Feeding → Plans in Livestock holds your rations, your feeding regimes (the step-up from induction to full feed, saved once) and the feed needed over the next 30 days. Use this article to build a ration, say which silo or shed its feed comes out of, change the step-up for every pen at once, change one mob's plan, and remove a feed-out entered by mistake.
Quick answers. To change the step-up from induction to full feed for all your pens, save it as a feeding regime and tick the mobs to move onto it. To bring in a new month's mix for every pen on the old one, use Swap a ration. To stop being asked which silo or shed after every pen, set Comes out of, in this order on the ration. Feeding lives only in Livestock: Crop Plan Studio plans paddock crops and has no livestock feeding.
Where to find it
On a computer or a phone, open More → Daily work → Livestock, then the Feeding tab → Plans (beside Round and Pens). It was the Feed plan tab until late October 2026, and old links still land here. Actions → Ration at the top of Livestock opens a new ration.
Plans shows:
Feed: next 30 days (while mobs are on feed): each ingredient the mobs on feed will eat, per day and in total, against what is on hand, with how many days it lasts.
Feeding regimes, with New regime: each regime and how many mobs are on it.
Rations, with New ration (and Swap a ration once there are two or more): each ration with its protein, energy and $/t.
Build a ration
Open Feeding → Plans → Rations → New ration.
Type a Ration name, such as "Finisher 1".
Tap Add ingredient and type its name (barley, lupins, hay). Pick the matching Inventory product from the list to link it. A linked ingredient says Inventory linked with what is on hand. A line typed with no product picked says "Not linked to Inventory, so feeding it takes nothing off stock. Type part of the product's name to pick it." (water is left alone).
Type each ingredient's kilograms per batch. Fill in DM %, ME MJ, CP % and $/t where you know them. Leave $/t blank on a linked product and Phase uses the average price from your recorded purchases.
Tick Fed ad lib for hay or straw always in front of them, with an estimate in kg/hd/day. Tick Grain / concentrate for grain.
Tap Save ration.
This mix shows the ration's protein, energy, dry matter, grain % and cost a tonne. Each ingredient's figures come from Reference values unless you choose My values or Feed test.
Let Phase work out the mix. Open Work the mix out for me. Enter the target Energy (MJ/kg DM), Protein (% CP) and Batch size, then tap Use this mix to put the kilograms on the ingredient rows.
You can set one target and leave the other blank.
With prices entered, Phase picks the lowest-cost mix that reaches the target.
Ingredients missing dry matter, energy or protein are named and left out, not guessed.
When the ingredients can't reach the target, Phase shows the closest mix and why, so you can decide whether another ingredient is needed.
Swap one ration for another from a date. This is the way to bring in a new month's mix.
Open Feeding → Plans → Rations → Swap a ration.
Under Replace, choose the ration going out; under With, the one coming in.
Under From, pick the day it starts (tomorrow to begin with).
Check What changes: each pen fed the old ration, with the day on feed it changes from, and each saved regime that uses it. Untick any to leave alone.
Tap Swap in 6 places (the button counts them).
They keep the same kg/hd, days and way of feeding. The days already fed keep what they were fed.
Change or delete a ration. Tap it in Rations. A ration mobs are on is changed in place: the sheet says how many mobs on feed use it, and saving changes it for them too. Delete removes the recipe; past feed records keep their history. A ration that a mob on feed is using can't be deleted: change that mob's plan first.
Choose where the feed comes out of
When a ration's barley, hay or other feed is kept in more than one silo, shed or stack (in Inventory → Grain & Hay, or the Yield Centre's Storage tab), the ration can say which one it comes out of, so nobody has to say after every pen.
Open Feeding → Plans → Rations and tap the ration.
Under an ingredient linked to Inventory, find Comes out of, in this order.
Choose the first place under Comes out of….
Choose the next place under Then from…, if there is one.
Tap Save ration.
