These three reports show your books entry by entry. The General Ledger lists every account and every entry in a date range. The Account Register does the same for the accounts you pick, and it's the report other reports open when you click a category or account. The Journal Entries report lists the journal entries you've added by hand.
Use them when a total on the balance sheet or the P&L looks wrong and you need to see the entries behind it.
Before you start: You need Reports access (read-only is enough) to run, export and save these reports. Scheduling one needs Admin Status, because the Reports permission has no write level. All three are under Reports → Business Overview Reports.
How to set dates, export a CSV, save a PDF and favorite a report is the same for every report. See Run, filter, export and favorite a report.
Run the general ledger
Go to Reports and click General Ledger.
Pick a date range. It opens on This month; use the chips (Last month, This year, This FY and so on) or type a Start date and End date.
Click Show results.
The report runs again by itself when you click a date chip. If you type your own dates, click Show results.
What's on it
The report is grouped into Assets, Liabilities, Equities, Income Categories and Expense Categories, then by account. Under each account you see:
A Balance before line with the account's balance going into your start date, for assets, liabilities and equity that had earlier activity or a starting balance.
One row per entry in the range.
A Total for line with the account's debits, credits and ending balance.
The columns are:
Column | What it shows |
Entry Date | The date the entry counts on in your books |
Description | What the entry is, for example Charge "Q3 Dues" for Unit 12 or the bank transaction's description |
Memo | The memo on the transaction or journal entry |
Recorded Date | When PayHOA wrote the entry |
Recorded By | Who made the change that wrote it |
Reference | A link to the invoice, payment, transaction or payable behind the entry |
Vendor | The vendor on the transaction or payable |
Debit / Credit | The amount on each side |
Balance | The account's running balance |
When was an entry made, and who made or changed it? Recorded Date is the day the entry was written to your books, which can be later than its Entry Date, and Recorded By is the person whose change wrote it. Recorded By reads System for entries PayHOA posts by itself with nobody signed in, such as a scheduled autopay payment or an automatic lockbox import, and PayHOA Support when PayHOA staff made the change. An edit doesn't overwrite an entry: it adds a Reverse: line and a new line, each with its own Recorded Date and Recorded By, so the trail of who changed what is the lines themselves. Both columns are blank on entries written when your whole ledger was built or rebuilt, for example when your association was moved to Accounting V2 or PayHOA support rebuilt the ledger. The older accounting version has neither column, so there the ledger can't show when an entry was entered or by whom.
Accounts Receivable and Prepaid Revenue are split by unit, each with its own Balance before and Total for line, so you can see which unit owes or has paid ahead. Entries with no unit are grouped under No Associated Unit. A journal entry can't be tied to a unit, so a journal entry posted to Accounts Receivable or Prepaid Revenue is listed under No Associated Unit and doesn't change what any owner owes; to change a unit's balance, edit the invoice or payment instead.
The Reference column is on screen only; it isn't in the PDF or the CSV. The CSV lists entries only, without the Balance before and Total for lines, so an account with no entries in the range isn't in the file.
A memo typed on a transaction doesn't show on the general ledger or the Account Register. It isn't a permissions problem, and on Accounting V2 there's nothing to update. Check these:
On the Account Register the Memo column is off to start with. Turn on Show memo column and click Show results. This includes the register that opens when you click a category or account on another report. The General Ledger always shows Memo.
A memo added or changed after the transaction was approved is copied onto the entries already on the ledger when you save the transaction. Run the report again to see it.
A bill paid from Payables shows the payable's memo on its entries when the payable has one, not the bank transaction's memo.
If the memo is on the transaction on Transactions and still isn't on the ledger entry after you run the report again, contact PayHOA's accounting support (accounting@payhoa.com or 859-249-8828) with the transaction's date and amount and the memo you typed.
Equity accounts on the general ledger. The Equities group lists Opening Balance, Excluded and any equity accounts you added, with the entries posted to each. Net Income and Retained Earnings are worked out on the balance sheet from your income and expense categories, so here they show only entries posted straight to them, such as a journal entry or a starting balance on Retained Earnings. If an accountant or auditor says the general ledger doesn't include equity accounts, see Where is equity?
