All Collections
Camera Specific
PTZ Cameras Setup Guide (for use with TetherX)
PTZ Cameras Setup Guide (for use with TetherX)

How to setup PTZ cameras to work with TetherX

Roman Gaufman avatar
Written by Roman Gaufman
Updated over a week ago

1. Once your camera is online TetherX should automatically detect it on your network and prompt you to enter the password. Once you have done this please follow the following steps to set up the live view and recording.

2. To enable PTZ functions through TetherX please find the camera you have added into TetherX - https://my.timeline.is/cameras

  • Press the "Edit" button on your camera page:

  • Go to the Advanced tab and check the PTZ checkbox to enable the controller:

3. Click the "Update Camera" button to save the changes:

4. Go to your live view page and find the camera on your timeline:

5. View your camera as a single window and the PTZ functions will show up in the top left-hand corner. Use the controller to move the camera.

Controlling PTZ on mobile devices

1. Go to the Live view tab and select your PTZ camera.

2. Open full-screen mode for this camera.

3. Double tap on the screen to enable PTZ controls.

Did this answer your question?