Skip to main content

Why can't I publish my page?

Why Publish is greyed out, missing or asks for a plan in Atlas Web, what each question, notice and error in the publish panel means, and how to fix it, from the Atlas page builder switch to other stores, a store Atlas can't reach and slow publishes.

Written by Grace

The most common reason is the Atlas page builder switch: if Atlas's app embed is off in the theme you picked, Publish stays greyed out until you turn the switch on. Other reasons are no plan on your account yet, a copy that needs you to tick Publish this copy in place of that page, no connected store, a page built for another of your stores, and a store Atlas Web can't reach. Publishing never needs credits. If you clicked Publish and it failed, the red message just above the Publish button says why: find it in the tables below.

In this article:


If you can't find Publish

Publish, at the top right of the Store Builder, opens the publish panel. It shows only once the page is finished: for a store or product page, once the finished page has replaced the building view, and for a pre-sell page, once the written page has played in. On a pre-sell page, and on a store or product page until its editor is ready, the same button reads Import and edit in Shopify. On a phone, only its upload icon shows. To publish a page you built earlier, open it from Pages.


If Publish asks you to choose a plan

Publishing uses no credits, but your account needs a plan to publish: a paid plan, the Free plan with a card saved, or a credit pack you bought. A page you've already published to a store can be published there again without one. Without one, a first publish shows:

What you see

What to do

Publish opens “Choose a plan to publish”, with “Your page is saved as a draft.”, instead of the publish panel

Click Continue free to save a card for the Free plan (the card isn't charged), or See plans to pick a paid plan. After Stripe, Atlas takes you back to your page with the publish panel open. Back to my page goes back without a plan, and the page stays a draft.

“Choose a plan to publish. Your page is saved as a draft.” in the panel, with Choose a plan

Your account had no plan when you clicked Publish. Click Choose a plan, which opens the same page.


Why is Publish greyed out?

What you see

Why

What to do

The Atlas page builder switch, with “Turn on to publish. This adds Atlas to your theme’s app embeds.”

Store and product pages need Atlas's app embed on in the theme, and it's off in the theme you picked.

Turn on the switch. If you see “We couldn’t turn it on. Try again.” twice, click Open theme editor, turn on Atlas Page Builder, click Save in the theme editor, then reload Atlas and open the panel again.

“Checking app embed status…” on the button

Atlas is checking the theme you picked.

Wait a moment.

A box to tick, Publish this copy in place of that page or Publish this copy in place of those pages

The page is a copy, and publishing it replaces the original's page on that theme.

Tick the box if that's what you want. See How to publish a page to your store.

“Publishing…”

A publish is running.

Wait: it takes about a minute.


If the panel shows a notice instead of Publish

Notice

Why

What to do

“No store connected” with “Connect your Shopify store to start publishing.”

No Shopify store is connected to your account.

Click Connect store, enter your store's address and approve Atlas on Shopify. You come back to the page with the panel open and “Store connected”. See How to connect your Shopify store.

“No store connected” with a connection error, such as “That connection link expired. Try again.”

Connecting the store didn't finish.

Click Connect store and try again.

“Built for another store” with the store's name, for example “Reconnect Aurora Home to publish this page.”

The page was built on one of another store's products, and Atlas is working on a different store now. A page built on a store's product can only be published to that store.

Connect that store again: Atlas works on the store you connected most recently. If the store is still in your list of stores, disconnect it first, then connect it. See How to connect your Shopify store.

“This page is a sample”

The page you have open isn't one of your own builds, so it can't be published.

Open your page from Pages, or build one from Home.

“We can’t reach your store” with “It may be closed, or Atlas was removed from it. Reconnect it to publish.”

Your store is still connected to Atlas Web, but Shopify isn't letting Atlas into it, for example because the store is closed or the Atlas app was removed from it.

Click Reconnect store and approve Atlas on Shopify. See How to connect your Shopify store.

“Couldn’t load your themes” with “Try again in a moment.”

Atlas couldn't read your store's themes.

Close the panel and open it again in a moment.

“Couldn’t load your themes” with “Your store has no theme Atlas can import into.”

Your store has no live theme or finished unpublished theme Atlas can use.

Check your themes in Shopify, under Online Store → Themes.

“Checking this page” and “Loading your themes” show while the panel loads.


If Atlas asks before publishing

On a store or product page, Publish can ask a question first. Nothing is published until you answer:

What you see

Why

What to do

“Publishing switches this product to the new page in every theme. If you pick a theme that isn’t live, your live store shows its default product page until you publish that theme.”

You picked a theme that isn't your live theme.

Click Publish anyway, or Cancel and pick your live theme.

“Switch this product’s page?”

The product was switched to another template in Shopify since this page was last published to that theme.

Click Switch and publish, or Cancel to leave the product as it is.

“Replace changes made in Shopify?”

The page was changed in Shopify's theme editor since it was last published to that theme.

Click Replace and publish, or Cancel to keep those changes. Apps you added stay either way.

The answer buttons are greyed out while another publish of the same page is running. See How to publish a page to your store.


If publishing a store or product page fails

Message

Why

What to do

“This page is already being imported. Try again in a few minutes.”

An earlier publish of this page is still running, maybe from another tab.

Wait a few minutes, then check Pages: the page shows Live once the earlier publish is done.

“Preparing your page. Try again in a moment.”

Atlas is still preparing the page for publishing. For a full store, it's usually the home page.

Wait a minute, then click Publish again.

“This page changed while you were publishing. Try again.”

The page got a new version as you clicked Publish, for example from a change made in another tab.

Click Publish again.

“Turn on the Atlas page builder in this theme first.”

