Skip to main content

Scheduled reports

A schedule runs a report, several reports, or a report packet on a timetable and emails the results, saves them to Documents, or both.

M
Written by Michael Bollinger

A schedule runs a report, several reports, or a report packet on a timetable and emails the results, saves them to Documents, or both. Use it to send the board last month's financials on the 1st, the delinquency list every Monday, or the full board package before each meeting. Recipients don't need a PayHOA account.

Before you start: You need the Reports permission. It has one level, Read, which lets you see schedules and their run history. To create, edit, pause or delete a schedule you need Admin Status: there is no Reports write permission to give. See Permissions with only one level.

Find your schedules

  1. Click Reports in the left menu.

  2. Open the Scheduled reports tab.

The chips All scheduled, Active and Paused filter the list, and Search... finds a schedule by report name. The table shows Report name, Frequency, Date coverage, Next run, Last run, Recipients, Format and Status; use Columns to hide some. Last run shows when the schedule last ran and a badge for how it went. A schedule with several reports is named after the first one, for example Budget Summary +1 more.

Click a row to open the schedule's page. The ⋯ menu on a row has View report, Edit schedule, Pause (or Resume) and Delete.

If there are no schedules yet, the tab shows No scheduled reports yet (Create a schedule to automatically generate and email reports on a recurring basis.) and Schedule your first report.

Create a schedule

You can start in two places:

  • Scheduled reports tab → New schedule (or Schedule your first report). This opens the New scheduled report page, where you can add several reports or a packet.

  • A report's own page → Schedule, in the header above the results. This opens the same page with that report already chosen; you can't add other reports or switch to a packet from there. For a custom report, open the saved template and click Actions → Schedule; a custom report has no Schedule until it's saved as a template.

The page has three cards, What to send, When to send it and Who gets it, and a Summary on the right.

1. What to send

Pick Individual reports or Report packet.

Individual reports

  1. In Reports, type in Search reports to add and pick a report. Standard reports and your saved custom report templates (under Custom reports) are both listed. Add as many as you like.

  2. Each report you add opens its settings card. Set its dates and options there; they're the same settings a packet uses (see Report packets). The line under the report's name sums them up, for example Start of current month – End of current month · Showing all · No comparison.

  3. Remove a report with its bin icon.

Bank Reconciliation, Alliance Statements and Check Register Legacy can't be scheduled by themselves. To send a bank reconciliation or an Alliance statement on a timetable, put it in a report packet and schedule the packet.

Important: A report you add starts with Start of current month to End of current month (or Current date for an "as of" report). On a schedule that runs on the 1st, that covers the month that has only just started. For last month's numbers, set Starting date to Start of previous month and Ending date to End of previous month, and As of date to End of previous month.

Dates are worked out each time the schedule runs, in your association's timezone, so a schedule keeps rolling forward. Custom date... fixes a date that never moves.

Report packet

  1. Pick the packet in Report packet (Choose a packet). Each run generates the packet's combined PDF using the settings you pin here.

  2. Optional: use Date range (Apply one range to every report) to set one range on every report in the packet, either a preset such as last month or this fiscal year, or your own dates. A preset rolls forward each run; your own dates stay fixed.

  3. Under Reports in packet ({n} of {m} selected), untick any report you don't want sent, and click a report to change its settings for this schedule.

The schedule keeps its own copy of the reports you ticked and their settings.

Important: After you edit the packet itself (Edit on the Report packets tab), open every schedule that sends it, tick its reports again and click Save changes. Until you do, the schedule no longer matches the packet's reports and can send a PDF with only the cover page. The same applies when you add a report to the packet: it isn't sent until you tick it on the schedule.

Format

Click PDF, CSV or both. With both, each report is attached twice, once in each format. At least one must stay selected. There's no Excel format; CSV opens in Excel. A packet always arrives as one merged PDF, whatever you pick here.

2. When to send it

  1. How often: Daily, Weekly, Monthly, Quarterly or Annually.

  2. Run on:

    • Weekly: a day, Monday to Sunday.

    • Monthly and Quarterly: 1st of month, 15th of month or Last day of month.

    • Annually: a Month and a Day.

  3. At: the hour, from 12:00 AM to 11:00 PM. The abbreviation next to it (for example EST) is your association's timezone; hover over it to see Times are in your organization's timezone: …. Times are on the hour only.

The line under When to send it sums it up, for example Monthly on the 1st at 8:00 AM EST.

Quarterly runs every three months, starting from the first run. It isn't tied to calendar quarters. For example, a quarterly schedule on the 15th of month created on November 6 runs on November 15, February 15, May 15 and so on; one on the 1st of month created the same day first runs on February 1, because November 1 has already passed.

Important: Two timing problems to know about today:

  • Weekly schedules ignore the At time. They go out just after midnight (about 12:05 AM) on the day you picked, whatever hour you chose. A weekly schedule also never runs on the day you create it; the first run is the next time that weekday comes round.

  • Last day of month can skip the month after a 31-day month: after a run on January 31 the next one is March 31, and April, June, September and November are skipped the same way. For a dependable month-end package, use 1st of month with last month's dates.

3. Who gets it

  1. Email it (To people, tags or any email address. A tag reaches whoever has it when the report runs.) is on by default. In the box (Search people or tags, or type an email), search for people or tags, or type any email address and press Enter.

    • People with no email on file are greyed out (No email on file).

    • Under Owner tags, pick a tag to send to everyone who has it when the report runs, including people tagged later. Archived people are skipped. If nobody with that tag has an email yet, you see No one tagged {tag} has an email yet; they'll get it once they do.

  2. Optional: turn on Save to Documents (Each run's file is filed in a Documents folder.) and pick a folder (Documents root or any folder). Each run's files are saved there for admins only, even in a folder owners can see. See Who can see a document to share one.

