Note: This only works on the TetherBox Pico and older TetherBox 5 and 10 units.

1) Open the TetherBox Network tab and toggle activate Access Point button. If TetherBox has an internal wi-fi module you will be able to scan Access Point with your phone or laptop. The SSID of the access point will be named <tetherbox_serial-TetherBox-name>, password will be assigned automatically.

2) If you would like to change the password or TetherBox-name please click the edit TetherBox button and fill in the appropriate fields.
​

3) Press the save button and reactivate virtual Access Point with a new config by toggling activate Access Point control button