SecureNet Setup Options:

CSRDS will post information to the SecureNet software creating an XML file to be monitored by the SecureNet software or as a UDP link to the SecureNet Software. To configure CSRDS to send to Secure Net:

In CSRDS select Properties from the Tools Menu and select the HD/IP Output Tab.

To create a file for SecureNet:

  1. Select Use Template for the Output Format section
  2. Select the SecureNet.txt template 
  3. In the Save To File area enter the path and file name of the file CSRDS will create for SecureNet. It needs to be located on the C: drive of the computer running our DCS software

Example:

To configure CSRDS for a UDP feed to SecureNet:

  1. Select Use Template for the Output Format section
  2. Enter the IP to the PC running the DCS softwate. If on the same computer use localhost
  3. Select a Port Number and send it to SecureNet to configure the DCS software
  4. Select the SecureNet.txt template 
  5. Leave the Save To File area “as is” to create a copy of the data set to SecureNet. Using the StreamTemplate option in the Templates menu of CSRDS we can verify what was sent to SecureNet

Sample Configuration

IP and Port toPC running the DCS Software. If same computer running CSRDS use localhost  

 

Did this answer your question?