You can turn email off and only save to Documents, but a schedule has to deliver somewhere. You'll see Turn on email or Documents, otherwise this schedule has nowhere to deliver. or Add at least one person, tag or email, or turn email off and save to Documents instead. until it does.

4. Check the summary and save

The Summary on the right shows:

  • Next run — for example Next scheduled monthly run at 8 AM Eastern.

  • Will cover — the dates the reports cover, for example Current month or Previous month, or Set on each report when the reports have different dates.

  • Format — PDF, CSV or both.

  • Reports — each report with its dates.

  • Delivered to — the people, tags, email addresses and Documents folder, or Nowhere yet.

Click Save schedule (or Save changes when editing). The schedule is Active straight away. If you leave the page with unsaved changes, Leave without saving? asks you to confirm.

How and when it goes out

  • Timing: PayHOA checks for due schedules once an hour, at five minutes past. A schedule set for 8:00 AM goes out at about 8:05 AM. Large reports and packets can take a few more minutes to arrive. Weekly schedules are the exception (see the note under When to send it).

  • The email: each recipient gets their own email, with the subject Scheduled Report: {report name} (for several reports, the first report's name and +{n} more). The reports are attached as files, not links. Each file is named after the report and the end date it covers, for example Balance-Sheet_2026-10-31.pdf.

  • A packet is generated first and then sent as one PDF with a cover page. It also appears in the packet's Recent runs on the Report packets tab, named after the packet and the run date.

  • Paused schedules don't run. When you resume one, it picks up at the next scheduled time; runs missed while it was paused aren't sent.

See whether a run went out

Open the schedule (click its row, or ⋯ → View report). The page is titled Scheduled report: {report name} and shows the schedule's status, a Reports included card (Report packet included for a packet), Run history (The last 10 runs), a Schedule card (Runs, Next run, Last run, Will cover, Format) and a Delivery card (Email, Save to Documents).

Each run shows when it ran and a badge:

Badge

What the line under it says

What it means

Sent

Emailed to {n} recipient(s), or Saved to Documents

Delivered.

Bounced

Not delivered to {emails}

The run went out, but those addresses bounced or failed. Check the addresses; see Why an owner isn't getting your emails.

Failed

The reason, for example The report returned no data, so nothing was sent., or The report did not send.

Nothing was delivered for that run.

Generating

The packet is still being generated.

A packet run that hasn't finished yet. If the packet fails to generate, or the packet was deleted, the run stays on Generating; it never changes to Failed.

If there are no runs yet, you see No runs yet and when the first run is.

Important: PayHOA doesn't email anyone when a scheduled run fails. Check Run history, or the badge in the Last run column, now and then.

If a schedule has several reports and one of them has no data, the others are still sent. A run only fails when none of them returns anything.

Note: The dates set on each report are the ones a run uses. To check them, click Edit schedule and look at Will cover in the summary, or open each report's settings.

Change, pause or delete a schedule

  • Edit: ⋯ → Edit schedule, or Actions → Edit schedule on the schedule's page. The Edit scheduled report page opens. Click Save changes.

  • Pause / resume: ⋯ → Pause or Resume, or the same in Actions. The Status changes to Paused or Active.

  • Delete: ⋯ → Delete, then Delete in Delete schedule to confirm Are you sure you want to delete this scheduled report? This action cannot be undone. Files already emailed or saved to Documents aren't affected. Deleting a saved custom report template stops its schedules too.

From a report's own page: when a report has a schedule, the page shows This report has {n} active schedule(s). Next delivery: {date}. Click Manage schedules to open the Scheduled panel, where each schedule shows its Date range, Next run, Recipients and Format, has Pause (or Resume), Delete and Edit, and Add another schedule adds one.

What schedules can't do

  • Send right now. A schedule only runs at its next time. To send something today, run the report or packet and use Export CSV, Save as PDF or Email packet (see Report packets).

  • Attach an Excel file. Use CSV.

  • Send each owner only their own unit's figures. Everyone on the schedule gets the same files.

  • Run at a time other than on the hour.

  • Tell you when a run fails. Nobody is emailed about a failed run.

Troubleshooting

What you see

What to do

The report didn't arrive

Open the schedule and check Run history. Sent means it left PayHOA: check spam and the address. Bounced lists the addresses that failed. No run at all: check Next run and that the schedule is Active.

The report returned no data, so nothing was sent.

The reports had nothing in their date range. Check each report's dates (Edit schedule); a new report starts on the current month.

The numbers cover the wrong month

Edit the schedule and set each report's dates. Start of previous month / End of previous month gives last month.

It went out later than the time I set

Runs go out a few minutes after the hour you pick. If it's more than an hour late, contact support with the schedule's name and the run date.

A weekly report arrives just after midnight

Weekly schedules don't use the At time yet. See the note under When to send it.

A month-end report skipped a month

Last day of month can skip the month after a 31-day month. Use 1st of month with last month's dates.

A packet arrived with only its cover page

The packet was edited after the schedule was saved. Edit the schedule, tick the reports again and save.

Save schedule stays greyed out

Add at least one report (or pick a packet and leave at least one of its reports ticked), and add a recipient or turn on Save to Documents.

The Schedule button isn't on a report

You need Admin Status; the Reports permission alone doesn't show it. A custom report needs a saved template first (Actions → Schedule). Bank Reconciliation, Alliance Statements and Check Register Legacy can't be scheduled.

A packet run shows Generating for a long time

Check the packet's Recent runs on the Report packets tab. If the run there shows Failed, or it's stuck, see the troubleshooting in Report packets; the schedule's run won't update by itself.

A run shows Failed with another message

Contact support with the schedule's name, the run date and the message.

What's next

Did this answer your question?