Places holding that feed are listed first, then empty ones of the same kind (silos for grain, sheds and stacks for hay). The arrows move a place up or down; the cross takes it off the list.
Feed kept in only one silo or shed needs no list, even when the shed holds several stacks. The ration says so, for example "Only kept in Hay Shed 1, so its feed comes out of there", and feeding takes the oldest stack first.
When you record feed on the round (or with Record feed on one mob) with the ingredients coming out of stock, Where the feed comes out of shows each feed once, with its kilograms for the whole round, even when the pens are on different rations. Each silo or shed holding it is a button with what it holds, such as Silo 2 · 58.8 t, and a line underneath says what will happen, such as "2.1 t from Silo 1 (empties it), then 60 kg from Silo 2." Phase takes each feed from the first place on the ration's list that has some, then the next, working down the pens in order. The silos go down as soon as you press Fed (or Record feed).
Once every feed has a place, the box folds to one line naming each place, such as "Where the feed comes out of · Barley: Silo 1 then Silo 2 · Oaten hay: Hay Shed 1". Tap Change on that line to see or change them. While a feed still needs a place, or a silo is short on paper, the box stays open; it says how many are left to pick.
The ration has no list yet. If your other rations take that feed from a place, Phase uses the same place, and keeps it on this ration once the feed is saved, so a new ration's hay comes out of the same stack as the old ones' without asking. Otherwise tap the silo or shed the feed came out of. Use this for … next time too is ticked, so the ration keeps your answer and the next feed doesn't ask.
Nothing picked yet when you record. Phase asks first: Go back to pick the silo or shed, or Record anyway. Recorded anyway, the feed waits in Not taken out of a silo yet in Inventory → Grain & Hay (and the Yield Centre's Storage tab), and no silo or shed shows it gone.
Pens on rations that use different places. Each ration keeps its own place, on its own line with its own buttons, under "Each ration on the round takes it from its own place". Nothing needs picking unless one of the rations has no place yet; that ration asks on its own line, and a pick there changes only that ration.
One feed came from somewhere else. Tap that silo's button. It is for this feed only: Use this for … next time too stays unticked unless you tick it. Back to the ration's order undoes it. Undo this pick takes back a pick for a ration that had no place.
More than the place holds on paper. Usually a delivery was never recorded. The box says so, such as "That's 400 kg more than Silo 2 holds on paper. It still comes out of there." That silo then reads empty until its delivery is recorded with Load in in Grain & Hay, or it is counted with Actions → Correct. If another silo holds some, Take the other 400 kg from that silo takes the rest from it, after the ration's own list, for this feed.
None of the listed places holds it. The feed waits in Not taken out of a silo yet in Grain & Hay, to be placed once (see Review storage, correct a stocktake and print reports).
Save your step-up as a feeding regime
A feeding regime is your step-up from induction to full feed, saved once: the stages, how many days each lasts, the kg per head per day and the ration for each.
Open Feeding → Plans → Feeding regimes → New regime.
Give it a Name and choose who it is For: Cattle, Sheep, Goats or Any stock.
Start from Staged induction or Single ration, or tap Step-up for an induction that goes up every few days.
For a step-up, fill in Start kg/hd/day, Go up by kg, Every … days and Full feed kg/hd/day, and choose the Induction ration and Full ration.
Tap Use this step-up to turn it into stages.
Change any stage by hand if you need to: days, kg/hd/day, ration, and Fed by (Mixer / hand-fed or Self-feeder). Only the last stage runs with no end.
Tap Save regime.
A new regime picks no ration and no rate for you: each stage says Choose a ration, and the starter rates (2, 3.5, 5 and 6.5 kg for cattle) show only as grey hints. It can't be saved until every stage has its ration and rate.
For example, 2 kg going up 0.5 kg every 2 days to 6.5 kg makes 9 induction steps over 18 days, then full feed.
