Record feed that went out to a mob, such as barley trail-fed from a silo, silage out of a bunker, a ration, pellets, or hay and straw bales, so the stock comes off on the day and the mob's history shows what it ate. Any mob can be fed this way, not only a mob on a feed plan. For the daily round of mobs on feed, see Run feedlot pens.
Feed a mob in the paddock
Open More → Daily work → Livestock, tap the mob, then More → Feed out. Or use Actions → Feed out and pick the mob. The list puts mobs on feed first, then every other mob, each saying where it is.
Under What went out, choose:
grain or silage kept in Grain & Hay Storage, listed under Grain and silage in storage with its tonnes and the silos or bunkers it is in,
one of your Rations, or
Something else (nothing comes off stock), then type what it was under What was it?, such as pellets. The sheet starts on what that mob was last fed in a paddock.
Under How do you want to enter it?, choose Total fed and enter the Total fed (kg), or Mixer loads and enter the Loads and kg per load. The sheet shows what that is a head, for example "= 37.5 kg a head across 64 head". A self-feeder filled in the paddock goes in as the total.
Check the Date.
Leave Take it off stock (grain or silage) or Deduct ingredients from inventory (a ration) ticked. A ration's ingredients linked to Inventory products come off stock, including bagged supplements and oils (see "Bagged supplements and oils" below).
Check Where the feed comes out of. If the grain is in more than one silo, tap the silo it came out of.
Tap Record (the button shows the amount, such as Record 2.4 t). If a feed still has nowhere to come out of, Phase asks first: Go back to pick the silo or shed, or Record anyway (the feed then waits in Not taken out of a silo yet).
Which silo it comes out of. Grain comes off the silo it was fed out of, and silage off its bunker or pad. Feed kept in one place comes out of it without asking, and the sheet says "From Silo 3, the only place it's kept". Feed kept in more than one place shows each as a button with what it holds, such as Silo 2 · 58.8 t: tap the one it came out of. Phase never picks for you; until you tap one, it waits under "Not taken out of a silo yet". Feeding more than a silo holds on paper still takes it out of that silo, and the sheet says so. If another silo holds some, Take the other … from takes the rest from that silo instead.
A paddock feed is named by what went out, such as "Fed 2.4 t barley", in the mob's history, the feed log and the Feed-out by pen report, and shows under the paddock's name.
Putting out hay or straw bales instead? The sheet has a Hay & straw button at the bottom; see below. Hay and straw never show under Grain and silage in storage.
See what a paddock mob has been fed
Once a mob not on a feed plan has been fed in the last 60 days, its sheet shows Fed in the paddock:
Last fed: the date and what went out.
Last 30 days: the total and kg a head.
Feed cost: with $ a head, priced from what the grain or hay cost in Grain & Hay Storage, or the ration's $/t. Without a price it says "No price yet".
It also has Feed out, Hay & straw and Feed records buttons.
A paddock feed never counts in a feed plan's feed to date, cost or exit, and the round's week of feed leaves it out.
Put hay or straw out for a paddock mob
Hay & straw puts bales out to a mob straight off a stack or shed. Straw kept in Grain & Hay Storage is on the list too.
Open the mob, then More → Hay & straw, or use Actions → Hay & straw and pick the mob. The sheet is titled with the mob, such as Hay & straw · Weaner heifers.
Choose the Hay or straw, and where it Comes out of (a stack or shed, with about how many bales are left).
Enter the Bales, check Kg a bale and the Date, and add a Note if you like.
Tap Put out 3 bales (the button shows your number).
The bales come off that stack. They count as feed put out for the mob, in its history and in Records → Feed under the paddock's name.
Put hay or straw into a pen
Ad-lib hay or straw put out in bales can be recorded as it goes out, so the stack goes down on the day and the cattle's feed counts the real hay.
Open Livestock → Feeding → Pens and tap Hay & straw on the pen's card. On the round, a hay-only pen has Bales out, which opens the same sheet. A mob on feed that is not in a pen has Hay & straw on its own card. The sheet is titled with the pen, such as Hay & straw · Pen 3.
Choose the Hay or straw. The hay the ration feeds ad lib comes up first.
Choose where it Comes out of. The ration's Comes out of order comes up first, and you can change it.
