How to Enable a 3rd Brake Light Cargo Camera on a Ram Truck with Uconnect Firmware
Enabling a 3rd brake light cargo camera on a Ram truck with Uconnect firmware involves selecting one of two upgrade paths. This guide provides an overview of the steps required and confirms the compatibility of the recommended cargo camera kit.
Upgrade Paths
You have two options to enable the cargo camera:
Update the Existing Radio’s Firmware - Update your radio’s firmware to the latest compatible version using a flash drive. For example, if your current firmware is 15.26.1, it must be updated to a version that supports the cargo camera functionality. - After updating the firmware, use an OBD programmer to enable the cargo camera input. - This option allows you to retain your existing radio while adding the cargo camera functionality.
Replace the Radio with a 2018+ Uconnect Unit - Replace your current radio with a compatible 2018+ (4C Uconnect) unit. These units are designed to support the cargo camera upgrade. - Ensure the replacement unit is compatible with your vehicle model and the cargo camera kit.
Steps for Each Upgrade Path
Updating the Existing Radio’s Firmware
Obtain the latest firmware version for your radio.
Use a flash drive to install the firmware update.
Run the OBD programmer to enable the cargo camera input.
Replacing the Radio
Purchase a compatible 2018+ Uconnect unit.
Install the new radio in your vehicle.
Verify that the cargo camera input is enabled and functioning.
Cargo Camera Kit Compatibility
The cargo camera kit referenced by support is confirmed to be compatible with the described vehicle and both upgrade paths. Ensure you use the correct kit for your Ram truck model to avoid compatibility issues.
Conclusion
By following one of the two upgrade paths outlined above, you can successfully enable a 3rd brake light cargo camera on your Ram truck. Whether you choose to update your existing radio’s firmware or replace it with a 2018+ Uconnect unit, ensure all components are compatible and properly installed.