Before we begin, please check to ensure that you have received the following in your onboarding pack:
S1F2 payment terminal
USB cable and power plug for charging
Charging base
Receipt paper roll
If you are missing any of these, please get in touch with us. We'll often be able to supply replacement parts the same day!
Turning on the terminal
Press and hold the power button on the right-hand side of the terminal until the display turns on. If your terminal's battery is depleted, you'll need to connect it to a power source to charge the battery.
When you first turn on the terminal after it has been powered off for a long time, it may need to update. This can take 10-30 minutes.
When connected to a power supply, the battery charges and an icon at the top of the display indicates the battery charge level.
Setting up your terminal
Insert a Insert a receipt roll
Press on the sides of the terminal's paper roll cover and open the cover
Place the paper roll and close the cover, making sure the paper sticks out a bit over the contactless logo
2. Press and hold the power button which can be found on the side of the terminal keep the button pressed until the display turns on
3. On the welcome screen, select your language
4. Connect your terminal to the Wi-Fi
After selecting your language, select the arrow button which pops up
On the setup Wi-Fi screen, select the + sign
Turn on the WLAN toggle switch
Select a Wi-Fi network from the list
Enter the Wi-Fi password
Select ‘Ok’
5. On the confirm store screen, double check it is your store you can verify this as the address which shows up should be your store address it will also show a unique ID which we will share with you beforehand and if the address and ID are correct select the check mark button. If it is not your store please reach out to your main contact at Kody.