IMPORTANT: This guide is relevant for users who are using Fieldy version 1.0.8 B or above. For versions below, please see this article.
You can check what version you are using by connecting your Fieldy, going into your account and finding "Current Device Version".
Normal Operation Indicators
White (steady):
Device is connected and battery level is above 5%.
White (blinking/breathing):
Device is ready to connect and battery is above 5%.
Red (steady):
Device is connected, but battery level is below 5%.
Red (blinking/breathing):
Device is ready to connect, with battery below 5%.
Button Interactions and LED Responses
On Single Click:
Green: Battery is above 15%.
Orange: Battery is at a medium level.
Red: Battery is below 5%.
Red blinking 3 times, then no light:
The device is fully discharged and entering sleep mode.
On Long Press (1 second):
No light: Device is in sleep mode or turned off.
On Very Long Press (10 seconds):
Firmware v1.0.4+:
Red LED blinks 4 times – indicates the device was power-cycled.
Firmware v1.0.8+:
Red, Green, Blue, White – each blinks twice – confirms the device was power-cycled.
Error Indicators
Red (blinking rapidly):
Firmware update failed or is incomplete.
Purple (Blue steady + Red blinking rapidly):
Indicates a critical firmware issue.
Need Help?
If your Compass device shows any other color or combination not listed above, or if the LED behavior doesn’t match the descriptions, please contact our support team for more assistance.