Introduction
Feature Summary: You can pair your Stripe Reader S700, order hardware and start warranty claims directly in CourtReserve, all from the Terminal subsection of the CourtPay tab. Everything is managed in one place, so there's no separate Stripe login to keep track of. The S700 is currently the only supported reader.
Use Cases:
Charge and connect to WiFi
Generate a pairing code on the reader
Add the reader in CourtReserve
Managing your readers
Before You Start
Have the reader, its power cable and your WiFi details ready, and complete the steps in order.
A Stripe Reader S700, with its battery and charging cable
Your WiFi network name and password
A CourtReserve login with access to the CourtPay section [Fill in: required role or permission]
[Fill in: any CourtPay setup that must be finished first, such as account verification or a location]
Note: If your reader is already charged and connected to WiFi, skip to Step 2.
Step 1: Charge and Connect to WiFi
The reader must be powered on and online before you can register it.
Insert the battery. Locate the battery compartment on the back of the reader. Insert the battery and secure the cover before connecting to power.
Charge the reader. Connect the reader to power using the included cable and let it charge before setup.
Power on the device. Press and hold the power button until the screen lights up.
Connect to WiFi. Open the reader's Settings menu and connect to your WiFi network.
Step 2: Generate a Pairing Code on the Reader
The pairing code is how CourtPay identifies your reader, so keep it on screen for Step 3.
Open the Settings menu. Swipe right from the left edge of the reader screen to reveal the menu.
Enter the admin passcode. Tap Settings and enter the passcode: 07139
Generate a pairing code. Tap Generate Pairing Code. A unique three-word code appears on screen.
Step 3: Add the Reader in CourtReserve
Registration happens entirely in CourtReserve, so you won't need a separate Stripe login.
Log in to CourtReserve.
Select the CourtPay tab, then select Card Readers.
Click Add terminal. It's at the top right of the Terminals list. The Add terminal window opens.
Choose a location. Pick your club's location from the Location dropdown. No location yet? Click Add new location, type a New location name, then click Create location. The address comes from your club settings.
Enter the registration code. Type the three-word code from your reader into the Registration code field.
Name the reader. Optional: add a Terminal name, such as Front Desk, so staff can tell readers apart. Then click Add terminal.
Confirm. The reader now appears by name in the Terminals list on the Card Readers tab.
Managing Your Readers
All reader changes are made in the same Terminal tab.
Rename a reader: click the pencil icon next to the reader in the Terminals list.
Remove a reader: click the trash icon next to the reader in the Terminals list.
Add another reader: Repeat Steps 1 to 3 for each reader.
Troubleshooting
Most setup problems come from the reader being offline or the pairing code being mistyped.
Problem | What to Do |
Pairing code isn't accepted | Check the three words for typos, or generate a new code on the reader and try again |
Reader doesn't appear in the Terminal tab after registering | Confirm the reader is powered on and connected to WiFi, then refresh the page |
Reader shows as offline | Check power and WiFi, then restart the reader |
For declines and errors during payments, see Part 4 of the CourtPay Declines & Error Codes guide.





