Pick your label size
Meadow supports two sizes:
Connect the Zebra ZD410 printer
From a Mac (printing labels from the browser)
If you’re printing from Meadow Admin on a Mac with a Zebra ZD410:
System Preferences → Printers & Scanners → Add Printer.
Select Zebra ZD410 in the list.
Choose a driver → Select Software → search “EPL2” → Zebra EPL2.
Confirm; the printer will appear in your list and is ready to print.
Windows (PC) setup
Based on Microsoft’s official instructions for adding printers:
Your Zebra ZD410 printer will automatically install if you follow the below steps.
Connect your USB certified (version 2.0) cable from your printer to your computer's USB port.
Press the printer's power button and wait for the solid green status indicator light.
NOTE: It is normal that the network indicator light is red with a USB connection setup.To open your Control Panel, click the Windows Start Menu > Control Panel.
NOTE: If you are using a Windows 8 or 10 version, right click the Windows Start Menu instead of doing a left click.
From the Hardware and Sound section, click View devices and printers.
From the Printers section, confirm that your ZDesigner ZD410-203dpi ZPL was added.
If you are using a Windows computer, you will need to format your computer settings.
To open your Control Panel, click the Windows Start Menu > Control Panel.
NOTE: If you are using a Windows 8 or 10 version, right click the Windows Start Menu instead of doing a left click.From the Hardware and Sound section, click View devices and printers.
From the Printers section, locate your ZDesigner ZD410-203dpi ZPL in the list.
Right click your ZDesigner ZD410-203dpi ZPL.
Click Printer preferences.
From the OPTIONS tab, enter your label size in inches.
Click Apply.
Note: Here is the Windows Driver in case you need it
Calibrate if labels are off-center
If printing is off-center or runs over the edge:
Hold the left + right buttons on top of the ZD410 for 2–3 seconds to calibrate.
It may feed a few blank labels while adjusting.
Tips & related help
For scanning at POS, ensure your products have barcodes and your scanner is paired.