ENHANCEMENTS
Document Generation
Customizable document download by language and unit preference:
Users can now generate and download documents with options to customize language and units of measurement. This enhancement allows users to select their preferred format at the time of download - after configuring a product or adding it to a project - ensuring documents align with local standards and user needs.
Life Cycle Cost (LCC) Report
Life Cycle Cost (LCC) report is now available in Solver External:
Users can now access and fill in data for the Life Cycle Cost (LCC) report directly in Solver. Input fields are available under the LCC details section for relevant product configurations. The user guide will be updated shortly to reflect this enhancement.
LCC report integrated into document generation:
A new option is available in the customized document generation panel, allowing users to include the LCC report in the final document output by selecting "Life Cycle Cost Calculator Report" under the customization section. The user guide will be updated shortly to reflect this enhancement.
Goulds Water Technology (GWT) Products
e-MP Series:
Impeller trimming options enhanced: The impeller trimming functionality for the e-MP series has been enhanced in the Solver application, allowing for more accurate and flexible configuration based on performance requirements.
Lowara Products
e-MP Series:
Impeller trimming options enhanced: The impeller trimming functionality for the e-MP series has been enhanced in the Solver application, allowing for more accurate and flexible configuration based on performance requirements.
PRODUCT OFFERINGS
Lowara Products
GHVX Series:
GHV X Smart Controller now available (Central & North Europe).
PLATFORM MAINTENANCE
Goulds Water Technology (GWT) Products
e-SVI & e-SVX Series:
Updated dimensions: The dimensions for all models in the e-SVI and e-SVX series have been reviewed and corrected. These are now visible under each model’s ‘Dimensions’ tab in Solver.
Flange dimension for model 22SV updated: For the 22SV model in the e-SVX series, the flange size has been updated to 2", in alignment with the latest official brochure.
GA Series (Grinder Pumps):
Explosion-proof option removed: The explosion-proof configuration option has been disabled for 1GA and 2GA grinder pump models, as these units are being phased out and are no longer available for selection.
NPE / ICS Series:
Series name change: The product series previously listed as “NPE/NPE-F” has been renamed to “NPE” for consistency and clarity.
Series name change: The “ICS/ICSF” designation has been standardized to “ICS” across all relevant entries.
e-SHX Series:
Pricing update: The pricing for the 25SHX06F model in the e-SHX series has been revised to reflect the correct value based on the current configuration and packaging standards.
e-MT Series:
Nomenclature generation corrected for reduced impeller options: Solver now correctly generates model names for eMT packages that include reduced impeller configurations. Previously, these models displayed incomplete or incorrect nomenclature.
Lowara Products
CA Series:
Dimension & Seal Fixes: Inlet/outlet dimension mismatch for CA200/35 and CA200/55 fixed.
Seal assignment now based on material:
AISI 304 → VBPGF
AISI 316 → VBEGG
DOMO Series:
Material update: Impeller material updated to Stainless Steel in configuration.
e-IXP / e-IXP ATEX / e-NSC Series:
Seal Type Restriction: For Rigid Coupled installation, only “Single mechanical seal without shaft sleeve” is available.
e-LNT Series:
Motor Sizing Corrections:
LNTE 100-160 model (50 Hz, 2-pole, 158 mm curve, close-coupled): the motor has been fixed to 15 kW, with no alternative size selection available to ensure accurate configuration.
LNT 80-160: 2900rpm Single Mode was incorrectly assigned 7.5 kW — now corrected to 5.5 kW.
e-MPA / e-MPD / e-MPR / e-MPV Series:
PN100 flange only selectable when casing pressure is 100 bar.
PN100 flange selection issue for MPD125B/04A/BF fixed.
Austenitic Stainless Steel (ASTM CF8M) removed for sizes 150A and 150B.
316 Stainless Steel casing option removed for size 150 (not offered).
Pricing for Motor and Coupling Guard now correctly displayed for MPA 40.2 (4-stage, 2950 RPM).
e-MPD Series:
PN40 suction flange selection now enabled for MPD100A (10-stage) model: A restriction that prevented users from selecting the PN40 suction flange for the MPD100A 10-stage pump has been resolved. Users can now correctly select PN40 for pricing and quoting.
e-NSC Series:
Motor Sizing Corrections:
NSCF 100-316/1320/L25VCC4 corrected to 132 kW for curve 286mm.
e-SH Series:
Motor Sizing Corrections:
Model 50-160: the default 4 kW motor has been corrected to 5.5 kW reflect accurate sizing based on the technical specifications.
50-125 series (Frame Mounted + WEG motor): 22 kW was incorrectly assigned for 114 mm curve — now fixed to 2.2 kW. Motor allocation reverted to match official technical brochure.
40-160 (152 mm curve, rigid coupled): 4 kW motor removed — only 3 kW available.
40-200 (190 mm curve, close coupled): 5.5 kW motor now directly available; others removed.
ESHS 50-125: 131mm curve Impeller now correctly linked to 4 kW instead of 5.5 kW.
80-160 (close coupled, 50 Hz, 2-pole, 169 mm curve): 15 kW motor removed — only 11 kW available.
e-XC Series:
Accessory Update: Witnessed Test accessory for 200 kW motors now available.
GHVX Series:
Configuration fixes: C1/Additional Card options removed from configuration.
Z Series:
Accessory addition: Support clamps, threaded flanges, and cable connections are now available.