Enter how many Bales and the Date, and a note if you like. The bales are weighed at that stack's own bale weight, shown in Kg a bale. If the stack has no bale weight recorded, enter what a bale weighs. A weight you type is for these bales only. The sheet shows the total before saving, such as "6 bales ≈ 3.7 t".
Leave Take the bales off stock now ticked.
Tap Put out 6 bales (the button shows your number).
The hay comes off that stack straight away. A pen holding two mobs shares the bales between them by head. From then on the hay put out counts as what the cattle ate, in place of the ration's estimate, in the feed to date and its cost. The round and Feed: next 30 days keep estimating hay for the days ahead.
The bales show in Records → Feed as, for example, "6 bales Oaten hay into Pen 3", in the mob's history as their own line, and in the Feed-out by pen report as Hay bales. Saved records and reports still call them hay bales.
They count in Total fed, Days recorded and Feed cost in Records → Feed (costed at the hay's $/t from the ration, or what its lots cost), and in Kg fed and Days fed in the report. They stay out of kg a head a day, which is the mixed ration's, because one put-out of bales lasts several days.
At Exit, the hay true-up starts from the bales. It shows, for example, "6 bales (3,600 kg) put out already", fills in Put out (kg) with them and asks what was left over. It doesn't take those bales off stock again, only any hay used beyond them.
Take back a feed-out or bales entered by mistake
Open the mob and find the feed under History. Tap Remove on a single feed-out, or Show days on a run of days and then Remove on the day. Bales have their own line with Remove. Every feed-out in Records → Feed has Remove too.
Removing a feed-out puts the feed back on stock if it came off. Removing bales puts the hay back on the stack; in a shared pen it removes this mob's share only.
Bagged supplements and oils
A feed-out is weighed in kg. A ration ingredient linked to a product counted in bags, drums or units, or kept in litres, comes off stock too:
Bags, drums or units come off by the product's Bag or drum size: 55 kg of a buffer in 20 kg bags takes 2.75 bags off.
Litres come off by the product's weight per litre: 110 kg of an oil at 0.92 kg/L takes 119.6 L off. Nobody has to look the figure up for a vegetable oil (veg, canola, cottonseed, soy or palm oil, or an oil blend: 0.92 kg/L), molasses (1.4) or glycerine (1.26). Once a day per product a notice says which figure Phase used.
Set both on the product: Inventory → Livestock → the livestock supply → Edit → Bag or drum size, and Weight per litre (kg/L) beside Default unit (only for a blend that weighs differently). See Add products and stock.
Stock comes off in the unit it was received in, so a supply bought in bags comes off in bags even if the product itself was set up in "units".
A product Phase still can't convert is left alone, and a warning (once a day per product) says what to fill in. Feed-outs recorded before 27 October 2026 are not changed.
An ingredient typed into a ration without picking the product never comes off stock. The ration says so on that line: "Not linked to Inventory, so feeding it takes nothing off stock."
Good to know
Hay & straw was called Hay bales until late October 2026. It is the same button in the same places, and nothing is recorded differently.
Recording a second feed-out for the same mob on the same day asks first. Record it as well keeps both. If the first was the mistake, cancel and remove it instead.
For the first days off the truck, a ration can be all hay fed ad lib: in Feeding → Plans → Rations → New ration, tick Fed ad lib on every line. A feeding stage on it shows No mix instead of asking for kg a head, and a pen on it shows Hay only on the round with Bales out. See Rations and feed plans.
If something doesn't look right
The grain or silage isn't in What went out. Only grain kept in a silo, bin or shed, or silage in a bunker or pad, in Grain & Hay Storage is listed. Load it in first (see Add a silo, shed or stack and record what's in it), or choose Something else.
I can't find straw under Feed out. Hay and straw go out with Hay & straw, which the Feed sheet offers underneath.
Hay & straw says there is nothing to put out. Load hay or straw into a stack or shed in Grain & Hay Storage, or add a hay or straw line fed ad lib to the ration.
Hay was counted twice at Exit. A phone on an older version of Phase shows bales put out as an ad-lib true-up and doesn't know about them at Exit. Update the phone before doing an Exit true-up after bales went out, or the hay can be counted, and taken off stock, twice.
Feed cost says "No price yet". Add what the grain or hay cost in Grain & Hay Storage, or a $/t on the ration.