First of all, you should know that the maximum area for fabric printing without seam splicing depends on the fabric and the products to be printed.
For the 115 g/m² flag fabric, it cannot be larger than 3.10 metres in width and height at the same time. This means: If the requested size is 4x4m we will not be able to print on a single piece. We will be able to do it if the piece is 4x3m.
For 130 g/m² satin fabric, it may not exceed 1.45 metres in both width and height.
For the waterproof 250 g/m² fabric, the printing of the fabric may not exceed a width and height of 2.15 metres in both sizes.
Exceptions: We will be able to make prints for 3x3m and 2,5x2,5m waterproof fabrics in an extraordinary way without any seam in between.
If you are still in doubt, you can check on the distributor's portal if we can print in the dimensions you want. To do this, choose the product and enter the desired measurements. If it can be done in a single piece, no warning will appear, otherwise, check the warning that the platform reports to you.
Remember:
This information is orientative, for production reasons the maximum print size of our products may be limited at certain times.