Skip to main content

Dojo Pocket Setup

How to configure PocketTouch on the Dojo Pocket device.

Jonathan Hutchings avatar
Written by Jonathan Hutchings
Updated today

Make sure PAC and PAT are turned OFF (You need to have integrated payments turned on to do this). The Dojo terminal talks directly to PocketTouch and NOT TouchPoint.

Remove SIM card from DojoPocket to prevent switching to 4G which will cause comms issues.

If running PocketTouch on a Dojo Pocket terminal you will need to configure a card payment option as follows:

  • PocketTouch > Config > Config > enter 2552 > Press OK:

  • Edit Finalise Config

    • Setup a key for Cards to Use Local EFT (if you change the CASH key to cards then you do not need to edit the menu in the later step)

    • Set Allow Table Payments to YES

    • Set EFT Module to EFT Enabled

  • Edit Floorplan Config

    • AutoNewCheck Enabled - YES (only if you do NOT need a Table #)

  • Edit EFT Merchant Config

    • Enable gratuity? - Yes

  • Edit Menu

    • You need to assign the Local EFT finalise key to the Final menu

      • Tap Sub Menus

      • Tap the arrow right button (from middle row of buttons) to select the Final Menu

      • Scroll the Available Buttons list and tap the finalise key you want to allocate to the menu (it will be highlighted green once tapped)

      • Tap the Add button - the finalise key will now appear in the Final Menu section

      • Tap the finalise key and use the Up / Down buttons to set the position in the menu

      • Tap Save Changes & Exit

Did this answer your question?