Skip to main content

Website builder overview and first setup

The Website builder makes your association's public website.

M
Written by Michael Bollinger

The Website builder makes your association's public website. You build pages from blocks, such as text, photos, buttons, documents, amenities and contact details. Your edits save to a draft as you go, and visitors see nothing new until you publish. This article shows you around and walks you through the first five steps to a live site.

Before you start: You need Write permission on Website Builder, or to be an admin. Read isn't enough: someone with read-only access doesn't see the Website builder card on Other Tools, and if they open a link to the builder they see "You do not have permission to access the website builder." See Give board members and staff access.

Open the website builder

  1. Click Other Tools in the left menu.

  2. Click Website builder (Build and publish your community website.).

There's no Website builder item in the left menu. Bookmark the page if you use it often.

If your association still has an old Weebly-based website, you see your Weebly site first and the new builder below it, titled New Website Builder. See Legacy Weebly sites and moving to the new builder.

Find your way around

The header holds:

  • A status line, for example All changes saved · Unpublished changes.

  • The clock icon, Version history.

  • Preview, to see the whole draft site.

  • Publish. Its arrow opens Review what will change, View live site and Discard all unpublished changes.

The tabs:

Tab

What you do there

Site settings

Community name, logo, search settings, colors and fonts, this month's visits, and the Danger zone. See Site settings.

Pages

Add, duplicate, hide and delete pages, and open a page to edit it. See Add and manage pages.

Header & menu

The menu across the top of every page, and the buttons at the top right. See Header, menu and footer.

Footer

The strip at the bottom of every page. See Header, menu and footer.

Widgets

The shared lists that community blocks show: documents, amenities, board members, FAQ, Resident Portal, contact details, resale documents and calendars. See Put documents on your website and Widgets.

Domain

Your site's address, and your own domain if you connect one. See Connect your own domain.

AI chatbot

Whether Penny, the website AI chatbot, is on. See The AI chatbot (Penny) on your website.

A New badge shows on Pages, Header & menu, Footer and Widgets until you open each one, or until you close the upgrade notice.

The upgrade notice

The first time you open the builder you see "The website builder got a big upgrade", with a short list of what's new. Each admin sees it once, on new sites as well as older ones. If your site was made before the upgrade, your old site is now your Home page, with all its content, and nothing changes for visitors until you publish. Click Show me my pages to go to Pages, or Got it to close the notice. It comes back each time you open the builder until you close it.

Before the upgrade the builder had three tabs: General Settings, Sections & Content and AI Chatbot. If an older article, video or support answer sends you to one of them:

  • General Settings is now split between Site settings and Domain. The Base domain and Custom domain cards that used to be on General Settings are on the Domain tab.

  • Sections & Content is now Pages. What you built there is your Home page.

  • AI Chatbot is now AI chatbot, and the chatbot is called Penny.

  • The Save menu (Save as draft, Save and preview) is gone. Changes save by themselves, and Preview and Publish are separate buttons.

How draft and live work

Every change saves to your draft as you make it. There's no Save button. Visitors keep seeing the last version you published until you click Publish. Changes reach the live site within about 5 minutes.

The status line tells you where you are:

Status line

What it means

All changes saved · Not published yet (or Never published)

Your site has never been published. Nobody can see it.

All changes saved · Published {date}

Your draft matches the live site.

All changes saved · Unpublished changes

You've changed something since the last publish. Visitors don't see it yet.

All changes saved · Offline since {date}

You took the site offline. Visitors see an offline page. See Take your site offline or start over.

Saving…

A change is saving.

Fix the highlighted fields

A field has a problem, so that change didn't save.

Couldn't save

The change didn't save. Click Retry.

Every publish is kept in Version history, so you can bring back an earlier version. The builder doesn't send any email when you publish. See Preview, publish and version history.

What a new site starts with

A new site has five pages: Home, About, Amenities, Documents and Contact, all in the menu in that order. The header has the Resident Portal button turned on.

Page

What's on it

Home

A welcome banner (Hero), a short text, three cards linking to About, Amenities and Documents, and a Resident Portal call-out

About

Sample text about your community, and a Board members block

Amenities

Your amenities list, and a text block for hours and rules

Documents

Your documents list (empty until you add documents)

Contact

Your contact details, and a text block

The sample text is a placeholder. Replace it before you publish.

Important: The starter About page has a Board members block with Email links on. Each board member's email you add shows on the public website. Turn Email links off in the block unless each person agreed. See Blocks reference.

