Skip to main content

Ballot settings, recipients and sending

After you've written the questions, the ballot's page shows a Ready to send checklist.

M
Written by Michael Bollinger

After you've written the questions, the ballot's page shows a Ready to send checklist. Work through it to set when voting closes and how it runs, pick the units that vote, and check the invitation email. Then send the invites, which opens voting straight away.

Before you start: you need Voting write permission, and a ballot with at least one question. See Create a ballot.

Open the Ready to send checklist

Open Votes and click the draft. If you've just clicked Save and continue in the wizard, you're already there.

The Ready to send card says "Check each part, then send the invites to start voting." It has four items:

Item

Done when

If it isn't done, click

Questions

The ballot has at least one question

Add questions

Voting settings

The end date is in the future

Change

Recipients

At least one unit is picked

Change

Invitation email

Always done. It shows Default or Customized.

—

The link beside an item goes away once the item is done. To change a finished item, use the cards on the right of the page: Change on Voting settings or Recipients, and Edit & preview on Invitation email.

Send invites and start voting stays greyed out until every item is done.

Choose the voting settings

  1. On the Voting settings card, click Change.

  2. Set each section below.

  3. Click Save changes.

Start from a template

If you've saved a voting settings template, pick it under Voting settings template, then click Yes, apply. "Applying this template will replace your current voting settings." Leave it on Without template to set everything by hand. See Save settings as a template.

Applying a template sets Require a quorum and its threshold, Anonymous voting and weighted voting from the template, and turns Allow vote changes off. It doesn't change the Voting method, even though the template has one. Pick the method yourself, and check each section before you save.

Note: if the list is greyed out and says "No templates yet…" although you have templates, close the dialog. Go back to Votes, click ⋯ on the draft's row, then Edit settings. The templates load when the dialog opens that way.

How owners vote

Under Voting method, choose:

  • Online only: "Owners cast their ballot through a secure link in the PayHOA portal."

  • Online and paper: owners get the email invitation and a mailed letter. The letter has a QR code that opens the online ballot. Nothing returned on paper is counted. On screen this option reads "Owners receive both — each can participate whichever way they prefer."

With Online and paper, you also choose Mail paper ballots to and the Paper mail options. Read Mailed ballots (QR letters) and offline votes first: some of these options don't work as labelled today.

Letters are billed like other Mail Room mail, so make sure your association has a payment method on file. This dialog doesn't check for one.

Every ballot counts 1 vote per unit, not one per owner. You can't change this. Weighted voting is separate and still available: to make some units' votes count more than others, turn on Count votes by unit weight when you pick the recipients. See Weighted voting, co-owners and owners with several units.

When voting closes

Set the Voting end date and Voting end time. If you leave the time empty, voting closes at 11:59 PM. Times are in your association's time zone.

There's no start date. Voting opens as soon as you send the invites. To open voting on a certain day, keep the ballot as a draft and send it that day.

Quorum

Turn on Require a quorum to set a minimum turnout. Pick a Quorum threshold: 50% (Simple Majority), 60%, 67% (Two-thirds Majority), 75% (Super majority) or Custom. For Custom, type a whole number from 1 to 100 under Custom threshold.

Quorum counts units, out of the ballots sent: the units where at least one owner was emailed the ballot. A unit with no current owner, or whose owners have no email address, isn't in that number. The result is rounded up, and it's never weighted, even on a weighted ballot. For example, with a 50% quorum and 121 ballots sent, 61 units must vote. Before you send, the ballot's Quorum card shows the percentage. Once voting starts it shows Reached or Not reached.

PayHOA doesn't stop a ballot that misses quorum. It ends at the end date as usual and shows that quorum wasn't reached. Your governing documents decide what that means.

Voting rules

  • Anonymous voting: "Hide who voted for what." See Anonymous ballots for exactly what's hidden.

  • Allow vote changes: "Voters can update their response until the ballot closes." This works only on Online only ballots. On Online and paper ballots, owners can't change a vote even with this on.

Results

  • Show preliminary results to homeowners ("While voting is open.")

  • Show final results to homeowners ("Once the ballot closes.")

Both are off at first.

Important: today these switches don't change what owners see on the PayHOA website. An owner's ballot page there always says "Results are not shared yet", whatever you choose. To give owners the results, email them with Share results once voting has ended. See Results, export and sharing results.

Reminders

Turn on Send friendly reminders to email owners who haven't voted. Reminders skip anyone who has voted, and anyone whose unit has already voted. Under When to remind, choose:

  • Repeating, after the ballot is sent: the first reminder goes the number of days you set under Repeat every (days) after you send the ballot, then again every that many days until voting closes. The default is 14.

  • Once, before voting closes: one reminder, the number of days you set under Days before voting closes.

If the reminder would fall after voting closes, you'll see "Voting closes in fewer days than that, so the reminder would already be in the past." Pick fewer days or a later end date.

Reminder emails have the subject "Reminder: Please Cast Your Vote - HOA Ballot".

Save settings as a template

A template saves settings you use often, such as the method, quorum and anonymity for your annual election.