Atlas's app embed is off in the theme you picked.

Turn on the Atlas page builder switch in the panel, then publish.

“We couldn’t reach your store. Try again.”

Shopify didn't answer Atlas in time.

Try again. If the panel then shows “We can’t reach your store”, see the notices above.

“This theme changed while publishing. Pick it again and retry.”

The theme was published or unpublished in Shopify while Atlas was publishing to it.

Pick the theme again and click Publish.

“Atlas couldn’t find that theme in your store. Pick a theme and try again.” or “Pick one of your store’s themes.”

The theme you picked isn't available any more, for example because it was deleted in Shopify since the panel opened.

Reload the page, open the panel and pick a theme again.

“Atlas couldn’t find this page’s product in your store.”

The product the page was built for isn't in your store any more.

Contact support with the page's name.

“Atlas couldn’t switch the product to the new page. Try again.”

The page is in your theme, but the product wasn't switched to it.

Click Publish again.

“Atlas couldn’t upload the page to your theme. Try again.”

The page's files didn't reach your theme.

Click Publish again. If it happens every time on one theme, see below.

“Atlas couldn’t back up your home page, so nothing was changed. Try again.”

Publishing a full store backs up the theme's home page first, and the backup couldn't be saved. Your home page is as it was.

Click Publish again.

“This theme already has a different copy of this page’s files. Publish to another theme or contact support.”

The theme already holds files with this page's names that are different from the page's own.

Pick another theme, or contact support with the page's name and the theme.

“Atlas couldn’t prepare this page for your theme. Contact support.”

Atlas couldn't turn the page into theme files.

Contact support with the page's name.

“The home page couldn’t be prepared for the editor. Contact support to publish this store.”

Atlas couldn't prepare a full store's home page, and you've already changed the store with Atlas.

Contact support with the page's name.

“This publish waited too long. Try again.”

The publish didn't start within 15 minutes.

Click Publish again.

“This page is still being built.”

The build hasn't finished.

Wait for the page to show Draft in Pages, then publish.

“This page was built for another store. Reconnect that store to publish it.”

The page belongs to another of your stores.

See “Built for another store” above.

“This page can’t be imported yet.”

This page can't be published.

Contact support with the page's name.

“The import is taking longer than usual. Check your theme in Shopify.”

Atlas stopped waiting after 5 minutes, but the publish is still running.

See the last section.

“Something went wrong. Try again.”

Atlas couldn't start or finish the publish. This also covers a photo you put on the page in the editor that Shopify wouldn't take, and, for a page built from a product link, a product Atlas couldn't add to your store.

Click Publish again: for a page built from a link, Atlas picks up where it stopped. If it keeps happening, contact support with the page's name.

If you published with Import and edit in Shopify

A store or product page published before its editor was ready can also show these:

Message

Why

What to do

“The import didn’t finish. Try again.”

The publish stopped partway. This also covers a home page that couldn't be backed up, in which case Atlas left your home page as it was.

Click Publish again.

“Couldn’t add the product to your store. Try again.”

The page was built from a product link, and Atlas couldn't create the product on your store.

Click Publish again: Atlas picks up where it stopped and doesn't create a second product.

“Couldn’t import the page. Try again.”

Atlas couldn't start the publish.

Try again in a few minutes. If it keeps happening, check the store is still connected: Settings → Integrations → Manage.

If “Atlas couldn’t upload the page to your theme. Try again.” or “The import didn’t finish. Try again.” comes back every time on one theme, the theme may be full: Shopify limits how many templates and blocks a theme can hold, and Atlas's files count toward those limits. Publish to another theme, and contact support to make room in this one.


If publishing a pre-sell page fails

Message

Why

What to do

“Atlas can’t edit this store’s themes, so the page wasn’t added. Try a different theme, or contact support.”

Shopify didn't let Atlas write the page's files into this theme.

Pick another theme and publish again. If it happens on every theme, contact support.

“Couldn’t add the product to your store. Try again.”

The page is about a product link, and Atlas couldn't create the product on your store.

Click Publish again: Atlas picks up where it stopped.

“This page is already being published. Try again in a few minutes.”

An earlier publish of this page is still running.

Wait a few minutes, then check Pages.

“This page is still being written.”

The page isn't written yet.

Wait for the page to show Draft in Pages, then publish.

“Connect your store to publish this page.”

No store is connected.

Connect your store, then publish again.

“This page was built for another store. Reconnect that store to publish it.”

The page belongs to another of your stores.

See “Built for another store” above.

“Pick one of your store’s themes.”

The theme you picked isn't available any more.

Reload the page, open the panel and pick a theme again.

“The publish didn’t finish. Try again.”

The publish stopped partway.

Click Publish again.

“Couldn’t publish the page. Try again.”

Atlas couldn't start the publish.

Try again.

A pre-sell page belongs to the store that was connected when you built it. One built from a product link with no store connected belongs to the first store you publish it to, and can only be published there after that.


If publishing is taking longer than usual

Publishing takes about a minute. After 5 minutes, the panel stops waiting and shows “The import is taking longer than usual. Check your theme in Shopify.”, or for a pre-sell page “Publishing is taking longer than usual. Check your store’s pages in Shopify.” The publish carries on:

  1. Wait a few minutes.

  2. Check Pages: the page shows Live once it's published.

  3. Or check in Shopify: your theme for a store or product page, or Online Store → Pages for a pre-sell page.

If a publish still hasn't finished after an hour, Atlas treats it as failed. Publish the page again.

If it still isn’t working, open the menu from your profile at the bottom of the sidebar and choose Chat with support, or email support@helloatlas.io.

Did this answer your question?