Income and expense accounts show only the activity in your date range. Their running balance starts at $0 on your start date and doesn't carry in earlier months, so each category's total matches the P&L for the same dates.
A deleted account still appears, with (deleted) after its name, if it has a balance or has entries in the range. A deleted account that never held money and has nothing in the range is left off.
If there's nothing in the range, you see No results found and No ledger entries for {dates}. Adjust the date range and try again.
On the older accounting version: the columns are Date, Description, Category, Debit, Credit and Balance, with Memo and Vendor when you ask for them. Assets, liabilities and equity get a Starting Balance line; income and expense accounts don't.
Look at one account: the account register
Go to Reports and click Account Register.
Pick a date range. It opens on This month.
Open the Select account dropdown. Every account is selected when the page opens, and the box shows how many ({n} selected). To look at only some:
Click Deselect all at the bottom of the list, then click the accounts you want. They're grouped under Assets, Liabilities, Equity, Income and Expenses.
Type in Search accounts to find one by name.
To include deleted accounts, turn on Show deleted in the list. Deleted accounts carry a Deleted badge.
Click outside the list to close it.
Turn on Show memo column or Show vendor column if you want those columns.
Click Show results.
The register shows each account the same way as the general ledger. Every account you pick gets a Balance before line, so an account with no activity in the range still shows up with its balance.
Where an account's starting balance shows. A starting balance (opening balance) is one row dated the account's Balance as of date, described Starting balance for asset … (or liability, equity or category). If your range starts after that date, the row isn't listed and the amount is inside Balance before. An income or expense category always starts at $0.00 on your start date and doesn't carry in earlier amounts, so a category's starting balance shows only when the range includes its date. If starting balances have disappeared from accounts that had them, or balances that were right are suddenly wrong, see My balances were right and are now wrong.
A transaction is on the bank account's register but not on the category's. Every entry has two sides. To find the other one, run the General Ledger with the start and end date both set to the transaction's date and look for the same description under another account. It may be a transfer, an excluded transaction, a bill payment (whose other side on accrual basis is Accounts Payable) or a deposit of owner payments. See Where is the other side?
If you click Show results with no account selected, you see Please select at least one account. and the page reads Select an account above and click "Show results" to see the register. A brand-new association with no chart of accounts sees No accounts available: This organization has no chart of accounts yet, so there's nothing to report.
Opening the register from another report
On the Balance Sheet, Trial Balance, the P&L reports, the budget reports and Expenses by Category, click an account or category row. The Account Register opens for that account and the same dates, so you can see the entries behind the number. On the Trial Balance, only asset, liability and equity rows open their account.
Tip: To see everything that went through one bank account, pick only that bank account under Assets. The Balance column then works like a check register for the account.
Separate reports for operating and reserve money. The profit and loss and expense reports can't be filtered by bank account or by fund; they total by category for the whole association. To report on one account, such as the reserve account, run the Account Register for that bank account only. The same works for an asset that isn't a bank account, such as an investment account or a CD: its entries are listed here.
See your journal entries
Go to Reports and click Journal Entries.
Pick a date range. It opens on This FY.
Click Show results.
Each journal entry is one row with its Date, Description, Memo and its total Debit and Credit. Expand a row to see each line: the account and the debit or credit on it. A Total row at the bottom adds up every entry in the range.
To add, edit, copy or delete a journal entry, see Add a transaction or journal entry by hand.
How the ledger stays up to date
On Accounting V2, the ledger is written as you work. When an invoice, payment, payable, transaction or journal entry is created, changed or deleted, PayHOA posts the matching entries as part of that change. These reports read the ledger directly, so they're current when you run them. There's no Update now link and nothing to refresh. If you were told to click Update now on the General Ledger or Balance Sheet, or Actions → Update General Ledger on Transactions, those exist only on the older accounting version; on Accounting V2 you can skip that step. Work PayHOA does in the background, such as importing lockbox payments, running autopay or matching transactions, posts when that job finishes, which can take a few minutes; wait and run the report again.
