For our guide on pairing Bluetooth devices to your computer with Ava, click here.


🎤 Pairing a Bluetooth Microphone

If you're still looking for a microphone, consider one of our recommended microphones here.

1. On your Bluetooth microphone, enable Pairing Mode

This is typically enabled by pressing on the main button for a few seconds until the device starts blinking. Otherwise, check the manual provided with the microphone.


2. (iOS) On your phone Settings, go to Bluetooth. You should see your device at the bottom where it says OTHER DEVICES. Select the device and connect.


(Android) Swipe down from the top of the screen > Touch and hold Bluetooth > Find the keyboard in the list of devices and pair.

3. Once you have successfully paired the device, on Ava, start a conversation. Then, tap on the ⚙️ settings icon. Under the Microphone section, make sure that your Bluetooth microphone is selected.

⌨️ Pairing a Bluetooth Keyboard

If you don't have a Bluetooth keyboard yet, we recommend this one.

1. On your Bluetooth keyboard, enable Pairing Mode

This is typically enabled by pressing on the main button for a few seconds until the device starts blinking. Otherwise, check the manual provided with the keyboard.

2. (iOS) On your phone Settings, go to Bluetooth. You should see your device at the bottom where it says OTHER DEVICES. Select the device and connect.


(Android) Swipe down from the top of the screen > Touch and hold Bluetooth > Find the keyboard in the list of devices and pair

3. Open a conversation on Ava and tap the ⌨️ Type button (bottom right-hand corner) to type a response- Ava can even speak the text for you!

For more information on Ava Speak, click here

Did this answer your question?