Replacing the LED Disc for Tall Poppy and Apex cordless lamp -
Remove the diffuser lid: Turn the top lid of the lamp diffuser counter-clockwise to unscrew it.
Disconnect the electrical cable: Once the lid is off, carefully disconnect the electrical cable from the LED disc.
(Tall Poppy only) Remove the screw: If you have a Tall Poppy lamp, remove the single Philips Head screw that secures the LED disc.
Replace the LED disc: Remove the old LED disc and replace it with the new one. Replace the Philips Head screw is you have a Tall Poppy lamp.
Reconnect the electrical cable: Carefully reconnect the electrical cable to the new LED disc.
Test and reassemble: Before replacing the lid, test the lamp to ensure it's working. If it is, carefully screw the lid back on, being extra cautious not to pinch or sever the cable. Be careful not to tighten the tops too much as this could damage the thread.
For pictorial instructions, download the user guide from our website or watch the instructional video. For further assistance, feel free to contact our support team.
Email: service@neoz.com.au
Service Enquiry Form: Available on our website