So if you entered a journal entry, it shows on Transactions and you can't see it on the Account Register or another report, you don't have to wait 24 hours on Accounting V2: it posted when you saved it. Check the report's dates and the accounts picked under Select account first.
If one entry is wrong, fix the record it came from: the invoice, payment, transaction or payable. The ledger follows. If an approved transaction or a journal entry is missing from the ledger after a few minutes, or only one side of it posted, contact PayHOA's accounting support with the date and amount.
Note: PayHOA support can rebuild your whole ledger from your current records. On Accounting V2 that's a last resort for broad problems, because a rebuild re-creates every entry from today's data: manual adjustments that have no source record, the original recording dates, and entries for records that no longer qualify (such as unapproved transactions) are lost. Ask support to fix the specific entry first.
On the older accounting version: the General Ledger, Account Register and Balance Sheet read a copy of the ledger that PayHOA rebuilds once a day. Under the page title you'll see Ledger updated {date} at {time} and an Update now link.
Click Update now to rebuild it. The link reads Updating and the report reloads when the rebuild is done, usually within a few minutes. If it fails you see Unable to update ledger.
Opening the General Ledger or Account Register after something changed also starts a rebuild, but the page shows the previous copy until it finishes. Run the report again a few minutes later.
You can also click Actions → Update general ledger on Transactions, or ask Gable to rebuild the ledger. Gable shows a Rebuild the general ledger card; click Rebuild ledger to start it.
The P&L, budget and expense reports don't wait for a rebuild. They read your transactions directly, so they can show a change before the ledger does.
Deleted and changed items on the ledger
PayHOA doesn't erase ledger entries. When you delete or change something that already posted, it adds entries that undo the old ones:
Deleting an invoice, payment, transaction or payable adds a reversing entry. Its description starts with Reverse:, for example Reverse: Charge "Q3 Dues" for Unit 12. The original and the reversal both show on the general ledger and net to zero.
Changing a category on a posted transaction adds an entry whose description starts with Recategorized transaction. It moves the amount from the old category to the new one, on the transaction's date. See Transactions: common questions.
A returned payment adds Reversal of Returned Payment entries.
Un-approving a transaction adds a Reverse: entry too. Each time an approved transaction is sent back to For review (Undo approve, or clearing its category), PayHOA reverses its posting, and approving it again posts a new entry. Changing an approved transaction's date, amount or bank account also reverses the old entry and posts a new one.
A transaction that keeps reversing. If a payment you entered seems to reverse itself again and again on the Account Register or the general ledger, look at what was done to it. A vendor payment that was approved, un-approved and approved again shows three lines, the payment, a Reverse: line and the payment again, and they net to the one payment. Nothing reverses by itself: every Reverse: line follows a change someone made, and the Recorded Date and Recorded By columns show when and by whom. To stop adding lines, leave the transaction approved once it's right. These lines can't be hidden or filtered out of the general ledger or the account register, and a transaction can't be deleted from the ledger's history. This is different from a returned payment, which is an owner's payment that the bank sent back.
So the general ledger can list an item you've deleted. That's expected: it keeps a record of what happened. The P&L and balance sheet show the net result, which is zero for a deleted item.
Which month does a reversal land in? The same month as the entry it undoes. A Reverse: entry carries the original entry's Entry Date, not the day you deleted the item. For example, on accrual basis a late fee dated in July and deleted in August shows two lines in July's late fee income, the charge and its Reverse: line, and they net to zero in July; August isn't changed. The Recorded Date column shows the day the deletion was made. So a deletion doesn't distort the month you made it in, but it does change the month the item was dated in, even if you've already reported on that month.
An approved bank transaction counts on its own date, not the day you approved it. A bank transaction dated in July and approved in August is on July's general ledger and July's profit and loss. Its Entry Date is the transaction's date; Recorded Date is when the entry was written. You don't need a journal entry to move it back into the month it belongs to.
For a deleted bank transaction, the general ledger is the only place you can still see it: the Transactions page has no list of deleted transactions. A transaction that was still waiting on For review when it was deleted had never posted, so it isn't on the ledger either. To get a deleted transaction back, see Exclude, delete or fix duplicate transactions.