  1. On Votes, click Settings.

  2. On the Voting settings templates tab, click New settings template.

  3. Type a Template name. Vote type always shows 1 vote per unit.

  4. Choose the Vote method: Online only or Online and paper. Online and paper is greyed out if your association has no payment method on file ("In order to use paper ballots, a current payment method is required.").

  5. Under Additional settings, turn on what you need: Weighted voting, Quorum (then pick the Minimum number of votes required for quorum, or Custom and type a Custom quorum) and Anonymous voting.

  6. Click Save and apply.

Save and apply saves the template only. It doesn't change any ballot. To use it, pick it in a ballot's Voting settings, as above.

A template doesn't hold the end date, vote changes, results or reminders. Set those on each ballot. The template's Vote method isn't applied to a ballot either; choose the method on the ballot. Editing a template later doesn't change ballots that already used it.

If you turn on Weighted voting, PayHOA takes you to create a weighted voting category after you save. See Weighted voting.

To delete a template, open it and click Delete template, then Delete.

Pick the recipients

Recipients are units. Every owner of a picked unit who has an email on file gets the invitation, and each of their emails gets a copy. The first owner to vote casts the unit's vote.

  1. On the Recipients card, click Change.

  2. Optional: under Weighted voting, turn on Count votes by unit weight. See Weighted voting.

  3. Under Units ("Choose which units receive this ballot."), select the units that vote. Filter by unit tags or owner tags to pick a group, for example one phase or one building.

  4. Click Save changes.

To set up tags, see Tags, notes and custom fields.

Owners who aren't signed up for the portal can still vote: the email button signs them in and opens their ballot, with no password. The button works once, and for at least 30 days. If an owner opens it and comes back later, they see "This link has already been used. Please log in to continue to your targeted page." They can sign in, or you can resend the ballot to give them a new link. See While voting is open.

Owners with no email on file don't get an invitation. Add their email, or record their vote as an offline vote. See Invite owners to the portal and Mailed ballots and offline votes.

Test ballot (a test vote before the real one): there's no test mode, but you can send the ballot to your own unit only. Owners on units you don't pick never get the invitation or see the ballot. Then duplicate it, change the copy's recipients to the real units and send the copy, because recipients can't be removed after sending. See Voting and surveys: common questions.

Board-only votes: a ballot goes to every owner on each picked unit, including a board member's spouse or co-owner. For ways around this, see Voting and surveys: common questions.

Check the invitation email

The Invitation email card shows the Subject, the Version (Default email or Customized) and what the email Contains. "Each owner sees their own name and voting link."

  1. Click Edit & preview.

  2. Change the subject or the text, and preview it.

  3. Click Save for this ballot.

To go back to PayHOA's wording, click Reset to default, then Reset email. Your edits to this ballot's email are lost.

Unless you change it, the subject is Your vote is needed: {ballot title} and the button reads Cast your vote. The email has a PDF preview of the ballot attached. The button signs the owner in and opens their ballot, so ask owners not to forward the email.

Send the invites and start voting

  1. Click Send invites and start voting, on the Ready to send card or at the top of the page (Send invites).

  2. Check the summary: "Voting opens as soon as the invites go out."

    • Recipients: the number of units.

    • Online invites: "Emailed to every owner with an email on file".

    • Paper ballots: the number of units mailed, or Not used.

    • Voting closes: the end date and time.

  3. You can still edit the invitation email here.

  4. Click Send invites and start voting.

You'll see "Voting started" / "Invites are on their way." While the emails go out, Actions shows Sending invites with a count. The status changes to Voting in progress when they've all gone.

To track votes, send reminders and change the end date, see While voting is open.

What you can change after sending

After you send

Questions and choices

Locked

Voting settings

Locked, except the end date: "Voting is in progress, so only the end date can change."

Recipients

You can add units, but not remove them: "Invitations are out, so units can be added but not removed. Removing a unit would delete its votes."

Invitation email

Already sent. You can resend the ballot to owners who haven't voted.

If something important is wrong, duplicate the ballot, fix the copy and send it, then end the original. See Fix a mistake.

Troubleshooting

You see

What to do

Send invites and start voting is greyed out

Finish every item on Ready to send. Usually the end date is missing or has passed.

"The end date has passed" under Voting settings

Click Change and pick a later Voting end date.

"There was a problem starting the vote."

Refresh the page. If the ballot is still a Draft, try again. If it shows Voting in progress, the invites went out.

"Some settings need a fix before they can be saved."

A setting isn't valid, for example a Custom threshold outside 1–100. Check each section.

"No templates yet. Create one under Voting settings to reuse these choices on future ballots."

If you have no templates, set the options by hand, or create a template first. If you do have templates, close the dialog and open it from Votes: ⋯ on the draft's row → Edit settings.

You applied a template but the Voting method didn't change

Templates don't set the method on a ballot. Pick Online only or Online and paper yourself.

An owner didn't get the invitation

Check that they have an email on file and that their unit is a recipient. Then see Why an owner isn't getting your emails and While voting is open to resend.

What's next

Did this answer your question?