Skip to main content

How to publish a page to your store

How to publish a page from Atlas Web into a theme of your Shopify store: which theme to pick, the Atlas page builder switch, the plan you need, what Atlas asks first, publishing a copy or publishing again, and the inactive notice in the theme editor.

Written by Grace

Publishing puts a page you built, with the changes you made to it with Atlas, into a theme of your connected Shopify store. Publishing uses no credits, but your account needs a plan to publish: a paid plan, the Free plan with a card saved, or a credit pack you bought. Store and product pages need Atlas's app embed on in that theme, and Atlas Web turns it on for you with one switch. Pre-sell pages are added to your store as new pages and don't need the app embed. You need a connected store: if none is connected, the publish panel offers Connect store. See How to connect your Shopify store.

In this article:


How to publish a page

  1. Open the page. It's on screen when a build finishes; to publish one you built earlier, open it from Pages.

  2. Click Publish at the top right. On a phone only its upload icon shows. The Publish to Shopify panel opens, with “Import into” and your store's name under its title. If your account has no plan yet, “Choose a plan to publish” opens instead: see "What you need to publish" below. On a pre-sell page, and on a store or product page whose editor Atlas is still preparing, the same button reads Import and edit in Shopify: see "If the button reads Import and edit in Shopify" below.

  3. Check Pages to be published: “1 Product page” for a product page, “1 Home page, 1 Product page” for a full store, or “1 Listicle” or “1 Advertorial” for a pre-sell page.

  4. Under Publishing to:, pick the theme. It starts on your live theme, marked (Live). The next section explains the choice.

  5. If the Atlas page builder switch shows, with “Turn on to publish. This adds Atlas to your theme’s app embeds.”, turn it on. Publish stays greyed out until it's on, and reads “Checking app embed status…” while Atlas checks the theme.

  6. Click Publish. On a store or product page, if the theme you picked isn't your live theme, Atlas asks first: “Publishing switches this product to the new page in every theme. If you pick a theme that isn’t live, your live store shows its default product page until you publish that theme.” Click Publish anyway, or Cancel to pick another theme.

  7. The panel shows the theme's name, for example “Publishing to Dawn. This takes about a minute.”, and stays open until the publish ends.

  8. When you see, for example, “Published version 3 to Dawn”, the page is in that theme. On your live theme, “It’s live on your store now.” shows under it. Click View page to open the product's page on your store, or View store for a full store, which opens its home page. On a theme that isn't live, it opens a preview of that theme. Open in theme customizer opens Shopify's theme editor on the page.

A pre-sell page ends with “Page published” instead. Click Open in theme editor to see the page in your theme.

If the product isn't on your Online Store, shoppers can't open its page yet: the panel shows “Not visible yet. Add the product to your online store to show this page.”, and on your live theme “Your page is published, but shoppers can’t see this product yet.” Click Show on online store: Atlas adds the product to your Online Store sales channel and changes nothing else. If that fails, you see “Atlas couldn’t add the product to your online store. Try again.”

Once it's published, the top bar shows Published and the page shows Live in Pages. The page's name in the top bar then opens Published versions, with each version you've published and the theme it went to.


Choosing a theme

The Publishing to: picker lists your live theme, marked (Live) after its name, and your unpublished themes, newest first. A theme Shopify is still processing isn't listed until it's ready.

The line under the picker says what publishing does on the theme you picked:

Page

Theme

What you see

Product page

Any

“This will replace product pages with the same products on the selected theme.”

Full store

Any

“This will replace the current home page and product pages with the same products on the selected theme.”

Pre-sell page

Live theme

“This adds a new page to your store.”

Pre-sell page

Unpublished theme

“This adds a new page to your store. Until this theme is live, shoppers see the page without its design.”

⚠️ Publishing a store or product page switches its product to the new page in every theme, not only the one you pick. On an unpublished theme, your live store then shows the product's default product page until you publish that theme. To check a page before customers see it, look at it in Atlas on desktop and phone first.


Publishing a copy of a page

A copy you made with Duplicate in Pages takes the original's place when you publish it, if the original was a store or a product page built on one of your store's products. The publish panel shows a note and a box to tick:

  • A product page copy: “This is a copy. On this theme it takes the place of the page its product shows now. That page stays in your theme, so you can switch back in Shopify.” Tick Publish this copy in place of that page.

  • A store copy: “This is a copy. On this theme it takes the place of the home page and of the page its product shows now. Atlas backs up the home page first, and the product’s page stays in your theme, so you can switch back in Shopify.” Tick Publish this copy in place of those pages.

Publish stays greyed out until the box is ticked. A copy of a pre-sell page, or of a page built from a product link, replaces nothing, so it has no box. A copy of a page built from a product link adds a product of its own to your store when you publish it.


What publishing changes in your theme

  • Atlas adds the page's files and a product template to the theme you picked. Publishing the page to that theme again updates the same template.

  • Your product switches to the new page in every theme. Atlas doesn't change which sales channels it's on.

  • The Atlas Bundler block goes above the add-to-cart button, so a live bundle on the product shows there. See The bundle on pages you publish from Atlas Web.

  • A full store also replaces the theme's home page. Atlas keeps a backup first.

  • A page built from a product link adds the product to your store at its first publish there, on all your sales channels, with the link's price, or $4.97 if the link shows none, and a compare-at price 3 times the price.

  • A pre-sell page is a new page of your store. It replaces nothing.


What you need to publish

Publishing uses no credits: not a page's first publish, not a publish to another theme or store, and not a copy made with Duplicate. Your account does need a plan to publish: a paid plan, the Free plan with a card saved, or a credit pack you bought. A page you've already published to a store can be published there again without one.