Set up your site for the first time

Work through these five steps in order.

1. Choose your site's address

Your site lives at an address ending in .site.payhoa.com. PayHOA suggests one from your community name. Check it before you publish, because the box locks while your site is published.

  1. Open the Domain tab.

  2. In Base domain (This is your default website address), type the name under Choose your base domain. Use 3 to 50 lowercase letters, numbers and hyphens.

  3. Check the line "Your website will be live at {name}.site.payhoa.com".

Warning: "Once you set your base domain and publish, it cannot be edited later." Choose a short name residents will recognize. The box stays locked for as long as the site is published. To change the address later you have to take the site offline first. See Take your site offline or start over.

If you see "Oops, that URL is not available. All URLs must be unique.", another website already uses that name. Try another one.

You can connect a domain you own, such as www.oakridgehoa.org, after your first publish. See step 5.

2. Add your name, logo, colors and fonts

On Site settings, set your Community name and logo, then pick Appearance, Primary color and Fonts under Look and feel. See Site settings: name, logo, search, look and feel, and site stats.

3. Edit the starter pages and fill in the widgets

  1. On Pages, click Edit on each page and change its blocks. Add more pages from + Add page. See Add and manage pages and Edit a page.

  2. On Widgets, fill in the lists the community blocks show: documents, amenities, board members, FAQ, contact details and calendars. See Put documents on your website and Widgets.

  3. On Header & menu and Footer, set up the menu, the header buttons and the footer. See Header, menu and footer.

For every block and what it shows, see Blocks reference.

4. Preview and publish

  1. Click Preview and check every page.

  2. Click Publish, read the summary, and click Publish in the dialog.

Your site is live within about 5 minutes. See Preview, publish and version history.

5. Optional: connect your own domain and check Penny

  • To use a domain you own, see Connect your own domain. You need to own the domain at a registrar, such as GoDaddy or Namecheap. PayHOA doesn't sell domains.

  • Penny, the website AI chatbot, answers visitors' questions from the documents you share with it. It can switch itself on once it has documents. See The AI chatbot (Penny) on your website.

Your whole site is public

Anyone on the internet can see every page you publish, without signing in. There are no owner-only or password-protected pages.

  • The Resident Portal button, and the Pay Dues, Requests, Violations and Documents buttons, all open the Resident Portal sign-up and login page. Owners sign in there.

  • Documents you add to the website can be opened by anyone. See Put documents on your website.

  • If you add a Calendar block, events on calendars shared with everyone appear on the public website. New events show up on their own, without a publish. See Widgets.

There's no link to the website from the owner portal. Share the address yourself: in a Broadcast, your newsletter or your welcome packet.

What the builder doesn't do

You want

What to do instead

Pages only owners can see

Not available. Everything on the website is public. Share private files through Documents in PayHOA instead.

A different page as Home

Not available. Home is fixed. Change its blocks instead.

To reorder the Pages list

Not available. Change the order visitors see on Header & menu.

A news feed or blog

Not available. Add a dated Text block, or a News page, for each update.

Contact-form messages in PayHOA

Not available. The Contact form block shows a form from a service such as Google Forms or Jotform. Answers go to your account there. See Blocks reference.

An email when the site publishes

Not available. Check the status line, or click View live site.

To change the .site.payhoa.com address after publishing

Take the site offline, change Base domain on the Domain tab, then publish again. See Take your site offline or start over.

To delete the website

Not available. Take it offline instead. See Take your site offline or start over.

To import your old website

Not available. Copy text, photos and documents into the new pages by hand. To move from another website host, see What does website hosting cost, and how do we move our website from our current host to PayHOA?

Owners or members adding their own photos or posts

Not available. Only admins and people with write permission for the website builder can add content. Collect residents' photos yourself and add them to an Image gallery block, or link a social page in the footer. See Can owners or members share their own photos on the website?

A domain from PayHOA

Not available. Buy one from a registrar, then connect it. See Connect your own domain.

Gable in this module

  • Gable can point you to the right website builder screen and explain what's on it, for example Where do I change my site's menu?

  • Gable can't edit pages, publish your site or set up a domain. Do those in the builder.

  • The chatbot on your public website is Penny, not Gable. Gable is your admin assistant inside PayHOA. See The AI chatbot (Penny) on your website.

For everything Gable can do, how approvals work and how to turn it off, see Gable overview.

Articles in this set

Did this answer your question?