Put on feed lists your saved regimes under Which step-up (it picks none for you when there are several). Add to feedlot starts a new mob on your saved regime for that stock (the one changed most recently) and lists your regimes beside Staged induction and Single ration. Edit plan on a mob offers them too.
Move mobs on feed onto a regime
Open Feeding → Plans → Feeding regimes and tap the regime (or build a new one).
Under Change mobs on feed onto this regime, tick the mobs to change. They are listed pen by pen, and Tick all takes every mob on feed. Each shows what it is fed now and what it will be fed from the change.
Pick the day it starts under From.
Tap Save & change 4 mobs (the button counts them). If ticked pens would drop sharply, or go back onto the ration their plan only starts them on, those pens are marked Check: and Phase asks first (Check the feed from that day), naming them, before anything is saved. Go back leaves everything as it was.
The days already fed keep the plan they were on, so feed and cost to date don't change. A mob still in induction carries on at the same day on feed in the new regime. A mob already on full feed goes to the first stage of the new regime that feeds at least as much as it gets now, not back into induction.
Opening a regime ticks the mobs already on it, so saving rolls your change out to them; untick any you want to leave. Deleting a regime doesn't change any mob's plan; new mobs are no longer offered it.
Change one mob's feed plan
Open Feeding → Pens, find the mob on its pen's card (or under On feed, not in a pen) and tap Edit plan. Nothing changes until you tap Save feed plan.
Pen is where the mob is now. Move it with Move and the plan follows.
Head at entry is the head that went on feed. Feed is worked out on the head the mob has now, shown underneath; change that with Change head count on the mob.
Entry date: days on feed count from it. If the mob came in before it was set up in Phase, correct it here. Phase shows the effect, such as "Day on feed counts from here: day 70 today, was day 14." The stages stay as they were and count from the new date, and a regime picked at the same time counts from it too. It can't be after today or after the mob's first recorded feed-out.
A stage still to come or running today: change it and When does the change start? asks for the day (today unless you pick another). It then says what changes, such as "Days 1–10 stay as fed. From day 11: …". To fix a plan that was wrong from the start, tap Correct the plan from the entry date instead; the feed and cost already counted change too.
A stage already fed shows locked, such as "Days 1–4 · fed". Tap Edit to change it, or Undo to put it back. Days with a feed-out recorded keep what was recorded. When you save, Update the days still ahead as well? offers Yes, update days ahead, No, only the days I edited or Back.
Afterwards, a stage changed part way through shows twice: the days at the old rate, then the rest at the new one. Typing over a stage from a saved regime means the mob no longer counts as on that regime.
Remove a feed-out entered twice or by mistake
Records → Feed: every feed-out in the log has Remove.
The mob's history: a single feed-out has Remove. A run of days, such as "Fed 5 days · 4.3 t", has Show days, then each day has Remove. A run with a day entered twice says so, such as "1 day recorded twice".
Removing a feed-out takes it off the feed to date and the feed cost. If it came out of stock, the feed goes back into the silo or shed it came out of. Removing a feed-out can't be undone, so check the date and mob first. Recording a second feed-out for the same mob or pen on the same day asks first; Record it as well keeps both. If the first one was the mistake, cancel and remove it instead.
Good to know
Feed recorded before 8 October 2026 is not moved between silos. Feed already waiting in Not taken out of a silo yet stays there, to be placed once with Take it out in Inventory → Grain & Hay (or Yield Centre → Storage). New feed-outs place themselves.
A ration ingredient kept in bags, drums or litres comes off stock by its bag or drum size, or its weight per litre (see Feed a mob in the paddock or put hay into a pen).
Before 3 October 2026, an edit to a stage already fed was dropped on save. To fix a plan affected by that, tap Edit on each stage already fed, set it to what was fed, and save.
If something doesn't look right
A silo reads empty but still has grain. A delivery was probably never recorded. Record it with Load in in Grain & Hay, or count it with Actions → Correct.
Day on feed is wrong. The mob was probably set up after it came in. Correct its Entry date in Edit plan.