How to Connect Your VapeTM Machine to Wi-Fi

Unbox and Power On the Machine
1. Remove the keys from the cord after unboxing your wall-mount machine.
2. Plug the machine into a power outlet.
3. If the screen doesn’t light up immediately, switch ON the power switch located inside the machine.
Identify the Two Antennas
1. Inside the box, you’ll find two antennas:
  1. Wi-Fi Antenna — large, circular, and heavy rod.
  2. Nayax Antenna — Skinner antenna pole (you should screw this on also)
Install the Wi-Fi Antenna
1. The antenna is installed at the top of the machine. You will see the mounting bases inside the machine in the top right. You may need to move them a tiny bit so that they line up with the holes on top.
2. Screw the Wi antenna clockwise until it’s snug.
Connect the Machine to Wi-Fi
1. Hold down the upper right hand corner of the machine to initiate the admin password box
2. Enter the admin password. To Change Your Password Follow This Guide.
  PASSWORD: Vape TM (case sensitive with a space)
3. Go to 'Equipment Configuration'
4. Enable the 'Navigation Bar' toggle and submit.
5. Swipe up on the screen to unlock the interface.
6. Tap the circle icon, then select Settings → Network & Internet → Wi-Fi.
7. Select your Wi-Fi network and enter the password.
8. Wait a few seconds for the connection to complete.

Unbox and Power On the Machine