Hand Warmer Pro User Guide, your ultimate resource for staying cozy and comfortable!
We're here to guide you through every step of using your Hand Warmer Pro.
To make things even more convenient, we've prepared a video tutorial that brings the instructions to life. Check it out below!
Quick tip - to adjust the sound, select the speaker icon. To view the video in full screen, click the button with four arrows at the bottom of the video.
Here are the instructions for using the Hand Warmer Pro:
Double-click the power button:
This will turn on the hand warmer and activate the blue indicator light, which shows the power level of the unit.
Press and hold the power button for 3 seconds:
This will initiate the heating process. You will notice a red light coming on to indicate the current heat level.
It will take approximately 5 minutes for the unit to reach its full warming capacity.
Tap the power button to cycle through heat settings:
Each tap will switch to the next heat setting. Make sure to pause for at least 2 seconds between each switch.
The red light will indicate the current heat setting.
1 Red Light: Low Heat (95°F - 104°F)
2 Red Lights: Medium Heat (104°F - 118°F)
3 Red Lights: High Heat (118°F - 130°F)
Use with caution on the highest heat setting:
The highest heat setting (3 red lights) produces the most warmth, so it's advised to exercise caution (it may cause a burn if it's directly against your skin for too long).
The black plastic strip around the Hand Warmer does not heat up, hold the unit with your fingers in this area if the heat is too much.
To turn off the hand warmer:
Press and hold the power button for a full 4 seconds. This will power down the unit.
Wait for the unit to shut off:
After turning off the hand warmer, give it 6-10 seconds to completely power down. All indicator lights will turn off.
Stay warm and enjoy your adventures with the Hand Warmer Pro! Thank you for choosing Survival Frog. 🐸