If your account has none of these, clicking Publish opens “Choose a plan to publish”, with “Your page is saved as a draft.” under it:

  • Continue free opens Stripe to save a card for the Free plan. The card isn't charged.

  • See plans shows the paid plans.

  • Back to my page takes you back to your page, still a draft, without a plan.

After Stripe you see “Saving your card…” or “Confirming your payment…”, then “Taking you back to your page…”, and your page opens again with the publish panel open. See Plans and credits.

If the panel was already open, a publish can also stop with “Choose a plan to publish. Your page is saved as a draft.” and Choose a plan, which opens the same page.


If the button reads Import and edit in Shopify

The button at the top right reads Import and edit in Shopify instead of Publish:

  • On a pre-sell page, always. Pre-sell pages can't be edited with Atlas: they're published as written, and the panel ends with “Page published” and Open in theme editor.

  • On a store or product page, until its editor is ready. That takes a few seconds to a few minutes after a build finishes, or the first time you open a page you built before the editor arrived. Wait until the button reads Publish. If you publish before then, Atlas imports the page as it was built, the older way: the panel ends with “Import successful”, with Open in theme customizer and Go to Atlas dashboard, and your product is published to all your sales channels.

If a store or product page keeps reading Import and edit in Shopify, Atlas couldn't prepare its editor, and publishing works the older way too. See Editing a page with Atlas.


If the app embed won't turn on

If turning on the switch shows “We couldn’t turn it on. Try again.”, try once more. If it still fails:

  1. Click Open theme editor. Your theme editor opens on its app embeds, with Atlas ready.

  2. Turn on Atlas Page Builder.

  3. Click Save in the theme editor.

  4. Back in Atlas Web, publish again. If the switch still shows, reload the page and open the panel again.

Settings → Theme extensions also shows whether the embed is on in a theme: it's the Store builder row. See How to turn on Atlas in your Shopify theme.

⚠️ Turning the Atlas Page Builder app embed off later stops your Atlas store and product pages in that theme working as built. Leave it on in every theme you publish to.


If publishing fails

  • “This page is already being imported. Try again in a few minutes.” An earlier publish of this page is still running. Wait, then try again.

  • “Preparing your page. Try again in a moment.” Atlas is still preparing the page for publishing, for a full store usually its home page. Wait a minute, then click Publish again.

  • “This page changed while you were publishing. Try again.” The page got a new version as you clicked Publish, for example from a change made in another tab. Click Publish again.

  • “The import is taking longer than usual. Check your theme in Shopify.” The publish is still running. Check your theme in Shopify; the page shows Live in Pages once it's done.

  • “Something went wrong. Try again.” Try again. If it keeps happening, check the store is still connected: Settings → Integrations → Manage.

  • “Connect your store to publish this page.” (pre-sell pages) Connect the store, then publish again.

For every message, including the ones a page published with Import and edit in Shopify shows, and for a Publish button that stays greyed out, see Why can't I publish my page?


Publishing a page again

Open the page, click Publish, pick a theme and click Publish. Publishing again uses no credits, and it publishes the page as it is in Atlas now, with every change you've made since. What it does depends on the page:

  • A store or product page, to a theme it's already in: each theme holds one copy of the page, and each publish updates it.

  • A store or product page, to another theme: Atlas adds the page to that theme and switches the product to it.

  • A full store: the theme's home page is replaced again. Atlas backs it up first.

  • A pre-sell page: each publish adds another new page to your store. The page from the earlier publish stays.

Before it updates a store or product page, Atlas asks when something changed in Shopify since the page was last published to that theme:

What you see

Why

What to do

“Switch this product’s page?” with “This product now uses another page template. Publishing switches it to this page.”

The product was switched to another template in Shopify.

Click Switch and publish to put the product back on this page, or Cancel to leave it as it is.

“Replace changes made in Shopify?” with “This page was changed in Shopify’s theme editor since you published it. Publishing replaces those changes. Apps you added stay.”

The page was changed in Shopify's theme editor.

Click Replace and publish to publish the page from Atlas over those changes, or Cancel to keep them. Apps you added to the page in the theme editor stay either way.

To publish an earlier version of a page, go back to that version in the editor first, then publish. See Editing a page with Atlas.


What does "Your Atlas Subscription is Inactive" mean?

In your theme editor or preview, an Atlas page can show “Your Atlas Subscription is Inactive. Subscribe to re-gain access to your page”. Customers never see it. It means nothing covers this store's Atlas pages right now.

Your Atlas Web account covers them while the store is connected to it and the account can publish: on a paid plan, on the Free plan with a card saved, or with a credit pack you bought. A plan you cancel moves you back to Free with the card you paid with, so the pages stay covered. A store with its own plan in the Atlas app inside Shopify admin is covered too.

To clear it:

  1. Check the store is connected: Settings → Integrations → Manage.

  2. Check Settings → Billing & credits shows a paid plan, or the Free plan with a card saved. If not, choose a plan or add a card. See Plans and credits.

The notice has two buttons, Open Atlas Billing and Go to Atlas:

  • On a store you connected from Atlas Web, where connecting it installed the Atlas app, Open Atlas Billing opens Plans & credits in Atlas Web and Go to Atlas opens Atlas Web's Home. If you're signed out, you sign in first.

  • On a store that already had the Atlas app from the Shopify App Store, both open the Atlas app inside Shopify admin, which has its own plans for its own features. For pages built with Atlas Web, you don't need a plan there. See Atlas Web and the Atlas app in Shopify admin.

If the notice stays after both checks, open the menu from your profile at the bottom of the sidebar and choose Chat with support, or email support@helloatlas.io.

Did this answer your question?